2. Computers & electronics
  3. Computers
  4. PC/workstation barebones
  5. Tyan
  6. S7052

Tyan S7052, S7052GM3NR, S7052GM5NR, S7052WGM3NR, S7052WGM5NR User manual

  • Hello! I am an AI chatbot trained to assist you with the Tyan S7052 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
http://www.tyan.com
1
S7052
Version 1.0
Copyright
Copyright © 2012 MiTAC International Corporation. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN
®
is a trademark of MiTAC International Corporation.
Intel
®
is a trademark of Intel
®
Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft
®
, Windows
®
are trademarks of Microsoft Corporation.
Winbond
®
is a trademark of Winbond Electronics Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN
®
products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
http://www.tyan.com
2
http://www.tyan.com
3
Contents
Before you begin…....................................................................................4
Chapter 1: Instruction ................................................................................5
1.1 Congratulations .................................................................................5
1.2 Hardware Specifications..................................................................5
1.3 Software Specifications...................................................................13
Chapter 2: Board Installation................................................................... 15
2.1 Board Image....................................................................................16
2.2 Block Diagram ...............................................................................17
2.3 Board Parts, Jumpers and Connectors...........................................18
2.4 Installing the Processor and Heat sink............................................31
2.5 Thermal Interface Material ..............................................................34
2.6 Tips on Installing Motherboard in Chassis ......................................35
2.7 Installing the Memory ......................................................................37
2.8 Attaching Drive Cables....................................................................43
2.9 Installing Add-In Cards....................................................................44
2.10 Connecting External Devices ........................................................45
2.11 Installing the Power Supply...........................................................46
2.12 Finishing Up...................................................................................46
Chapter 3: BIOS Setup .............................................................................47
3.1 About the BIOS................................................................................47
3.2 Main Menu.......................................................................................49
3.3 Advanced Menu...............................................................................50
3.4 Chipset Menu ..................................................................................72
3.5 Boot .................................................................................................85
3.6 Security............................................................................................87
3.7 Server Management........................................................................88
3.8 Event Logs.......................................................................................91
3.9 Save & Exit......................................................................................92
Chapter 4: Diagnostics............................................................................. 95
4.1 Flash Utility......................................................................................95
4.2 AMIBIOS Post Code (Aptio)............................................................96
Appendix: Fan and Temp Sensors........................................................103
Glossary................................................................................................... 107
Technical Support ..................................................................................113
http://www.tyan.com
4
Before you begin…
Check the box contents!
The retail motherboard package should contain the following:
1 x S7052 Motherboard
6 x SATA Cable
1 x COM Port Bracket Cable
1 x USB dual-port Bracket Cable
1 x IO shielding
1 x S7052 User’s manual
1 x S7052 Quick reference guide
1 x TYAN
®
Driver CD
IMPORTANT NOTE:
Sales sample may not come with the accessory listed above.
Please contact your sales representative to help order accessory for your
evaluation.
http://www.tyan.com
5
Chapter 1: Instruction
1.1 Congratulations
You have purchased the powerful TYAN
®
S7052 motherboard, based on the
Intel
®
Patsburg chipset. The S7052 is designed to support dual Intel
®
Xeon E5-
2600 Series processors, and up to 512GB RDIMM, 128GB UDIMM and 768GB
LRDIMM DDR3 memory. Leveraging advanced technology from Intel
®
, the
S7052 is capable of offering scalable 32 and 64-bit computing, high-bandwidth
memory design, and lightning-fast PCI-E bus implementation.
The S7052 not only empowers you in today’s demanding IT environment but also
offers a smooth path for future application upgradeability. All of these rich feature
sets provides the S7052 with the power and flexibility to meet demanding
requirements for today’s IT environments.
Remember to visit the TYAN
®
website at http://www.tyan.com. There you can
find all the information on all TYAN
®
products as well as all the supporting
documentation, FAQs, Drivers and BIOS upgrades.
