Sink
Sink
Sink
Sink
Rubber
gasket
Rubber
gasket
Rubber
gasket
Rubber
gasket
Rapid Ring plumbers putty
pre-installed! Gently pull
away and SAVE plastic
friction washer BEFORE
setting into sink!
Rapid Ring plumbers putty
pre-installed! Gently pull
away and SAVE plastic
friction washer BEFORE
setting into sink!
Rapid Ring plumbers putty
pre-installed! Gently pull
away and SAVE plastic
friction washer BEFORE
setting into sink!
Rapid Ring plumbers putty
pre-installed! Gently pull
away and SAVE plastic
friction washer BEFORE
setting into sink!
Plastic
friction
washer
Plastic
friction
washer
Plastic
friction
washer
Plastic
friction
washer
Style “A”
Style “A”
Style “A”
Style “A”
1. Remove strainer lock nut.
2. Remove rubber gasket.
3. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and save.
4. Clean sink opening and insert
complete body assembly above
sink through opening. Rapid Ring
plumbers putty pre-installed. Simply
position body centered in sink
opening. Make sure your sink is
compatible with standard plumbers
putty.
5. From under sink, re-install rubber
gasket. Gasket will rest against
bottom of sink.
6. Re-install plastic friction washer.
7. Re-install strainer lock nut and
tighten with a spud wrench.
Note: Putty will begin to compress
against inside of sink bowl. After
assembly is securely tightened,
remove and discard excess putty.
1. Remove strainer lock nut.
2. Remove rubber gasket.
3. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and save.
4. Clean sink opening and insert
complete body assembly above
sink through opening. Rapid Ring
plumbers putty pre-installed. Simply
position body centered in sink
opening. Make sure your sink is
compatible with standard plumbers
putty.
5. From under sink, re-install rubber
gasket. Gasket will rest against
bottom of sink.
6. Re-install plastic friction washer.
7. Re-install strainer lock nut and
tighten with a spud wrench.
Note: Putty will begin to compress
against inside of sink bowl. After
assembly is securely tightened,
remove and discard excess putty.
1. Remove strainer lock nut.
2. Remove rubber gasket.
3. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and save.
4. Clean sink opening and insert
complete body assembly above
sink through opening. Rapid Ring
plumbers putty pre-installed. Simply
position body centered in sink
opening. Make sure your sink is
compatible with standard plumbers
putty.
5. From under sink, re-install rubber
gasket. Gasket will rest against
bottom of sink.
6. Re-install plastic friction washer.
7. Re-install strainer lock nut and
tighten with a spud wrench.
Note: Putty will begin to compress
against inside of sink bowl. After
assembly is securely tightened,
remove and discard excess putty.
1. Remove strainer lock nut.
2. Remove rubber gasket.
3. Remove plastic friction washer.
Gently pull away from Rapid Ring
plumbers putty and save.
4. Clean sink opening and insert
complete body assembly above
sink through opening. Rapid Ring
plumbers putty pre-installed. Simply
position body centered in sink
opening. Make sure your sink is
compatible with standard plumbers
putty.
5. From under sink, re-install rubber
gasket. Gasket will rest against
bottom of sink.
6. Re-install plastic friction washer.
7. Re-install strainer lock nut and
tighten with a spud wrench.
Note: Putty will begin to compress
against inside of sink bowl. After
assembly is securely tightened,
remove and discard excess putty.
Sink
Sink
Sink
Sink
Strainer
lock nut
Strainer
lock nut
Strainer
lock nut
Strainer
lock nut
RP-INS-A
RP-INS-A
RP-INS-A
RP-INS-A
Body assembly
Body assembly
Body assembly
Body assembly
-
1
Prime-Line RP32195OR Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Golden Vantage KS0073 Installation guide
-
Watts 649033BA-8 Installation guide
-
NewAge Products 52014 Operating instructions
-
NewAge Products 60804 User manual
-
Glacier Bay QK008 Installation guide
-
Symmons SLW-4512-1.5 Installation guide
-
Symmons SLW-4512-1.5 Installation guide
-
-
-
CMI 132-6984 Installation guide
