Signature Hardware 282802 Installation guide

1Double Hook Installation Instructions

DOUBLE HOOK

INSTRUCTIONS

TOOLS AND MATERIALS:

Unpack and inspect the product for any

shipping damages. If you ﬁnd damages, do

not install. Contact Customer Service at

1.866.855.2284. If you need assistance or

have questions while installing your double

hook contact Customer Service.

We recommend consulting a professional if

you are unfamiliar with installing hardware

ﬁxtures. Signature Hardware accepts no

liability for any damage to the wall or door, or

for personal injury during installation.

BEFORE INSTALLING INSTALLATION

1. Use a tape measure to determine the hook mounting

location.

2. Hold the hook in place and mark the positions of the

mounting holes with a pencil.

3. Drill mounting holes in the locations marked in the

previous step.

4. Hold the hook in position and insert the screws from

behind the door or wall. Tighten by hand, and then tighten

the screws with a screwdriver until the hook is secure.

Read entire double hook installation

instructions. Observe all local building and

safety codes. For the following installation

instructions it is assumed that any old

ﬁxtures have been removed and any repairs

to the door or wall have been completed.

Drill

Tape Measure

Safety Glasses

Pencil

Screwdriver