2. Crystorama
  3. KEN-8304-BF
KEN-8304-BF

Crystorama KEN-8304-BF User manual

  • Hello! I am an AI chatbot trained to assist you with the Crystorama KEN-8304-BF User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ASSEMBLYINSTRUCTIONMODEL#KEN-8304-BF
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
1Pc
3Pcs
ROD2=
ROD1=
6”
12”
ROD2
ROD1
5-7/8’’
22-1/2’’
62-1/2’’
18-1/4’’
20-5/8’’
3-1/8’’
3-7/8’’
15-1/4’’
GLASSPANEL
GLASSDIFFUSER
1’’
CLIP
SCREWS
CLIP
METALFRAME
GLASSDIFFUSER
GLASSPANEL
(4PCS)
TOPMETALRING
SOCKET
LIGHTCLUSTER
CENTER
ROD
HANGINGROD
SCREW
COUPLER ROD
Howtoinstall
8.Determinethepreferredhangingheightandadjustthe
requiredrods.
10.Slipcanopykitalongwireandthreaditintothetopofthe
rodassembly.
12.Installthebulb(notincluded)intothesocket.
9.Feedthewiresthroughtherodsandconnectthemtogether.
6.Separatethemountingplatefromthecanopykitbyremoving
thescrews.
7.Installthemountingplatetotheoutletboxusingtwooutlet
boxscrews.
11.Installcanopyontothemountingplate,andsecurewiththe
mountingscrews.
This fixture is Damp rated
Youwillneed4-MediumBaseBulb
60WattsRecommended100WattsMax.
USELEDBULBSFOREXTENDEDUSE
1.Slidetheglassdiffuserontothebottomofmetalframeand
secureitwithclips.
2.Slidetheglasspanelsinsidethemetalframeandsecureit
withclips.
3.Slipthecenterrodassemblyalongwireandthreadontothe
nipplelocatedonthetopofthelightcluster.
4.Insertthehangingrodintothesideholesoftopboxonthe
centerrod,andsecurethehangingrodfromthetopwiththe
screws.
5.Putthetopmetalringoverthemetalframe.Lineupthehole
onthebottomofhangingrodwiththeholeonthetopmetal
ringandthebracketonthemetalframe,and secureitwith
screws.
BRACKET
Crystorama.com
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
C.(1)-CanopykitW5-7/8’’xH1’’ #XRF8303BFCAN5.875IN
G.(1)-Coupler
F.(3)-RodD5/8’’xL12’’ #XRF8303BFROD12IN
D.(2)-Mountingscrew
E.(1)-RodD5/8’’xL6’’ #XRF8303BFROD6IN
ASSEMBLYINSTRUCTIONMODEL#KEN-8304-BF
I.(1)-Centerrodassembly#XRF8304BFSTEM
B.(1)-Mountingplate
J.(4)-HangingrodD3/8’’xH12-1/8’’ #XRF8304BFSIDEROD
K.(1)-Lightcluster
L.(1)-Topmetalring
M.(4)-Glasspanel
N.(1)-Glassdiffuser#XRF8304DIFF20.625IN
O.(1)-Metalframe
P.(4)-Screw
C
B
A
D
E
F
H
J
I
K
L
M
N
O
P
H.(4)-Screw
G
Crystorama.com
/