aspenhome I597-9130 Assembly Instructions
- Type
- Assembly Instructions
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/2
ITEM NO: I597-9130 Chairside Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
04-13-2022
HARDWARE LIST:
1 PC
No.
A
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
Bolt Ø1/4" x 2-3/8" 12 PCS
COMPONENTS LIST:
No.
1
2
3
Description Sketch Quantity
1 PC
1 PC
12 PCS
12 PCS 4 PCS
FUNCTIONALITY INSTRUCTION
Adjust the leveler
when necessary
Leveler on Legs
Felt-lined Drawer
Table Top
Leg
Bottom Shelf
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
ITEM NO: I597-9130 Chairside Table
04-13-2022
STEP 1: Put the table top face down on a soft surface. Pull the drawer out and attach the
legs to the table top by using 8 bolts(A), lock washers(B) and flat washers(C). Do not
completely tighten bolts.
STEP 2: Attach the bottom shelf to the legs by using 4 bolts (A), lock washers(B) and flat
washers(C). Completely tighten all bolts. Push the drawer back. Turn the assembled table to
the upright position.
A
B
CD
A
B
CD
Leg
Bottom Shelf
Table Top
STEP 3: Reverse the handle by removing the screws while the drawer is open and attach the handle
to the front of the drawer with screws as shown below.
Handle
Screw
Handle
-
1
-
2
aspenhome I597-9130 Assembly Instructions
- Type
- Assembly Instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
aspenhome I597-451 Assembly Instructions
-
-
-
-
-
-
-
-
-