Signature Hardware SH349614 Installation guide

Signature Hardware

Brand: Signature Hardware

Model: SH349614

Type: Installation guide

This manual is also suitable for

349614

Signature Hardware SH349614 is a wall-mount kitchen sink that offers a stylish and functional upgrade to your kitchen. Its versatile design allows for easy installation on any wall, making it perfect for small spaces or creating a unique focal point in your kitchen. The sink is constructed from durable materials, ensuring longevity and resistance to everyday wear and tear. Enjoy the convenience of having a sink that saves valuable counter space while adding a touch of elegance to your kitchen.

Signature Hardware SH349614 is a wall-mount kitchen sink that offers a stylish and functional upgrade to your kitchen. Its versatile design allows for easy installation on any wall, making it perfect for small spaces or creating a unique focal point in your kitchen. The sink is constructed from durable materials, ensuring longevity and resistance to everyday wear and tear. Enjoy the convenience of having a sink that saves valuable counter space while adding a touch of elegance to your kitchen.

1

BEFORE YOU BEGIN

Read the entire installation instructions before

beginning. Observe all local building and safety codes.

For the following installation instructions for your new

sink it is assumed that any old ﬁxtures have been

removed and that the water supply lines and drain pipe

are in place.

Unpack and inspect the product for any shipping

damages. If you ﬁnd damages, do not install. Contact

Customer Service at 1-866-855-2284. If you need

assistance or have questions while installing your sink,

contact Customer Service.

Because wall construction and materials vary from

home to home, Signature Hardware does not provide

mounting hardware for all of our wall-mount sinks. The

appropriate mounting hardware can be purchased from

your local hardware store.

We recommend consulting a professional if you are

unfamiliar with installing kitchen ﬁxtures. Signature

Hardware accepts no liability for any damages to the

sink, ﬂoor, walls, plumbing or for personal injury during

installation.

WALL-MOUNT KITCHEN SINK

INSTALLATION INSTRUCTIONS

REVISED 02/13/2019

Drill

Hex Wrench

Cloth

Level

Phillips

Screwdriver

Pencil

Safety Glasses

Stud Finder

Tape Measure

Neutral Cure

Silicone Sealant

Wood Blocking

Anchor bolt

TOOLS AND MATERIALS:

2

INSTALLATION

2. Drill mounting holes for the anchor or lag bolts using

the guides created in step 1.

3. Secure the mounting brackets to the wall with the

anchor bolts. After inserting the ﬁrst fastener, double

check that the bracket is level. When the brackets are

properly aligned insert the remaining fasteners.

1. Use a tape measure to determine your desired

location. Place the mounting brackets in the installa-

tion location and ensure they are level. Then, mark the

location of the mounting holes on the wall.

WALL-MOUNT KITCHEN SINK

INSTALLATION INSTRUCTIONS

IMPORTANT: The sink should be anchored to cross

bracing between wall studs, which you can locate using

a stud ﬁnder. Wood blocking can be installed between

the studs using standard 2 x 4’s (for additional support,

we recommend stacking the 2x4s to ensure maximum

anchoring).

We recommend consulting a professional if you are

unfamiliar with this type of installation.

stud ﬁnder

wood

blocking

studs

3

6. Apply a thin bead of silicone around the back of the

sink, where it meets the wall. Then, wipe away any

excess sealant with a damp cloth. This will prevent

water from getting behind the sink, which could

damage drywall.

4. Before the sink is attached to the wall, install the

faucet and drain assembly according to the installation

instructions.

5. Attach the sink to the brackets with the mounting

hardware.

WALL-MOUNT KITCHEN SINK

INSTALLATION INSTRUCTIONS

6. To complete your installation, connect the water

supply and drain lines. Turn on the water supply to

check for any leaks from the water supply lines or sink

basin.

1
2
3

Signature Hardware SH349614 Installation guide

Signature Hardware

Brand: Signature Hardware

Model: SH349614

Type: Installation guide

This manual is also suitable for

349614

Signature Hardware SH349614 is a wall-mount kitchen sink that offers a stylish and functional upgrade to your kitchen. Its versatile design allows for easy installation on any wall, making it perfect for small spaces or creating a unique focal point in your kitchen. The sink is constructed from durable materials, ensuring longevity and resistance to everyday wear and tear. Enjoy the convenience of having a sink that saves valuable counter space while adding a touch of elegance to your kitchen.

Related papers

Other documents