Watco 940/941 Installation guide

  • Hello! I've reviewed the 940/941 Installation Instructions. This document explains how to install the 940/941 drain assembly, highlighting its built-in test membrane, tool-free overflow plate and multiple assembly layouts. The instructions also specify the correct thread compounds for ABS or PVC use, cautioning against linseed oil. I'm ready to answer any questions you have about this product.
  • What kind of putty should not be used?
    What material can be used for assembly?
    How many assembly layouts are possible?
6
7
8
9
10
11
13
12
16
15
14
940/941 Installation Instructions
941 Half Kits consist of parts 1-8 and 12-16.
940/941 Series Parts List
Above-Floor
Layout Direct Drain
Layout
This product can be assembled in three dierent ways:
Includes built-in
test membrane Easily remove
membrane after testing. After installation,
snap on overow plate. No screws
Standard
Layout
WATCO MANUFACTURING COMPANY
1220 South Powell Road
Independence, MO 64057-2724
Phone: 816-796-3900 • 800-821-8576
Fax: 816-796-0875 • 800-399-2826
www.watcomfg.com
940/941-INST Rev. 05/16
Item Part # Description
1. 01010CP ..Knob, Brass
2. 11584 .......Friction Ring (11504) and Post (11508)
3. 01013CP ..Stopper, Brass
4. 11507 ....... Seal, 11/16” dia.
5. 01022CP..Strainer Body, 1.625” - 16 - 1.25”, Metal
6. 10693 ......Drain Flange Gasket, Perfect Fit®
7. 11022 .......Drain Flange, Perfect Fit®, ABS
14022.......Drain Flange, Perfect Fit®, PVC
8. 11023 ....... Drain/Overow Elbow, Perfect Fit®, ABS
14023 .......Drain/Overow Elbow, Perfect Fit®, PVC
9. 11605 .......Pipe, Schedule 40, ABS, 1.5” x 4.625”
11606 .......Pipe, Schedule 40, PVC, 1.5” x 4.625”
10. 14011 .......Sanitary Tee, Schedule 40, ABS
14010 .......Sanitary Tee, Schedule 40, PVC
11. 11605 .......Pipe, Schedule 40, ABS, 1.5” x 11.75”
11606 .......Pipe, Schedule 40, PVC, 1.5” x 11.75”
12. 11020 ....... Innovator® Overow Ell, Schedule 40, ABS
14020 .......Innovator® Overow Ell, Schedule 40, PVC
13. 10675 .......Overow Ell Washer, Foam
14. 11121 .......ABS Retainer Star Nut for Innovator®
15. 01004CP .Overow Plate for Innovator®
16. 11575 ....... Test Plug with O-Ring-type Gasket
CAUTION: Do not use linseed oil
based putty products. Use only thread
compounds specically intended either
for ABS or PVC assembly.
940/941 Installation Instructions
6
7
8
9
10
11
13
12
16
15
14
941 Half Kits consist of parts 1-8 and 12-16.
Includes built-in
test membrane Easily remove
membrane after testing. After installation,
snap on overow plate. No screws
940/941 Series Features
Above-Floor
Layout Direct Drain
Layout
This product can be assembled in three dierent ways:
Standard
Layout
WATCO MANUFACTURING COMPANY
1220 South Powell Road
Independence, MO 64057-2724
Phone: 816-796-3900 • 800-821-8576
Fax: 816-796-0875 • 800-399-2826
www.watcomfg.com
WATCO
®
Always A Step Ahead
See below for optional installations possible.
940/941-INST Rev. 5/09
Item Part # Description
1. 01010CP .... Knob, Brass
2. 11510 .........Friction Ring (11505) and Post (11532)
3. 01013CP .... Stopper, Brass
4. 11507 .........Seal, 11/16” dia.
5. 01022CP ....Strainer Body, 1.625” - 16 - 1.25”, Metal
6. 10693 .........Drain Flange Gasket, Perfect Fit®
7. 11022 ......... Drain Flange, Perfect Fit®, ABS
14022 .........Drain Flange, Perfect Fit®, PVC
8. 11023 .........Drain/Overow Elbow, Perfect Fit®, ABS
14023 .........Drain/Overow Elbow, Perfect Fit®, PVC
9. 11605 ......... Pipe, Schedule 40, ABS, 1.5” x 4.625”
11606 ......... Pipe, Schedule 40, PVC, 1.5” x 4.625”
10. 14011 .........Sanitary Tee, Schedule 40, ABS
14010 ......... Sanitary Tee, Schedule 40, PVC
11. 11605 ......... Pipe, Schedule 40, ABS, 1.5” x 11.75”
11606 ......... Pipe, Schedule 40, PVC, 1.5” x 11.75”
12. 11020 .........Innovator® Overow Ell, Schedule 40, ABS
14020 .........Innovator® Overow Ell, Schedule 40, PVC
13. 10675 ......... Overow Ell Washer, Foam
14. 11121..........ABS Retainer Star Nut for Innovator®
15. 01004CP ....Overow Plate for Innovator®
16. 11575 .........Test Plug with O-Ring-type Gasket
/