Welcome to Sytech! Thank you for purchasing the Fitness
Watch SY-BIOFIT. Please read this manual carefully before
operating your product and pay close attention to the
precautions which are mentioned below. Store this user
manual in a safe place for future reference.
• Bluetooth Wireless Activity Tracker
• Wrist Band
• USB charger
• Instruction Manual
• Bluetooth
®
BLE 4.0 (Low Energy)
• Time & Date function
• Digitally Track steps, calories burned, distance traveled, activity
time, daily Goal
• Track sleep quality
• Incoming call reminder
Android: Caller ID functions and vibration functions
iOS: Vibration function only.
• Vibration Alarm
• Sync Wirelessly via Bluetooth
®
to your phone
• View your data on screen to monitor your progress & set goals
• App supported by iOS and Play Store
• Internal Li-Polymer battery, 55mAa capacity.
Important:
To be able to use your Biofit watch, you will need to make sure
that your smartphone has the following specifications:
- Android: Smartphone with Bluetooth 4.0 Low Energy (BLE)
- IOS: From Iphone4S or above with iOS7 / iOS8
- ANDROID Version 4.3 or above
To find out if your smartphone is compatible with Bluetooth
BLE version, you can check the technical specifications of
your smartphone or install a BLE checker APP which can be
downloaded from the Play store.
Please keep into account that the functions of the Biofit
application can vary according to the chipset of your
smartphone. Some chipsets like Mediatek or Nvidia may not
be compatible with the application. Some functions may not
work correctly.
• Remove the device from the box.
• Remove all protection and extra packaging from the product.
• Please retain all packaging until you have checked and counted
all the parts and retain all packaging for warranty issues.
1
2
Welcome Care and maintenance
Package Contents
Key Features
Instructions before using
Read the following recommendations before using the Activity
Tracker. Following these you will be able to enjoy the product
for many years.
• The Biofit watch is water resistant. Do not use it while swimming.
• Do not expose the unit to liquid, moisture or humidity to avoid
the products internal circuit being affected.
• Don’t use abrasive cleaning solvents to clean the unit.
• Do not expose the unit to extremely high or low temperature
as this will shorten the life of electronic devices, destroy the
battery or distort certain plastic parts.
• Don’t dispose of the unit in fire as it will result in an explosion.
• Don’t expose the unit to contact with sharp objects as this will
cause scratches and damage.
• Don’t let the unit fall down onto the floor. The internal circuit
might get damaged.
• Don’t attempt to disassemble the unit as it may get damaged
if you are not professional.
How to wear activity tracker?
Follow the diagram below on how to wear your wristband
Charging the device
The battery icon on the screen display indicates the battery life.
When you notice battery power is low, you need to charge your
device. It takes about 2-3 hours to fully recharge the device.
To charge the device, plug the Activity Tracker into a USB
source (E.g.: Computer USB port) using the USB Charger
(Included). The indicator will show the charge level.
Note: Even if the Tracker is not in use, please charge the battery
at least once a month to prolong the battery life.
Activating the device
To save battery life, your Activity Tracker arrives to you in
hibernation mode. Before first use, Please charge the device
with the USB charger to activate the device. The logo will
appear on the display and the unit will enter into charging
mode.
Note: Your device may not arrive fully charged. You’re
recommended to charge your device fully before its first use.
3
4
Step 1: Open the App and you would see the welcome screen
Step 2: Settings
To connect the device to the mobile app, please go to Settings
page by clicking on the settings icon which is located on the
top right of the app.
Installing the Biofit Application
Install the Biofit APP on your Smartphone with iOS or Android OS
In order to use your activity tracker and enjoy all its benefits,
you will need to use a smartphone fully compatible with
Bluetooth BLE standards (Low Energy).
To download the application for Android, access to Google
store and download the App “Biofit”.
For the iOS version, please scan the QR code below.
Note: If you wish to use the APP in English, please contact
Sytech.
APP Operation
Mobile device requirements:
You can setup and sync your Activity Tracker using mobile
devices that support Bluetooth 4.0 BLE technology.
Supported iOS Devices - iOS 7.0 and above
Supported Android Devices - Version 4.3 and above
Note: Please ensure that your Android OS is version 4.3 or
above and iOS Version is 7.0 or above and the device has
Bluetooth 4.0, if not this application will not be compatible.
Unlike most Bluetooth accessories like headsets or speakers,
your Activity Tracker must be paired directly through the
BIOFIT app, and not through the “settings” icon on your mobile
device. Activity Tracker is always on Bluetooth pairing mode
by default. To pair and set up your device for the first time,
follow the following step
(IOS APP. QR CODE)
5
6
4) Set your basic information
Key-in the details including height, weight, stride length, age
and gender in the boxes and click the save button on the top
right of the settings page.
5) Set your daily goal
Please key-in a number into the box, and click Set Daily Goal.
Step 3: Pairing & Setting up personal information
Click on the “Pairing” icon in order to search for the Bluetooth
devices in range.
1) Connection established
Once the device is connected successfully a message that
says “Binding succeed” will appear. At this moment click OK
and the Bluetooth icon will be shown on the device.
2) 12/ 24 icon
You may choose to view the time in 12h or 24h format.
3) Reset button
This is to reset the device. Click on this button and all the
history data in the device will be cleared out. Do not press on
this button if the unit has any issues, this button will eliminate
all sorts of data recorded on the device so please be careful
when using it.
7
8
(1) Setting Button
The button on the top right is the setting button which is for
connecting device and setting all information before the first
use.
(2) Daily Target
It is based on your Daily Goal and this shows the percentage
of how much you have achieved of the goal set.
(3) Real- Time data
The data under the Daily Target percentage is the Real-Time
data from device:
1. Steps
2. Calories burned
3. Activity Distance
4. Activity time
(4)Start button
Please note the data in the list is shown after the device is
connected to Bluetooth and when the button “start” has been
pressed. Once this has been done, the data will update in real
time.
(5) Link Button
Before connecting the device, this button will read “Link”, once
you have connected the unit via Bluetooth it will change to
“Disconnect”. If you press disconnect, the device will be
disconnected from the application.
After Pairing the device from the Settings page, the device can
be re-connected by clicking the “Link” button if it has been
disconnected.
(6) SYNC Button
This is to transfer all the data collected from the device onto
the app. Click the Sync button to begin syncing the data. A
30-day history data will be updated in the next three pages
after it has uploaded successfully.
Note:
(1) It will take a few minutes to update all data to the app.
(2) The data will be updated day by day.
(3) The data on the device and the app may vary moderately as
the data synced gets refreshed every 15 minutes. After 15
minutes the data will be precise.
(4) Please don’t disconnect the Bluetooth while data is
Synchronizing.
6) Set the device name and time
(1) Setting device name
This is an optional choice. You may set the name of the device
to anything you wish.
When you click OK, the device Bluetooth will be disconnected
and the device will restart.
Please search device again from the pairing button again, you
will now see the device under the new name which you have
stored it as. Please select the device and pair it once again.
(2) Set the device time
The device will be set in a different time zone when you first use it.
It is important to set the device time so that the device and
smartphone display the same time. Please click on the Set
Device Time button so that the times on both devices are coordinated.
Step 4: Data sync to application
Go back to the Home page once the device setting is finished.
9
10
1) Daily Goal
The Goal is based on Daily walking steps/ Daily Steps goal.
2) Activity daily data and sleep daily data
Everyday data is based on device data saved: Activity time, total
steps, total calories burned, total activity distance, total sleep
hours.
History progress
This page shows your history progress daily/monthly/yearly. The
progress will help you analyze the activity situation.
1)Week/ Month/Year - To check the data by week, by month or
by year.
2)Activity time, total steps, total calories burned, total activity
distance, total sleep hours per week/ per month/ per year
3)The arrows are to view the data by date by week, month and
year.
4) The progress is shown in the diagram.
We can check steps, activity time, distance, calories burned,
sleep hours and daily goal separately by week, month and year
and make comparison.
Step5: Data analysis:
Sleep quality
(1) The sleep quality data is updated on this page, you can check
all the past hours slept.
(2) The data is sorted in a calendar to help you check everyday data.
(3) The 0.0h/0.0h is the proportion between the Good sleep
hours/ Total sleep hours.
(4) The colorful bar diagram is the quality of your sleep. The
higher the bar, the worse the sleep quality. You can check
when you start and when your wake up from the bar diagram.
ce setting is finished.
Activity data
11
12
- Alarm will be set to every day by default.
- Click the clock and set the alarm time.
- Move back to the clock list; turn the alarm on by setting the button
to the right.
- Now it will say alarm is set successfully. When the alarm goes
off, the device will vibrate.
Activity Alarm
Step6: Call reminder and Alarm setting
Call reminder
After the device is connected, turn on this function by setting
the button to the right. Please make sure the device is
connected to the app.
Whenever you receive a call, the name or number will show on
the screen of the device and will vibrate to remind you there is
an incoming call. For iOS – the device will ONLY vibrate.
NOTE: This option will not be available in the iOS APP,
only the “Call Reminder” option will be shown instead.
SMS reminder
This function only works for ANDROID devices. Follow the
same steps as mentioned in “Call reminder”. Whenever there
is an incoming message, an envelope icon will show up on the
screen of the device.
-
The activity alarm is set to remind you to do exercise at intervals.
- In the box of Start time and End time, please Key-in the clock
time, e.g. Start time 8:00, End time 18:00.
- In the box of interval time, please set the time, e.g.: 30 minutes.
- Then turn the button to the right, a message will appear showing
that the activity alarm is set successfully.
Clock Alarm
13
14
When you wake up, you need to exit the Sleep mode.
In the sleep mode, long press the screen for 2 seconds till the
icon of a person shows, then short touch the screen to enter back
into the activity mode.
If no operation is done within 2 seconds, the device stays at the
sleep mode.
Wake up alarm (Default is all alarm off). A total five alarms can
be set on the app and you can set from Monday to Sunday. It
will wake you up with a slight vibration.
Specification
Size: Main body: 47*25*11.5mm
Wristband: 216*18mm
Weight: 50g
Battery: rechargeable lithium polymer battery: 55mAh
Display: 0.91’’ OLED
Data Memory: 30 days
Walking distance: Max 999.99km
Calories burned: Max 9999.9kcal
Activity time: 99h59min
Charging time: 2.5 hours
Working time with LCD display ON: 7 hours
Standby time: 3 months
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Fitness Watch
Sytech
®
SY-BIOFIT complies with the following directives:
CE (EC & R&TTE) Standard: Directive 1999/05/CE
ROHS Standard: 2011/65/EU Restriction of Hazardous
Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
Display on your Activity Tracker
To scroll through the screens, simply press the touch area (the
left of display)
- To conserve battery life, the display turns off when the device
is not in use for 10 seconds.
- To activate the screen, press the touch area.
TIME / DATE / BATTERY STEPS
CALORIES BURNED DISTANCE
% OF GOAL ACHIEVEDACTIVITY TIME
Sleep Measurement
For measuring your sleep quality, enter into the sleep mode on
the device in the following way:
In the activity mode, press and hold the touch area for 2 seconds till
the sleep mark shows. Then tap the screen to enter the sleep mode.
If no operation is done within 2 seconds, the device stays in the
activity mode.
When you sync your Activity Tracker, your activity data is uploaded
to your mobile device. Your Activity Tracker holds data for up to 30 days.
Your recorded data consists of steps taken, distance traveled,
calories burned and sleep data. Sync your Activity Tracker regularly
to have the maximum data on your mobile device.
Memory
/
