2. aspenhome
  3. I215-9130

aspenhome I215-9130 Assembly Instructions

  • I've reviewed the assembly instructions for the aspenhome Chairside Table, model I215-9130. This document provides a clear guide on how to assemble the table, including a list of necessary tools, hardware, and components and the steps needed to put it all together. I'm ready to answer any questions you have about assembling this table.
  • What tools are required for assembly?
    What is included in the hardware list?
    What is the quantity of side assemblies provided?
Page 1/2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
HARDWARE LIST:
1 PC
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
16 PCS
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
Table Top Assembly
2
3 Side Assembly 2 PCS
1 PC
ITEM NO: I215-9130 Chairside Table
Shelf
FUNCTIONALITY INSTRUCTION
16 PCS
16 PCS
Leveler on bases
Adjust the leveler
when necessary
2 PCS
Bolt Ø1/4" x 2-3/16"
06-22-2020
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Table Top Assembly
ITEM NO: I215-9130 Chairside Table
STEP 3: Attach the shelves to the side assemblies by using 8 bolts (A), lock washers(B) and
flat washers(C). Use the Allen wrench provided to tighten all the bolts.
STEP 4: Put the drawer back to the original position. Turn the assembled table to the upright
position.
STEP 1: Put the table top assembly face down on a soft surface.
STEP 2: Take out the drawer, then attach the side assemblies to table top assembly by
using 8 bolts(A), lock washers(B) and flat washers(C). Do not completely tighten bolts.
Side Assembly
BC
A
D
BC
A
D
Shelf
Shelf
06-22-2020
/