Tyan S7010 User manual

Category
Servers
Type
User manual
http://www.tyan.com
1
S7010
Version 1.1a
Copyright
Copyright © 2010 MiTAC International Corporation. All rights reserved. TYAN
®
is a
registered trademark of MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN
®
is a trademark of MiTAC International Corporation.
Intel
®
5500 Series and combinations thereof are trademarks of Intel Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft, Windows are trademarks of Microsoft Corporation.
SuSE is a trademark of Novell.
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
2
http://www.tyan.com
Table of Contents
Check the box contents! 3
Chapter 1: Introduction
1.1 Congratulations 5
1.2 Hardware Specifications 5
1.3 AST2050 8
Chapter 2: Board Installation
2.1 Board Image 9
2.2 Block Diagram 10
2.3 Board Parts, Jumpers and Connectors 11
2.4 Installing the Processor and Heatsink 22
2.5 Thermal Interface Material 24
2.6 Finishing Installing the Heatsink 25
2.7 Tips on Installing Motherboard in Chassis 26
2.8 Installing the Memory 27
2.9 Attaching Drive Cables 31
2.10 Installing Add-in Cards 32
2.11 Installing I/O Shield 33
2.12 Connecting External Devices 34
2.13 Installing the Power Supply 35
2.14 Finishing up 35
Chapter 3: BIOS Setup
3.1 BIOS Main Menu 39
3.2 Advanced Menu 40
3.3 PCI PnP Menu 70
3.4 Boot Menu 72
3.5 Security Menu 76
3.6 Chipset Menu 77
3.7 Exit Menu 83
Chapter 4: Diagnostics
4.1 Beep Codes 85
4.2 Flash Utility 85
4.3 AMI BIOS Post Code 86
Glossary
89
Technical Support
95
3
http://www.tyan.com
Check the box contents!
1x S7010 motherboard
6 x Serial ATA Cable
1 x USB2.0 cable
1 x IEEE1394 Cable
1 x S7010 user’s manual
1 x S7010 Quick Reference guide
1 x IO Shield Installation guide
1 x TYAN driver CD
1 x I/O shield
1 x Audio cable (optional, P/N # 422774700001)
3 x Serial ATA power cable (optional, P/N # 332810000275)
SAS Cable (optional, P/N # 422763500002)
1x Serial Port Cable (optional, P/N # 422749400001)
If any of these items are missing, please contact your vendor/dealer for
replacement before continuing with the installation process.
NOTE: Please contact your vendor for optional cables purchase.
4
http://www.tyan.com
NOTE
5
http://www.tyan.com
Chapter 1: Introduction
1.1 - Congratulations
You have purchased one of the most powerful server solutions. Based on Intel
®
5520 (36D/24D) and Intel
®
82801JIR ICH10/R chipsets, the S7010 is designed to
support up to two Nehalem-EP 5500/5600 Series processors and up to 96GB
DDR3-800/1066/1333 memory, providing a rich feature set and incredible
performance. Leveraging advanced technology from Intel, the S7010 is capable of
offering scalable 32 and 64-bit computing, high-bandwidth memory design, and
lightning-fast PCI-E bus implementation.
The S7010 not only empowers your company in today’s demanding IT environment
but also offers a smooth path for future application usage. All of this provides the
S7010 the power and flexibility to meet the needs of nearly any server application.
Remember to visit TYAN’s Website at http://www.tyan.com. There you can find
information on all of TYAN’s products with FAQs, online manuals and BIOS
upgrades.
1.2 - Hardware Specifications
Supported CPU Series
Intel Xeon 5500/5600 series QC/DC processors
Socket Type / Q'ty LGA1366 / (2)
Max CPU wattage 130W
Processor
System Bus (MHz) Intel QuickPath Interconnect (QPI) 6.4GT/s
IOH / ICH Intel 5520 / ICH10R
Chipset
Super I/O Winbond W83627
Supported DIMM Qty (12) DIMM sockets
DIMM Type / Speed DDR3 800/1066/1333 RDIMM, UDIMM
Capacity Up to 96GB at launch w/ quad rank RDIMMs
Memory
Memory channel 3-Channel
PCI-E
(1) PCI-E x16 slot (Gen 2) / (2) PCI-E x8 slots (Gen 2)
/ (1) PCI-E x4 slot (Gen 1)
PCI (1) PCI 32 bit slot
Expansion
Slots
Recommended Tyan
Riser Card
M2083-RS, PCI-E x16 1U riser card (left) / M2061,
PCI-E x8 to PCI-X 1U riser (left)
6
http://www.tyan.com
Port Q'ty (2)
LAN
Controller Intel 82574
Connector (6)
Controller ICH10R
Speed 3.0 Gb/s
Storage SATA
RAID S/W RAID 0/1/10/5 standard/Windows only
Chipset Realtek ALC262
Audio
Feature HDA 2.0 spec.compliant
Port Q’ty (2)
FireWire
Chipset VIA VT 6308
Connector type D-Sub 15pin
Resolution 1600x1200
Graphic
Chipset Aspeed AST2050
USB (6) USB2.0 ports (4 at rear, 2 via cable)
COM (2) ports (1 at rear, 1 via cable)
VGA (1) D-Sub 15pin VGA port
Audio
(1) 2x5 pin header / (1) CD-IN header / (1) Audio front
panel header
RJ-45 (2) GbE ports
Firewire (2) 2x5 pin header
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12 pin SSI Front Panel header
Input
/Output
SATA (6) SATAII connectors
Chipset Winbond W83793G
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan Total (5) 4-pin headers
Temperature Monitors temperature for CPU & system environment
System
Monitoring
LED Fan fail LED indicator
7
http://www.tyan.com
Others Chassis intrusion detection / Watch Dog timer support
Onboard Chipset Onboard Aspeed AST2050
AST2050 IPMI Feature
IPMI 2.0 compliant baseboard management controller
(BMC) / Supports storage over IP and remote
platform-flash/ BIOS update / USB 2.0 virtual Hub
Server
Management
AST2050 iKVM
Feature
24bit High quality video compression / Dual 10/100
Mb/s MAC interfaces
Brand / ROM size AMI / 4MB
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/PXE Boot / ACPI 2.0 power management /Power on
mode after power recovery / User-configurable H/W
monitoring / Auto-configurable of hard disk types /
Multiple boot options
Form Factor SSI EEB
Form Factor
Board Dimension 12"x13" (305x330mm)
Operation
System
OS supported list
Please visit our Web site for the latest OS supported
list.
FCC (Doc) Class B
CE (Doc) Yes
C-Tick Yes
Regulation
VCCI Yes
Operating Temp 10° C ~ 35° C (50° F~ 95° F)
Non-operating Temp - 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Complaint Yes
Motherboard (1) TYAN motherboard
Manual (1) User's manual / (1) Quick Ref. Guide
Installation CD (1) TYAN Installation CD
I/O Shield (1) I/O Shield
SATA (6) SATA signal cables
USB (1) USB bracket cable
Accessory
list
Cable
IEEE1394 (1) IEEE1394 bracket cable
Optional
accessories
Riser Card
M2083-RS, PCI-E x16 1U riser card (right) / M2061,
PCI-E x8 to PCI-X 1U riser card (left)
8
http://www.tyan.com
accessories
for future
upgrade
Cable
(1) CCBL-0615, COM port cable
(1) Audio bracket cable
1.3 - AST2050
Please visit the TYAN Web Site at http://www.tyan.com to download the latest
AST2050 User’s Guide.
9
http://www.tyan.com
Chapter 2: Board Installation
You are now ready to install your motherboard. The mounting hole pattern of the
S7010 matches the SSI EEB specification. Before continuing with installation,
confirm that your chassis supports an SSI EEB motherboard.
How to install our products right… the first time
The first thing you should do is reading this user’s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, TYAN recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antistatic
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
NOTE
DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN
DAMAGED.
10
http://www.tyan.com
2.1 - Board Image
S7010
This picture is representative of the latest board revision available at the time of
publishing. The board you receive may or may not look exactly like the above
picture.
11
http://www.tyan.com
2.2 - Block Diagram
S7010AGM2NRF
12
http://www.tyan.com
2.3 - Board Parts, Jumpers and Connectors
S7010AGM2NRF
This diagram is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above diagram.
Jumper Legend
ï‚©ï‚©
OPEN - Jumper OFF, without jumper cover
ï‚©ï‚©
CLOSED – Jumper ON, with jumper cover
13
http://www.tyan.com
Jumper/Connector Function
J44 Front Panel Connector
J17/J19 1394 Front Panel Header (black)
J27/J28 USB Front Panel Header (blue)
J8 COM2 Connector
J41 IPMB Connector
J45 Chassis Intrusion Header
J4 Intel HD Audio Header
J6 Specific Definition Audio Header
USB5 Type-A USB Connector
J1 CD_IN Connector
J35 PSMI Connector
J38 ICH SGPIO Header
J43 (BTO) SAS SGPIO Header
J46/J47/J48/J49/J50 8-pin 4096 Fan Connector
J9/J14/J39/J40/J42 4-pin Fan Connector
J7
BMC Reset Jumper
NC: Default
Pin 1-2 closed: Disable BMC
JP1
Clear CMOS Jumper
Pin 1-2 closed: Normal (Default)
Pin 2-3 closed: Clear
JP2/JP3
COM2 Switch Jumper
Pin 1-2 closed: SIO to COM2 (Default)
Pin 2-3 closed: BMC UART2 to COM2
JP4
Onboard 1394 Enable/Disable Jumper
Pin 1-2 closed: Enable (Default)
Pin 2-3 closed: Disable
14
http://www.tyan.com
J35: PSMI Connector
1
Pin Signal Pin Signal
1 SMB_CLK 2 SMB_DAT
3 SMBALERT 4 GND
5 V3P3
J27 J28
J4
J6
(from left to right)
SATA5/SATA4/SATA3/SATA2/SATA1/SATA0
JP4
J35
15
http://www.tyan.com
FPAUD1 (J6): Specific Definition Audio Header
1112
2
1
TYAN
does not provide cables for this header.
Pin Signal Pin Signal
1 MIC_L_IN 2 MIC_R_IN
3 GND 4 MIC_JD
5 LINE_IN_L 6 LINE_IN_R
7 KEY 8 LINE_IN_JD
9 LINE_OUT_L 10 LINE_OUT_R
11 NC 12 LINE_OUT_JD
FPAUD2 (J4): Intel HD Audio Header
10
2
9
1
TYAN
does not provide cables for this header.
Pin Signal Pin Signal
1 MIC_L_IN 2 GND
3 MIC_R_IN 4 NC
5 LINE_R_IN 6 MIC_JD
7 GND 8 KEY
9 LINE_L_IN 10 LINE_JD
J27/J28: USB Front Panel Header (Blue)
10 2
9
1
Pin Signal Pin Signal
1 +5V 2 +5V
3 USB D- 4 USB D-
5 USB D+ 6 USB D+
7 GND 8 GND
9 KEY 10 GND
SATA0/1/2/3/4/5: Serial ATA Connector
7 GND
6 RXP
5 RXN
4 GND
3 TXN
2 TXP
7
1
1 GND
Connects to the Serial ATA ready drives via the
Serial ATA cable.
SATA0: J26 SATA1: J25
SATA2: J24 SATA3: J22
SATA4: J21 SATA5: J20
JP4: Onboard 1394 Jumper
3
1
Pin 1-2 Closed: Enable 1394 (Default)
3
1
Pin 2-3 Closed: Disable 1394
16
http://www.tyan.com
J44
J8 J17 J19
J41
17
http://www.tyan.com
COM2 (J8): COM2 Connector
1
2
1
0
9
Pin Signal Pin Signal
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 KEY
J44: Standard Front Panel Connector
2
4
2
1
23
NOTE1: +3.3V power rail is IDLED, WLED (Warning LED),
LANLED
NOTE2: +5V power rail is PWRLED, HDLED
Pin Signal Pin Signal
1 PWRLED+ 2 +3VSB
3 KEY 4 IDLED+
5 PWRLED- 6 IDLED-
7 HDLED+ 8 WLED-
9 HDLED- 10 PSU_WLED-
11 PWRSW+ 12 LAN1LED+
13 GND 14 LAN1LED-
15 RSTSW 16 SMBDAT
17 GND 18 SMBCLK
19 IDLED_SW 20 INTRD#
21 GND 22 LAN2LED+
23 NMI_SW- 24 LAN2LED-
J17/J19: 1394 Front Panel Header (Black)
10
9
2
1
Pin Signal Pin Signal
1 XTPA 0/1P 2 XTPA 0/1M
3 GND 4 GND
5 XTPB0P 6 XTPB0M
7 1394PWR 1/2 8 1394PWR 1/2
9 KEY 10 GND
J41: IPMB Connector
1
Pin Signal Pin Signal
1 IPMB DATA 2 GND
3 IPMB CLK 4 NC
18
http://www.tyan.com
USB5
J45
J42
J14
J39
J40
J9
J1
PW2
J50
J49
J48
J47
J46
19
http://www.tyan.com
J9/J14/J39/J40/J42: 4-pin Fan Header
+12V
PWM Control
GND
Tachometer
1
+12V
PWM Control
GND
Tachomete
r
1
Use this header to connect the
cooling fan to your
motherboard to keep the
system at optimum
performance levels.
J46/J47/J48/J49/J50: 8-pin 4096 Fan Header
Pin Signal Pin Signal
1 PWM1 2 +12V
3 TACH1 4 GND
5 GND 6 TACH2
7 +12V 8 PWM2
J1: CD_IN Audio Header
1
4
TYAN does not provide cables for this header.
Pin Signal Pin Signal
1 CD_IN_L 2 GND
3 GND 4 CD_IN_R
J45: Chassis Intrusion Header
1
Pin Signal Pin Signal
1 INTRUDER# 2 GND
PW2: Aux. Power Connector for Riser Card M2061-R
1
Pin Signal Pin Signal
1 +12V 2 GND
3 GND 4 +5V
USB5: Type-A USB Connector
Pin Signal Pin Signal
1 +5v 2 USB D-
3 USB D+ 4 GND
20
http://www.tyan.com
J38
J43
JP2
JP3
J7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

Tyan S7010 User manual

Category
Servers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI