GN
RQT8621-B
F0406YM0
Dear customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the
instructions completely. Please keep this manual for future reference.
Operating Instructions
Digital Transmitter & Receiver
Model No. SH-FX60
Designed for Panasonic DVD Home Theater
Sound System compatible with the SH-FX60.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
Printed in Malaysia
Please check and identify the supplied accessory.
∏ 1 AC mains lead
For use with this unit only. Do not use it with other
equipment. Also, do not use cords for other
equipment with this unit.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO
RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL
BE PLACED ON THE APPARATUS.
CAUTION!
≥DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
≥
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
≥DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile
telephone.
The socket outlet shall be installed near the equipment and easily
accessible or the mains plug or an appliance coupler shall remain
readily operable.
System SH-FX60
Digital transceiver SH-FX80T
Wireless system SE-FX60
Accessory
p
∫Avoiding interference
To avoid possible interference, do not place the SH-FX60 near any of the following devices.
The SH-FX60 uses the same radio frequencies as other devices that may be present in your home.
e.g.
The SH-FX60 will automatically seek a clear channel if any of these other devices interfere with its communication. When this happens, the wireless link indicator
(e.g. “ [W] ” or LED) flashes on your home theater unit, and there is a brief interruption in audio coming from the surround speakers.
This is the normal operation of the product working to assure the best possible performance of your Home Theater System.
If the interference persists, try moving the other devices to another location outside the range of the SH-FX60.
2.4GHz-band microwave oven
2.4GHz-band cordless phone
personal computer with 2.4GHz-band wireless LAN
Setup
Preparation
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the AC mains lead after all other connections are complete.
∫Wireless setup diagram
e.g.
Place the wireless system within approximately 10 m from the home theater unit.
[Note[
Do not use the wireless system or the digital transceiver in a metal cabinet or bookshelf.
Home theater unit (with the digital transceiver)
Do not attempt to connect any extra surround speakers
to the home theater unit.
Surround speaker cables
Wireless system
Insert the digital transceiver into the slot of your home
theater unit.
Connecting the digital transceiver
Digital transceiver
Insert fully until you hear a click.
Rear of the home theater unit
Do not insert or remove
while the home theater
unit is on.
e.g.
Connecting the surround speaker cables
to the wireless system
1
If the surround speaker cables have already been connected
Disconnect the surround speaker cables from your
home theater unit.
2
Connect the surround speaker cables to the wireless
system.
AC IN~
L
R
Flip the tab open.
Insert the wire
fully.
i: White
j: Blue
Flip the tab closed.
Click!
To household mains
socket
(AC 230 to 240 V,
50 Hz)
AC mains lead
Surround speaker cable (L)
Surround speaker cable (R)
Refer also to the operating instructions for your home theater unit.
Conserving power
The wireless system consumes a small amount of power when it is in standby
mode (approx. 4 W).
To save power when the unit is not to be used for a long time, unplug it from
the household mains socket.
[Note[
The unit is in the standby condition when the AC power supply cord is
connected. The primary circuit is always “live” as long as the power cord is
connected to an electrical outlet.
Making the wireless link
1
Turn on your home theater unit.
≥Ensure the wireless system is connected to the mains socket.
2
Check the wireless link indicator on the home theater
unit.
W
“ [W] ” or LED should light up on the home
theater unit.
≥If “ [W] ”or LED is flashing, refer to
Troubleshooting guide.
e.g.
AC IN
WIRELESS LINK
AC supply indicator [AC IN]
This indicator lights when the unit is connected
to the AC mains supply.
Lighting Ring
Lights when the wireless link is active.
3
Start play on the home theater unit.
Safety precautions
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions can
damage the cabinet and other components, thereby shortening the unit’s
service life.
Do not place heavy items on the unit.
Do not use high voltage power sources. This can overload the unit and
cause a fire.
Do not use a DC power source. Check the source carefully when setting the
unit up on a ship or other places where DC is used.
Ensure the AC mains lead is connected correctly and not damaged. Poor
connection and lead damage can cause fire or electric shock. Do not pull,
bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead
can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Do not let metal objects fall inside the unit. This can cause electric shock or
malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead and
contact your dealer or an authorized service center. Electric shock or damage
to the unit can occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.
Extend operating life by disconnecting the unit from the power source if it is
not to be used for a long time.
- If you see this symbol-
Placement
Voltage
AC mains lead protection
Foreign matter
Service
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.
Before requesting service, make the following checks. If you are in doubt
about some of the check points, or if the solutions indicated in the table do not
solve the problem, consult your dealer for instructions.
On your home theater unit
Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Wireless module
Frequency range 2.403 to 2.425 GHz
No. of channels 23
RF output power 14 dBm (Max)
Output power
RMS output power: Dolby Digital Mode
Surround Ch 110 W per channel (3 ≠), 1 kHz, 10 % THD
Total RMS Dolby Digital mode power 180 W
DIN output power stereo mode
Surround Ch (both ch driven)
50 W per channel (3 ≠), 1 kHz, 1 % THD
Total DIN stereo mode power 100 W
NAME PLATE IMPEDANCE INDICATION: 3 to 6 ≠
Power supply AC 230 to 240 V, 50 Hz
Power consumption SH-FX80T 0.85 W
SE-FX60 30 W
Dimensions (WtHtD) SH-FX80T 97 mmk47.5 mmk8.5 mm
SE-FX60 89 mmk189 mmk180 mm
Mass SH-FX80T 0.03 kg
SE-FX60 0.7 kg
Operating temperature range r5 oC to r35 oC
Operating humidity range 5% to 90% RH (no condensation)
[Note]
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by a digital spectrum analyzer.
Troubleshooting guide
The wireless
link indicator
(e.g. “ [W] ”
or LED) is
flashing.
≥There is no link between the home theater unit and the
wireless system. Check that the wireless system is
connected to the mains socket.
The wireless
link indicator
(e.g. “ [W] ”
or LED) does
not light.
≥Check that the home theater unit is turned on, and the
wireless system is connected to the mains socket.
≥Ensure that the digital transceiver is fully inserted into the
slot of the home theater unit.
Maintenance
Specifications
RF SECTION
AMPLIFIER SECTION
GENERAL
Power consumption in standby mode 4W
/
