Skov DA 100B-DA 150B Hot And Dry Update Kit Mounting Guide

Type
Mounting Guide
2017.03.27 • 604284
DA 100B/150B HD Update Kit
Mounting Guide
2 Mounting Guide
DA 100B/150B HD Update Kit
1 Product Description
The DA 100B/DA 150B Hot & Dry update kit is used when you want to update your existing DA 100B/DA
150B pad cooling system to a DA 100B/DA 150B Hot & Dry pad cooling system.
The update kit consists of following parts.
437673 DA 100B/150B HD update kit
Pos.
Number
Description
Number
Description
1
1
Check valve brass 2" sl/sl
1
PAD cooling throttle disk, 9 meter
2
1
PVC adhesive union 2", BOA
1
PAD cooling throttle disk, 12 meter
3
1
2" Nylon Washer 79x61x4 mm
1
PAD cooling throttle disk, 15 meter
4
1
2" EPDM sealing 59x83x4 mm
1
PAD cooling throttle disk, 18 meter
2 Mounting Guide
2.1 Check Valve
Mount the transition piece 2" for supply unit with
EPDM sealing on the supply unit.
Mounting Guide 3
DA 100B/150B HD Update Kit
Mount the nylon washer and the EPDM sealing.
Mount the 2” check valve brass on the transition
piece 2" for supply unit on the inside of the supply
unit tank.
Tighten the parts together.
Check that the float valve can is adjustable.
2.2 Water Distribution
1. Mount a 2” PVC adhesive union after the T-
fitting
2. Mount a throttle disc in the 2” PVC union. See
table below to choose the correct disc.
Connection of water should take place later so the system is not filled inadvertently.
Dimensions of throttle disc
Pad length
9 m
12 m
15 m
18 m
21 m
24 m
Hole diameter in throttle disc*
Ø13
Ø16
Ø19
Ø21
-
-
*The throttle discs are marked with hole diameter.
SKOV A/S • Hedelund 4 • Glyngøre • DK-7870 Roslev
Tel. +45 72 17 55 55 • Fax +45 72 17 59 59 • www.skov.com • E-mail: skov@skov.dk
2017.03.27 • 604284 6.03.04 • EN • Made in Denmark
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Skov DA 100B-DA 150B Hot And Dry Update Kit Mounting Guide

Type
Mounting Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI