2. Crystorama
  3. 2441-OP-BN

Crystorama 2441-OP-BN User manual

  • Hello! I've reviewed the assembly instructions for the Crystorama 2441-OP-BN light fixture. This document includes information on installation steps, bulb requirements, and safety warnings, including a notification about lead content. I'm ready to answer any questions you have about assembling or using this product.
  • What type of bulb is needed for this fixture?
    What is the recommended wattage for the bulb?
    What is the mounting procedure?
ASSEMBLYINSTRUCTIONMODEL#2441-OP-BN
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
4.Installthebulb(notincluded)intosocket.
Howtoinstall
2.Installbackplateontothemountingplate,and
securewiththescrews.
3.Installtheglassshadeoverthesocket,and
securewiththesocketring.
1.Installthemountingplatetotheoutletboxusing
twooutletboxscrews.
Youwillneed1-MediumBaseBulb
60WattsRecommended100WattsMax.
USELEDBULBSFOREXTENDEDUSE
6’’
FRONTVIEW
SIDEVIEW
3-5/8’’
5-3/4’’
4-7/8’’
9-3/4’’
1-3/8’’
10-3/4’’
2-1/2’’
This fixture is Damp rated
Crystorama.com
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-Mountingplate
F.(1)-Glassshade#XRF2441SHA6IN
E.(1)-Socket
C.(1)-BackplateL4-7/8’’xW4-7/8’’xD1-3/8’’ #XRF2441BNBKP4.875IN
D.(2)-Screw
ASSEMBLYINSTRUCTIONMODEL#2441-OP-BN
G.(1)-Socketring
A
B
D
C
E
F
G
Crystorama.com
/