1.2 Hardware Specifications
TYAN S7052 (S7052GM3NR)
Supported CPU
Series
Intel Xeon Processor E5-2600 Series
Socket Type / Q'ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 135W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel Patsburg C600 series
Supported DIMM
Qty
(12)+(12) DIMM slots
DIMM Type / Speed
DDR3/DDR3L 800/1066/1333/1600*
RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &
UDIMMs, LRDIMMs
Capacity
Up to 512GB RDIMM/128GB UDIMM/768GB
LRDIMM
Memory channel
4 Channels per CPU / Support 3 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
http://www.tyan.com
6
Expansion Slots PCI-E (1) PCI-E Gen.3 x4 slot / (3) PCI-E Gen.3 x8 slots
Recommended
Barebone /
Chassis
Mechanical
Compliant
KGN70 chassis kit
Port Q'ty (3)
LAN
Controller Intel 82574L / Intel I350AM2
Connector (10) SATA; (2) 6G + (8) 3G
Controller Intel Patsburg
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,
(4) 3.0 Gb/s (mini-SAS)
Storage SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) port (rear)
VGA (1) D-Sub 15-pin VGA port
RJ-45 (3) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (6) SATA-III and (4) SATA-II connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interfaces
Brand / ROM size 8MB / AMI
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/PXE boot / ACPI 2.0 power management /Power
on mode after power recovery / User-configurable
H/W monitoring / Auto-configurable of hard disk
types
Form Factor SSI EEB
Physical
Dimension
Board Dimension 12"x13" (305x330mm)
http://www.tyan.com
7
Operating System OS supported list
Please visit the Tyan’s Web site for the latest
update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7052 Motherboard
Manual
(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.
Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
SATA (6) SATA signal cables
USB (1) 2-port USB bracket cable
Package Contains
Cable
COM (1) COM port cable
TYAN S7052 (S7052GM5NR)
Supported CPU
Series
Intel Xeon Processor E5-2600 Series
Socket Type / Q'ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 135W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH Intel Patsburg C600 series
Supported DIMM
Qty
(12)+(12) DIMM slots
DIMM Type / Speed
DDR3/DDR3L 800/1066/1333/1600*
RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &
UDIMMs, LRDIMMs
Capacity
Up to 512GB RDIMM/128GB UDIMM/768GB
LRDIMM
Memory channel
4 Channels per CPU / Support 3 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
Expansion Slots PCI-E (1) PCI-E Gen.3 x4 slot / (3) PCI-E Gen.3 x8 slots
Recommended
Barebone /
Chassis
Mechanical
Compliant
KGN70 chassis kit
http://www.tyan.com
8
Port Q'ty (5)
LAN
Controller Intel 82574L / Intel I350AM4
Connector (10) SATA; (2) 6G + (8) 3G
Controller Intel Patsburg
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,
(4) 3.0 Gb/s (mini-SAS)
Storage SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) port (rear)
VGA (1) D-Sub 15-pin VGA port
RJ-45 (5) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (6) SATA-III and (4) SATA-II connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
Fan Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
Server
Management
AST2300 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interfaces
Brand / ROM size 8MB / AMI
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/PXE boot / ACPI 2.0 power management /Power
on mode after power recovery / User-configurable
H/W monitoring / Auto-configurable of hard disk
types
Form Factor SSI EEB
Physical
Dimension
Board Dimension 12"x13" (305x330mm)
Operating System OS supported list
Please visit the Tyan’s Web site for the latest
update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
http://www.tyan.com
9
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7052 Motherboard
Manual
(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.
Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
SATA (6) SATA signal cables
USB (1) 2-port USB bracket cable
Package Contains
Cable
COM (1) COM port cable
TYAN S7052 (S7052WGM3NR)
Supported CPU
Series
Intel Xeon Processor E5-2600 Series
Socket Type / Q'ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 135W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH
Intel Patsburg C600 series / Upgrade ROM module
onboard
Supported DIMM
Qty
(12)+(12) DIMM slots
DIMM Type / Speed
DDR3/DDR3L 800/1066/1333/1600*
RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &
UDIMMs, LRDIMMs
Capacity
Up to 512GB RDIMM/128GB UDIMM/768GB
LRDIMM
Memory channel
3 Channels per CPU / Support 3 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
Expansion Slots PCI-E (1) PCI-E Gen. 3 x4 slot / (3) PCI-E Gen.3 x8 slots
Recommended
Barebone /
Chassis
Mechanical
Compliant
KGN70 chassis kit
Port Q'ty (3)
LAN
Controller Intel 82574L / Intel I350AM2
http://www.tyan.com
10
Connector (2) Mini-SAS connectors (totally support 8 ports)
Controller Intel Patsburg
Speed 3.0 Gb/s
SAS
RAID RAID 0/1/10
Connector (6) SATA + (2) mini-SAS
Controller Intel Patsburg
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,
(8) 3.0 Gb/s (4-in-1 mini-SAS connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (3) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (4) SATA-II and (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
Fan Total (5) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
AST2300 iKVM
Feature
24-bit high quality video compression / Dual 10/100
Mb/s MAC interfaces
Server
Management
AST2050 IPMI
Feature
Supports storage over IP and remote platform-flash
Brand / ROM size 8MB / AMI
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/PXE boot / ACPI 2.0 power management /Power
on mode after power recovery / User-configurable
H/W monitoring / Auto-configurable of hard disk
types
http://www.tyan.com
11
Form Factor SSI EEB
Physical
Dimension
Board Dimension 12"x13" (305x330mm)
Operating System OS supported list
Please visit the Tyan’s Web site for the latest
update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7052 Motherboard
Manual
(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.
Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
SATA (6) SATA signal cables
USB (1) 2-port USB bracket cable
Package Contains
Cable
COM (1) COM port cable
TYAN S7052 (S7052WGM5NR)
Supported CPU
Series
Intel Xeon Processor E5-2600 Series
Socket Type / Q'ty LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 135W
Processor
System Bus
Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset PCH
Intel Patsburg C600 series / Upgrade ROM module
onboard
Supported DIMM
Qty
(12)+(12) DIMM slots
DIMM Type / Speed
DDR3/DDR3L 800/1066/1333/1600*
RDIMM/UDIMM / DDR3 & DDR3L, RDIMMs &
UDIMMs, LRDIMMs
Capacity
Up to 512GB RDIMM/128GB UDIMM/768GB
LRDIMM
Memory channel
3 Channels per CPU / Support 3 R/LR-DIMMs or 2
UDIMMs per channel
Memory
Memory voltage 1.5V or 1.35V
http://www.tyan.com
12
Expansion Slots PCI-E (1) PCI-E Gen.3 x4 slot / (3) PCI-E Gen.3 x8 slots
Recommended
Barebone /
Chassis
Mechanical
Compliant
KGN70 chassis kit
Port Q'ty (5)
LAN
Controller Intel 82574L / Intel I350AM4
Connector (2) Mini-SAS connectors (totally support 8 ports)
Controller Intel Patsburg
Speed 3.0 Gb/s
SAS
RAID RAID 0/1/10
Connector (6) SATA + (2) mini-SAS
Controller Intel Patsburg
Speed
(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color) ,
(8) 3.0 Gb/s (4-in-1 mini-SAS connector)
Storage
SATA
RAID RAID 0/1/10/5 (Intel RST)
Connector type D-Sub 15-pin
Resolution Up to 1920x1200
Graphic
Chipset Aspeed AST2300
USB
(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A
onboard)
COM (1) port (rear)
SAS (2) Mini-SAS (4-in-1) connectors
VGA (1) D-Sub 15-pin VGA port
RJ-45 (5) GbE ports
Power
SSI 24-pin + 8-pin + 8-pin power connectors / SSI
EEB spec. 2008
Front Panel (1) 2x12-pin SSI front panel header
Input /Output
SATA (4) SATA-II and (2) SATA-III connectors
Chipset Nuvoton 83773G
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
Fan Total (5) 4-pin headers
Temperature
Monitors temperature for CPU & system
environment
System
Monitoring
Others Watchdog timer support
Onboard Chipset Onboard Aspeed AST2300
AST2300 IPMI
Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / Supports storage over IP and
remote platform-flash / USB 2.0 virtual hub
AST2300 iKVM
Feature
24-bit high quality video compression / Dual 10/100
Mb/s MAC interfaces
Server
Management
AST2050 IPMI
Feature
Supports storage over IP and remote platform-flash
http://www.tyan.com
13
Brand / ROM size 8MB / AMI
BIOS
Feature
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3
/PXE boot / ACPI 2.0 power management /Power
on mode after power recovery / User-configurable
H/W monitoring / Auto-configurable of hard disk
types
Form Factor SSI EEB
Physical
Dimension
Board Dimension 12"x13" (305x330mm)
Operating System OS supported list
Please visit the Tyan’s Web site for the latest
update.
FCC (DoC) Class A
Regulation
CE (DoC) Yes
Operating Temp. 10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
Operating
Environment
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Motherboard (1) S7052 Motherboard
Manual
(1) Quick Ref. Guide / (1) I/O Shield Quick Ref.
Guide
Installation CD (1) TYAN installation CD
I/O Shield (1) I/O Shield
SATA (6) SATA signal cables
USB (1) 2-port USB bracket cable
Package Contains
Cable
COM (1) COM port cable
1.3 Software Specifications
For the latest OS (operation system) support and IPMI Configuration Guide, please
visit the Tyan’s Web site for information.
http://www.tyan.com
14
NOTE
http://www.tyan.com
15
Chapter 2: Board Installation
You are now ready to install your motherboard.
How to install our products right… the first time
The first thing you should do is reading this user’s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, MiTAC recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antistatic
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
Caution!
1. To avoid damaging the motherboard and associated
components, do not use torque force greater than
7kgf/cm (6.09 lb/in) on each mounting screw for
motherboard installation.
2. Do not apply power to the board if it has been
damaged.
http://www.tyan.com
16
2.1 Board Image
S7052
This picture is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above picture.
http://www.tyan.com
17
2.2 Block Diagram
S7052 Block Diagram
http://www.tyan.com
18
2.3 Board Parts, Jumpers and Connectors
This diagram is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above diagram. But
for the DIMM number please refer to the above placement for memory installation.
For the latest board revision, please visit our web site at http://www.tyan.com
.
http://www.tyan.com
19
Jumpers & Connectors
Jumper/Connector Function
J2 (PWRCONN4) SSI 8-pin CPU1 Power Connector
J3/J4/J6/J71/J75/J76/J77 4-pin Fan Connector
J5/LED1 ID LED and Button
J10 IPMB Connector
J22 Front Panel Connector
J24/J25/J33 LAN3/LAN4/LAN5 LED Header
J27 (USB7) Vertical (Type A) USB Connector
J30 (COM2) COM2 Header
J34 Reserved for BB Fan Board
J42 Port 80 Header
J43 Clear CMOS Jumper
J51 SATA/SAS Connector
J52 Mini SAS Connector
J53 ATX 24-pin Power Connector
J54 Patsburg Upgrade ROM Module Header
J55 Chassis Intrusion Header
J57/J58 USB Front Panel Header (blue)
J59 SAS SMBus Pin Header
J63 PSMI Connector
J64 (PWRCONN3) SSI 8-pin CPU0 Power Connector
J70 SATA SGPIO Pin Header
J78 BIOS Overwrite Jumper
J79 ME Firmware Update Header
J80 SAS Software RAID Key Header
SATA0/SATA1 SATA3 Connector
SATA2/SATA3/SATA4/SATA5 SATA2 Connector
Jumper Legend
OPEN - Jumper OFF
Without jumper cover
CLOSED - Jumper ON
With jumper cover
http://www.tyan.com
20
J3
J22
J77
J76
J75
J71
J42
J4
J6
J30
/