Sytech SYBIOFITRS Owner's manual

Brand: Sytech

Model: SYBIOFITRS

Category: Activity trackers

Type: Owner's manual

This manual is also suitable for

Welcome to Sytech! Thank you for purchasing the Fitness

Watch SY-BIOFIT. Please read this manual carefully before

operating your product and pay close attention to the

precautions which are mentioned below. Store this user

manual in a safe place for future reference.

• Bluetooth Wireless Activity Tracker

• Wrist Band

• USB charger

• Instruction Manual

• Bluetooth

BLE 4.0 (Low Energy)

• Time & Date function

• Digitally Track steps, calories burned, distance traveled, activity

time, daily Goal

• Track sleep quality

• Incoming call reminder

Android: Caller ID functions and vibration functions

iOS: Vibration function only.

• Vibration Alarm

• Sync Wirelessly via Bluetooth

to your phone

• View your data on screen to monitor your progress & set goals

• App supported by iOS and Play Store

• Internal Li-Polymer battery, 55mAa capacity.

Important:

To be able to use your Biofit watch, you will need to make sure

that your smartphone has the following specifications:

- Android: Smartphone with Bluetooth 4.0 Low Energy (BLE)

- IOS: From Iphone4S or above with iOS7 / iOS8

- ANDROID Version 4.3 or above

To find out if your smartphone is compatible with Bluetooth

BLE version, you can check the technical specifications of

your smartphone or install a BLE checker APP which can be

downloaded from the Play store.

Please keep into account that the functions of the Biofit

application can vary according to the chipset of your

smartphone. Some chipsets like Mediatek or Nvidia may not

be compatible with the application. Some functions may not

work correctly.

• Remove the device from the box.

• Remove all protection and extra packaging from the product.

• Please retain all packaging until you have checked and counted

all the parts and retain all packaging for warranty issues.

Welcome Care and maintenance

Package Contents

Key Features

Instructions before using

Read the following recommendations before using the Activity

Tracker. Following these you will be able to enjoy the product

for many years.

• The Biofit watch is water resistant. Do not use it while swimming.

• Do not expose the unit to liquid, moisture or humidity to avoid

the products internal circuit being affected.

• Don’t use abrasive cleaning solvents to clean the unit.

• Do not expose the unit to extremely high or low temperature

as this will shorten the life of electronic devices, destroy the

battery or distort certain plastic parts.

• Don’t dispose of the unit in fire as it will result in an explosion.

• Don’t expose the unit to contact with sharp objects as this will

cause scratches and damage.

• Don’t let the unit fall down onto the floor. The internal circuit

might get damaged.

• Don’t attempt to disassemble the unit as it may get damaged

if you are not professional.

How to wear activity tracker?

Follow the diagram below on how to wear your wristband

Charging the device

The battery icon on the screen display indicates the battery life.

When you notice battery power is low, you need to charge your

device. It takes about 2-3 hours to fully recharge the device.

To charge the device, plug the Activity Tracker into a USB

source (E.g.: Computer USB port) using the USB Charger

(Included). The indicator will show the charge level.

Note: Even if the Tracker is not in use, please charge the battery

at least once a month to prolong the battery life.

Activating the device

To save battery life, your Activity Tracker arrives to you in

hibernation mode. Before first use, Please charge the device

with the USB charger to activate the device. The logo will

appear on the display and the unit will enter into charging

mode.

Note: Your device may not arrive fully charged. You’re

recommended to charge your device fully before its first use.

Step 1: Open the App and you would see the welcome screen

Step 2: Settings

To connect the device to the mobile app, please go to Settings

page by clicking on the settings icon which is located on the

top right of the app.

Installing the Biofit Application

Install the Biofit APP on your Smartphone with iOS or Android OS

In order to use your activity tracker and enjoy all its benefits,

you will need to use a smartphone fully compatible with

Bluetooth BLE standards (Low Energy).

To download the application for Android, access to Google

store and download the App “Biofit”.

For the iOS version, please scan the QR code below.

Note: If you wish to use the APP in English, please contact

Sytech.

APP Operation

Mobile device requirements:

You can setup and sync your Activity Tracker using mobile

devices that support Bluetooth 4.0 BLE technology.

Supported iOS Devices - iOS 7.0 and above

Supported Android Devices - Version 4.3 and above

Note: Please ensure that your Android OS is version 4.3 or

above and iOS Version is 7.0 or above and the device has

Bluetooth 4.0, if not this application will not be compatible.

Unlike most Bluetooth accessories like headsets or speakers,

your Activity Tracker must be paired directly through the

BIOFIT app, and not through the “settings” icon on your mobile

device. Activity Tracker is always on Bluetooth pairing mode

by default. To pair and set up your device for the first time,

follow the following step

(IOS APP. QR CODE)

4) Set your basic information

Key-in the details including height, weight, stride length, age

and gender in the boxes and click the save button on the top

right of the settings page.

5) Set your daily goal

Please key-in a number into the box, and click Set Daily Goal.

Step 3: Pairing & Setting up personal information

Click on the “Pairing” icon in order to search for the Bluetooth

devices in range.

1) Connection established

Once the device is connected successfully a message that

says “Binding succeed” will appear. At this moment click OK

and the Bluetooth icon will be shown on the device.

2) 12/ 24 icon

You may choose to view the time in 12h or 24h format.

3) Reset button

This is to reset the device. Click on this button and all the

history data in the device will be cleared out. Do not press on

this button if the unit has any issues, this button will eliminate

all sorts of data recorded on the device so please be careful

when using it.

(1) Setting Button

The button on the top right is the setting button which is for

connecting device and setting all information before the first

use.

(2) Daily Target

It is based on your Daily Goal and this shows the percentage

of how much you have achieved of the goal set.

(3) Real- Time data

The data under the Daily Target percentage is the Real-Time

data from device:

1. Steps

2. Calories burned

3. Activity Distance

4. Activity time

(4)Start button

Please note the data in the list is shown after the device is

connected to Bluetooth and when the button “start” has been

pressed. Once this has been done, the data will update in real

time.

(5) Link Button

Before connecting the device, this button will read “Link”, once

you have connected the unit via Bluetooth it will change to

“Disconnect”. If you press disconnect, the device will be

disconnected from the application.

After Pairing the device from the Settings page, the device can

be re-connected by clicking the “Link” button if it has been

disconnected.

(6) SYNC Button

This is to transfer all the data collected from the device onto

the app. Click the Sync button to begin syncing the data. A

30-day history data will be updated in the next three pages

after it has uploaded successfully.

Note:

(1) It will take a few minutes to update all data to the app.

(2) The data will be updated day by day.

(3) The data on the device and the app may vary moderately as

the data synced gets refreshed every 15 minutes. After 15

minutes the data will be precise.

(4) Please don’t disconnect the Bluetooth while data is

Synchronizing.

6) Set the device name and time

(1) Setting device name

This is an optional choice. You may set the name of the device

to anything you wish.

When you click OK, the device Bluetooth will be disconnected

and the device will restart.

Please search device again from the pairing button again, you

will now see the device under the new name which you have

stored it as. Please select the device and pair it once again.

(2) Set the device time

The device will be set in a different time zone when you first use it.

It is important to set the device time so that the device and

smartphone display the same time. Please click on the Set

Device Time button so that the times on both devices are coordinated.

Step 4: Data sync to application

Go back to the Home page once the device setting is finished.

1) Daily Goal

The Goal is based on Daily walking steps/ Daily Steps goal.

2) Activity daily data and sleep daily data

Everyday data is based on device data saved: Activity time, total

steps, total calories burned, total activity distance, total sleep

hours.

History progress

This page shows your history progress daily/monthly/yearly. The

progress will help you analyze the activity situation.

1)Week/ Month/Year - To check the data by week, by month or

by year.

2)Activity time, total steps, total calories burned, total activity

distance, total sleep hours per week/ per month/ per year

3)The arrows are to view the data by date by week, month and

year.

4) The progress is shown in the diagram.

We can check steps, activity time, distance, calories burned,

sleep hours and daily goal separately by week, month and year

and make comparison.

Step5: Data analysis:

Sleep quality

(1) The sleep quality data is updated on this page, you can check

all the past hours slept.

(2) The data is sorted in a calendar to help you check everyday data.

(3) The 0.0h/0.0h is the proportion between the Good sleep

hours/ Total sleep hours.

(4) The colorful bar diagram is the quality of your sleep. The

higher the bar, the worse the sleep quality. You can check

when you start and when your wake up from the bar diagram.

ce setting is finished.

Activity data

- Alarm will be set to every day by default.

- Click the clock and set the alarm time.

- Move back to the clock list; turn the alarm on by setting the button

to the right.

- Now it will say alarm is set successfully. When the alarm goes

off, the device will vibrate.

Activity Alarm

Step6: Call reminder and Alarm setting

Call reminder

After the device is connected, turn on this function by setting

the button to the right. Please make sure the device is

connected to the app.

Whenever you receive a call, the name or number will show on

the screen of the device and will vibrate to remind you there is

an incoming call. For iOS – the device will ONLY vibrate.

NOTE: This option will not be available in the iOS APP,

only the “Call Reminder” option will be shown instead.

SMS reminder

This function only works for ANDROID devices. Follow the

same steps as mentioned in “Call reminder”. Whenever there

is an incoming message, an envelope icon will show up on the

screen of the device.

The activity alarm is set to remind you to do exercise at intervals.

- In the box of Start time and End time, please Key-in the clock

time, e.g. Start time 8:00, End time 18:00.

- In the box of interval time, please set the time, e.g.: 30 minutes.

- Then turn the button to the right, a message will appear showing

that the activity alarm is set successfully.

Clock Alarm

When you wake up, you need to exit the Sleep mode.

In the sleep mode, long press the screen for 2 seconds till the

icon of a person shows, then short touch the screen to enter back

into the activity mode.

If no operation is done within 2 seconds, the device stays at the

sleep mode.

Wake up alarm (Default is all alarm off). A total five alarms can

be set on the app and you can set from Monday to Sunday. It

will wake you up with a slight vibration.

Specification

Size: Main body: 47*25*11.5mm

Wristband: 216*18mm

Weight: 50g

Battery: rechargeable lithium polymer battery: 55mAh

Display: 0.91’’ OLED

Data Memory: 30 days

Walking distance: Max 999.99km

Calories burned: Max 9999.9kcal

Activity time: 99h59min

Charging time: 2.5 hours

Working time with LCD display ON: 7 hours

Standby time: 3 months

Declaration of Conformity

Manufacturer Name: Satyatrade S. L.

Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.

Camarma de Esteruelas, 28816 Madrid

Tel: 902 430 967

Fax: 91 8864285

NIF: B83254763

Manufacturing country: China

Description: Fitness Watch

Sytech

SY-BIOFIT complies with the following directives:

CE (EC & R&TTE) Standard: Directive 1999/05/CE

ROHS Standard: 2011/65/EU Restriction of Hazardous

Substances

Signed: Ajeet Nebhwani Utamchandani

Sole Administrator

Display on your Activity Tracker

To scroll through the screens, simply press the touch area (the

left of display)

- To conserve battery life, the display turns off when the device

is not in use for 10 seconds.

- To activate the screen, press the touch area.

TIME / DATE / BATTERY STEPS

CALORIES BURNED DISTANCE

% OF GOAL ACHIEVEDACTIVITY TIME

Sleep Measurement

For measuring your sleep quality, enter into the sleep mode on

the device in the following way:

In the activity mode, press and hold the touch area for 2 seconds till

the sleep mark shows. Then tap the screen to enter the sleep mode.

If no operation is done within 2 seconds, the device stays in the

activity mode.

When you sync your Activity Tracker, your activity data is uploaded

to your mobile device. Your Activity Tracker holds data for up to 30 days.

Your recorded data consists of steps taken, distance traveled,

calories burned and sleep data. Sync your Activity Tracker regularly

to have the maximum data on your mobile device.

Memory

Sytech SYBIOFITRS Owner's manual

Brand: Sytech

Model: SYBIOFITRS

Category: Activity trackers

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Sytech SYBIOFITRS Owner's manual

This manual is also suitable for

Sytech SYBIOFITRS Owner's manual

Other documents