Tyan S7052WGM3NR User manual

http://www.tyan.com

1

S7052

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

http://www.tyan.com

3

Contents

Before you begin…....................................................................................4

Chapter 1: Instruction ................................................................................5

1.1 Congratulations .................................................................................5

1.2 Hardware Specifications..................................................................5

1.3 Software Specifications...................................................................13

Chapter 2: Board Installation................................................................... 15

2.1 Board Image....................................................................................16

2.2 Block Diagram ...............................................................................17

2.3 Board Parts, Jumpers and Connectors...........................................18

2.4 Installing the Processor and Heat sink............................................31

2.5 Thermal Interface Material ..............................................................34

2.6 Tips on Installing Motherboard in Chassis ......................................35

2.7 Installing the Memory ......................................................................37

2.8 Attaching Drive Cables....................................................................43

2.9 Installing Add-In Cards....................................................................44

2.10 Connecting External Devices ........................................................45

2.11 Installing the Power Supply...........................................................46

2.12 Finishing Up...................................................................................46

Chapter 3: BIOS Setup .............................................................................47

3.1 About the BIOS................................................................................47

3.2 Main Menu.......................................................................................49

3.3 Advanced Menu...............................................................................50

3.4 Chipset Menu ..................................................................................72

3.5 Boot .................................................................................................85

3.6 Security............................................................................................87

3.7 Server Management........................................................................88

3.8 Event Logs.......................................................................................91

3.9 Save & Exit......................................................................................92

Chapter 4: Diagnostics............................................................................. 95

4.1 Flash Utility......................................................................................95

4.2 AMIBIOS Post Code (Aptio)............................................................96

Appendix: Fan and Temp Sensors........................................................103

Glossary................................................................................................... 107

Technical Support ..................................................................................113

http://www.tyan.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S7052 Motherboard

6 x SATA Cable

1 x COM Port Bracket Cable

1 x USB dual-port Bracket Cable

1 x IO shielding

1 x S7052 User’s manual

1 x S7052 Quick reference guide

1 x TYAN

®

Driver CD

IMPORTANT NOTE:

Sales sample may not come with the accessory listed above.

Please contact your sales representative to help order accessory for your

evaluation.

http://www.tyan.com

5

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S7052 motherboard, based on the

Intel

®

Patsburg chipset. The S7052 is designed to support dual Intel

®

Xeon E5-

2600 Series processors, and up to 512GB RDIMM, 128GB UDIMM and 768GB

LRDIMM DDR3 memory. Leveraging advanced technology from Intel

®

, the

S7052 is capable of offering scalable 32 and 64-bit computing, high-bandwidth

memory design, and lightning-fast PCI-E bus implementation.

The S7052 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provides the S7052 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can

find all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

TYAN S7052 (S7052GM3NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 135W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel Patsburg C600 series

Supported DIMM

Qty

(12)+(12) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800/1066/1333/1600*

RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &

UDIMMs, LRDIMMs

Capacity

Up to 512GB RDIMM/128GB UDIMM/768GB

LRDIMM

Memory channel

4 Channels per CPU / Support 3 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

http://www.tyan.com

6

Expansion Slots PCI-E (1) PCI-E Gen.3 x4 slot / (3) PCI-E Gen.3 x8 slots

Recommended

Barebone /

Chassis

Mechanical

Compliant

KGN70 chassis kit

Port Q'ty (3)

LAN

Controller Intel 82574L / Intel I350AM2

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel Patsburg

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,

(4) 3.0 Gb/s (mini-SAS)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

USB

(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A

onboard)

COM (1) port (rear)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (3) GbE ports

Power

SSI 24-pin + 8-pin + 8-pin power connectors / SSI

EEB spec. 2008

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (6) SATA-III and (4) SATA-II connectors

Chipset Nuvoton 83773G

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (7) 4-pin headers

Temperature

Monitors temperature for CPU & system

environment

System

Monitoring

Others Watchdog timer support

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100 Mb/s

MAC interfaces

Brand / ROM size 8MB / AMI

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

http://www.tyan.com

7

Operating System OS supported list

Please visit the Tyan’s Web site for the latest

update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Compliant

Yes

Motherboard (1) S7052 Motherboard

Manual

(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.

Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

SATA (6) SATA signal cables

USB (1) 2-port USB bracket cable

Package Contains

Cable

COM (1) COM port cable

TYAN S7052 (S7052GM5NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 135W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel Patsburg C600 series

Supported DIMM

Qty

(12)+(12) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800/1066/1333/1600*

RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &

UDIMMs, LRDIMMs

Capacity

Up to 512GB RDIMM/128GB UDIMM/768GB

LRDIMM

Memory channel

4 Channels per CPU / Support 3 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

Expansion Slots PCI-E (1) PCI-E Gen.3 x4 slot / (3) PCI-E Gen.3 x8 slots

Recommended

Barebone /

Chassis

Mechanical

Compliant

KGN70 chassis kit

http://www.tyan.com

8

Port Q'ty (5)

LAN

Controller Intel 82574L / Intel I350AM4

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel Patsburg

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,

(4) 3.0 Gb/s (mini-SAS)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

USB

(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A

onboard)

COM (1) port (rear)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (5) GbE ports

Power

SSI 24-pin + 8-pin + 8-pin power connectors / SSI

EEB spec. 2008

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (6) SATA-III and (4) SATA-II connectors

Chipset Nuvoton 83773G

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (7) 4-pin headers

Temperature

Monitors temperature for CPU & system

environment

System

Monitoring

Others Watchdog timer support

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100 Mb/s

MAC interfaces

Brand / ROM size 8MB / AMI

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list

Please visit the Tyan’s Web site for the latest

update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

http://www.tyan.com

9

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Compliant

Yes

Motherboard (1) S7052 Motherboard

Manual

(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.

Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

SATA (6) SATA signal cables

USB (1) 2-port USB bracket cable

Package Contains

Cable

COM (1) COM port cable

TYAN S7052 (S7052WGM3NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 135W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH

Intel Patsburg C600 series / Upgrade ROM module

onboard

Supported DIMM

Qty

(12)+(12) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800/1066/1333/1600*

RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &

UDIMMs, LRDIMMs

Capacity

Up to 512GB RDIMM/128GB UDIMM/768GB

LRDIMM

Memory channel

3 Channels per CPU / Support 3 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

Expansion Slots PCI-E (1) PCI-E Gen. 3 x4 slot / (3) PCI-E Gen.3 x8 slots

Recommended

Barebone /

Chassis

Mechanical

Compliant

KGN70 chassis kit

Port Q'ty (3)

LAN

Controller Intel 82574L / Intel I350AM2

http://www.tyan.com

10

Connector (2) Mini-SAS connectors (totally support 8 ports)

Controller Intel Patsburg

Speed 3.0 Gb/s

SAS

RAID RAID 0/1/10

Connector (6) SATA + (2) mini-SAS

Controller Intel Patsburg

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,

(8) 3.0 Gb/s (4-in-1 mini-SAS connector)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

USB

(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A

onboard)

COM (1) port (rear)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (3) GbE ports

Power

SSI 24-pin + 8-pin + 8-pin power connectors / SSI

EEB spec. 2008

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Chipset Nuvoton 83773G

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (5) 4-pin headers

Temperature

Monitors temperature for CPU & system

environment

System

Monitoring

Others Watchdog timer support

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

AST2300 iKVM

Feature

24-bit high quality video compression / Dual 10/100

Mb/s MAC interfaces

Server

Management

AST2050 IPMI

Feature

Supports storage over IP and remote platform-flash

Brand / ROM size 8MB / AMI

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

http://www.tyan.com

11

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list

Please visit the Tyan’s Web site for the latest

update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Compliant

Yes

Motherboard (1) S7052 Motherboard

Manual

(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.

Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

SATA (6) SATA signal cables

USB (1) 2-port USB bracket cable

Package Contains

Cable

COM (1) COM port cable

TYAN S7052 (S7052WGM5NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 135W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH

Intel Patsburg C600 series / Upgrade ROM module

onboard

Supported DIMM

Qty

(12)+(12) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800/1066/1333/1600*

RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &

UDIMMs, LRDIMMs

Capacity

Up to 512GB RDIMM/128GB UDIMM/768GB

LRDIMM

Memory channel

3 Channels per CPU / Support 3 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

http://www.tyan.com

12

Expansion Slots PCI-E (1) PCI-E Gen.3 x4 slot / (3) PCI-E Gen.3 x8 slots

Recommended

Barebone /

Chassis

Mechanical

Compliant

KGN70 chassis kit

Port Q'ty (5)

LAN

Controller Intel 82574L / Intel I350AM4

Connector (2) Mini-SAS connectors (totally support 8 ports)

Controller Intel Patsburg

Speed 3.0 Gb/s

SAS

RAID RAID 0/1/10

Connector (6) SATA + (2) mini-SAS

Controller Intel Patsburg

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,

(8) 3.0 Gb/s (4-in-1 mini-SAS connector)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

USB

(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A

onboard)

COM (1) port (rear)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (5) GbE ports

Power

SSI 24-pin + 8-pin + 8-pin power connectors / SSI

EEB spec. 2008

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (4) SATA-II and (2) SATA-III connectors

Chipset Nuvoton 83773G

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (5) 4-pin headers

Temperature

Monitors temperature for CPU & system

environment

System

Monitoring

Others Watchdog timer support

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

AST2300 iKVM

Feature

24-bit high quality video compression / Dual 10/100

Mb/s MAC interfaces

Server

Management

AST2050 IPMI

Feature

Supports storage over IP and remote platform-flash

http://www.tyan.com

13

Brand / ROM size 8MB / AMI

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list

Please visit the Tyan’s Web site for the latest

update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Compliant

Yes

Motherboard (1) S7052 Motherboard

Manual

(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.

Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

SATA (6) SATA signal cables

USB (1) 2-port USB bracket cable

Package Contains

Cable

COM (1) COM port cable

1.3 Software Specifications

For the latest OS (operation system) support and IPMI Configuration Guide, please

visit the Tyan’s Web site for information.

http://www.tyan.com

14

NOTE

http://www.tyan.com

15

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than

7kgf/cm (6.09 lb/in) on each mounting screw for

motherboard installation.

2. Do not apply power to the board if it has been

damaged.

http://www.tyan.com

16

2.1 Board Image

S7052

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

17

2.2 Block Diagram

S7052 Block Diagram

http://www.tyan.com

18

2.3 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. But

for the DIMM number please refer to the above placement for memory installation.

For the latest board revision, please visit our web site at http://www.tyan.com

.

http://www.tyan.com

19

Jumpers & Connectors

Jumper/Connector Function

J2 (PWRCONN4) SSI 8-pin CPU1 Power Connector

J3/J4/J6/J71/J75/J76/J77 4-pin Fan Connector

J5/LED1 ID LED and Button

J10 IPMB Connector

J22 Front Panel Connector

J24/J25/J33 LAN3/LAN4/LAN5 LED Header

J27 (USB7) Vertical (Type A) USB Connector

J30 (COM2) COM2 Header

J34 Reserved for BB Fan Board

J42 Port 80 Header

J43 Clear CMOS Jumper

J51 SATA/SAS Connector

J52 Mini SAS Connector

J53 ATX 24-pin Power Connector

J54 Patsburg Upgrade ROM Module Header

J55 Chassis Intrusion Header

J57/J58 USB Front Panel Header (blue)

J59 SAS SMBus Pin Header

J63 PSMI Connector

J64 (PWRCONN3) SSI 8-pin CPU0 Power Connector

J70 SATA SGPIO Pin Header

J78 BIOS Overwrite Jumper

J79 ME Firmware Update Header

J80 SAS Software RAID Key Header

SATA0/SATA1 SATA3 Connector

SATA2/SATA3/SATA4/SATA5 SATA2 Connector

Jumper Legend

OPEN - Jumper OFF

Without jumper cover

CLOSED - Jumper ON

With jumper cover

http://www.tyan.com

20

J3

J22

J77

J76

J75

J71

J42

J4

J6

J30

Page is loading ...

Tyan S7052WGM3NR User manual

This manual is also suitable for

Tyan S7052WGM3NR User manual

Related papers

Other documents