Aleratec 350109 Quick start guide

Aleratec
Brand
Aleratec
Model
350109
Category
Media duplicators
Type
Quick start guide
Quick Start Guide
Welcome!
Congratulations on your purchase of an Aleratec 1:11
HDD Copy Cruiser, considered by industry experts
to be one of the nest Hard Drive duplicators and
sanitizers available.
The entire Aleratec team is committed to providing you
with courteous service. Our knowledgeable staff will
strive to make owning and operating your new Aleratec
1:11 HDD Copy Cruiser a pleasant experience.
This Quick Start Guide will lead you step by step
through the basic operation procedures of your 1:11
HDD Copy Cruiser.
For more detailed information on conguring the
1:11 HDD Copy Cruiser and applying its various
capabilities, please refer to the User Guide on the CD
included.
We at Aleratec appreciate your selection of our
product, and wish you great success and enjoyment of
your new 1:11 HDD Copy Cruiser.
Check out Aleratec online!
www.aleratec.com
www.twitter.com/Aleratec
www.youtube.com/Aleratec
Included Items
• 1:11HDDCopyCruiser
• PowerCord
• UserGuideCD
• QuickStartGuide(thisdocument)
• AleratecRegistrationCard
NOTE: Please store and track the included
software, registration codes and parts carefully.
Requests for replacement software, registration
codes, and/or parts may incur a fee.
Product Features
The1:11HDDCopyCruiserisaHardDiskDriveDuplicatorand
HardDiskDriveSanitizer.
• Sanitizes/Wipesupto12drivescleanwithSecureEraseor
thechoiceofthreeOverwritepatterns:
▪ OnePass
▪ ThreePasswithVerify
▪ SevenPassperDoD5220.22M
• Duplicates/Makesupto11HDDcopiesatonce
• Quickloaddrivebays
• Supports3.5”SATAHDDs
Optional2.5”SATAHDDAdapteravailable(AleratecPart
Number350106)
Key Items on the 1:11 HDD Copy Cruiser
1:11 HDD Copy Cruiser™
SATA Hard Drive Duplicator and Sanitizer Part No. 350109
Controller
Power Switch
Drive LEDs
Display Panel
Target Drive
Bays (11)
Drive Bay
Handle/Tab
Source Drive
Bay (1)
Controller:
ENT
HDD Cruiser
1-11 ver:
ESC
UP arrow is used to
scroll backward through
functions or menus
ESC is used to cancel a
function, or exit a menu
ENT is used to execute a
function, or enter a menu
DOWN arrow is used to
scroll forward through
functions or menus
LCD Display
Warning: This product has a manually switchable
power supply. Make sure that the power supply is
set to the proper voltage for your region.
© 2013 Aleratec, Inc. 9851 Owensmouth Avenue / Chatsworth, CA 91311 U.S.A. Document Number: 9299073_ENG_Rev. B
Specifications subject to change without notice.
Technical Support Addresses and Phone Numbers
• Bye-mail:[email protected]
• ByTelephone:1-818-678-0484 – Skype: support.aleratec.com
TechnicalSupportGroupcanbereached8:00AMto5:00PM,PacificTime,MondaythroughFriday,excludingU.S.holidays.
Pleasetrytocallfromaphonenearyourcomputersystem.
• Accessisavailable24hoursaday,365daysayear,via:
TheWorldWideWebat:www.aleratec.com
FAXat:1-818-678-0483
Summary of Operation
Loading the Hard Drives
1. Openthedrivetraydoorsbyliftingthetabontheleftsideofeachdrivebayyouwishtouse.
2. TaketheHardDiskDrive(HDD)andalignthedrive’sSATAplugtothelowerrighthandsideofthedrivebay.
3. SlidetheHDDintothedrivebayuntilitstops.Thedrivewillstillbeabout1inchoutsideofthebay.Whenthedooriscloseditwillpush
andplugtheHDDintotheduplicator.
4. Swingthedrivebaydoorclosedandpresstheleftsideofthedooruntilthetablatches.Whenitlatches,aclickcanbefeltandheard.
Note:Ifyouareduplicating,thesourceharddiskdrivegoesinthetopbay.
Copy HDD
The“CopyHDD”functionperformsanactualcopyfromasourceHDDtooneormoretargetHDDs.ThetargetHDDsmustbeatleastas
largeasthesource.The1:11HDDCopyCruiserwillcopyeveryblockofcapacityonthesourceHDD.
1. LoadthesourceHDDandthetargetHDDsintothe1:11HDDCopyCruiser.Thesystemwillauto-detecttheharddrives.
Note:BeforecopyingbesurethatthecapacityofthetargetHDDisequaltoorlargerthanthesourceharddrive.
2. PressENTtostartcopying.Thesystemwillauto-detecttheharddrives.
3. Duringthecopyprocessthe1:11HDDCopyCruiserwilldisplayprogressinformation.
Theamountofdataremainingtobetransferred(showningigabytes),andtimewillbedisplayedasthepercentageofcompletion
increases.
Note:Thecopyingspeed,capacityanddurationmayvaryfromonesourceharddrivetoanother.
4. Onceduplicationiscomplete,ajobstatusscreenwillbedisplayed.
ENT ESC
Copy- 36MB/s 0%
235.7GB 1:48
ENT ESC
1. Copy HDD
OK:1 Fail: 0
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Aleratec 350109 Quick start guide

Aleratec
Brand
Aleratec
Model
350109
Category
Media duplicators
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents