Charlotte Pipe PVC 00304 1200 User guide

DIMENSIONAL CATALOG

DWV

DC-DWV

ConnecTite® Push-Fit DWV

Fittings

ABS-DWV Pipe and Fittings

PVC-DWV Pipe and Fittings

PVC Sewer Pipe

PVC Schedule 30 DWV Thin

Wall 3.25 in. O.D. Pipe and

Fittings

(Updated July 14, 2020)

Plastic DWV Pipe and Fitting Dimensions

All products manufactured by Charlotte Pipe and

Foundry Company are proudly made in the U.S.A.

This catalog accurately reﬂects dimensional information to the best

of our knowledge. If the dimensions on your job are critical, please

verify dimensional information with our factory.

This dimensional catalog accurately reﬂects our product line at the

time the catalog was printed. However, we add and delete items on

an ongoing basis to better serve our customers. Please refer to our

current list price sheets for an accurate listing of items offered.

Charlotte Pipe® products are manufactured to the applicable ASTM

standard. Charlotte Pipe and Foundry cannot accept responsibility

for the performance, dimensional accuracy, or compatibility of pipe,

ﬁttings, gaskets, or couplings not manufactured or sold by Charlotte

Pipe and Foundry.

Page

ABS “Foam Core” Schedule 40 DWV

Pipe Data ..................................................4

ABS Plus® “Foam Core” Schedule 40 DWV

Pipe Data ..................................................5

PVC “Foam Core” Schedule 40 DWV

Pipe Data ..................................................6

PVC Schedule 40 DWV Pipe Data ......................7

D 3034 PVC Sewer Pipe Data ............................8

PVC D 2729 Sewer and Drain Pipe Data ............. 9

ConnecTite® Push-Fit DWV Fittings .............10-11

PVC and ABS DWV Fittings Dimensions ......12-66

PVC Thin Wall Sch. 30 Pipe Data .....................67

PVC Thin Wall Sch. 30 Fittings

Dimensions .........................................68-74

Certiﬁcation ................................................75-76

Warranty .........................................................77

Table of Contents

Charlotte Pipe, ABS Plus and ConnecTite are registered trademarks of

Charlotte Pipe and Foundry Company.

Download our Tech Tools App for dimensional

info, tech calculators and more on your

mobile device.

4

ABS Foam Core Pipe

ABS Schedule 40 DWV Pipe

(For Non-Pressure Applications)

ABS 3112 1

1

⁄

2

” x 10’ 03132 2590 1.900 0.145 27.1

ABS 3112 1

1

⁄

2

” x 20’ 03133 5180 1.900 0.145 27.1

ABS 3200 2” x 10’ 03134 1670 2.375 0.154 37.7

ABS 3200 2” x 20’ 03135 3340 2.375 0.154 37.7

ABS 3300 3” x 10’ 03136 750 3.500 0.216 74.5

ABS 3300 3” x 20’ 03137 1500 3.500 0.216 74.5

ABS 3400 4” x 10’ 03138 480 4.500 0.237 107.1

ABS 3400 4” x 20’ 03139 960 4.500 0.237 107.1

ABS 3600 6” x 10’ 03140 200 6.625 0.280 187.8

ABS 3600 6” x 20’ 03141 400 6.625 0.280 187.8

Pipe Data

NOT FOR PRESSURE

Do not use PVC / ABS / ABS Plus® cellular core (foam core)

pipe for pressure applications. The use of cellular core pipe

in pressure applications may result in system failure and

property damage.

Testing with or use of compressed air or gas in PVC / ABS

/ CPVC pipe or fittings can result in explosive failures and

cause severe injury or death.

• NEVER test with or transport/store

compressed air or gas in PVC / ABS / CPVC

pipe or fittings.

• NEVER test PVC / ABS / CPVC pipe or

fittings with compressed air or gas, or air

over water boosters.

• ONLY use PVC / ABS / CPVC pipe or

fittings for water or approved chemicals.

• Refer to warnings on PPFA’s website and

ASTM D 1785.

NSF Listed. Meets All Requirements of ASTM F 628.

ABS SCHEDULE 40 FOAM CORE (BLACK) PLAIN END ASTM F 628

MIN. WT. PER

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT.

611942- SKID (FT.) (IN.) (IN.) (LBS.)

5

ABS Plus® Foam Core DWV Pipe

ABS Plus Schedule 40 DWV Pipe

(For Non-Pressure Applications)

APA 17112 1

1⁄2

” x 10’ 12495 2590 1.900 0.145 31.4

APA 17112 1

1⁄2

” x 20’ 12494 5180 1.900 0.145 31.4

APA 17200 2” x 10’ 12497 1670 2.375 0.154 41.9

APA 17200 2” x 20’ 12496 3340 2.375 0.154 41.9

APA 17300 3” x 10’ 12499 750 3.500 0.216 84.0

APA 17300 3” x 20’ 12498 1500 3.500 0.216 84.0

APA 17400 4” x 10’ 12501 480 4.500 0.237 118.80

APA 17400 4” x 20’ 12500 960 4.500 0.237 118.80

Pipe Data

NOT FOR PRESSURE

Do not use PVC / ABS / ABS Plus® cellular core (foam core)

pipe for pressure applications. The use of cellular core pipe

in pressure applications may result in system failure and

property damage.

Testing with or use of compressed air or gas in PVC / ABS

/ CPVC pipe or fittings can result in explosive failures and

cause severe injury or death.

• NEVER test with or transport/store

compressed air or gas in PVC / ABS / CPVC

pipe or fittings.

• NEVER test PVC / ABS / CPVC pipe or

fittings with compressed air or gas, or air

over water boosters.

• ONLY use PVC / ABS / CPVC pipe or

fittings for water or approved chemicals.

• Refer to warnings on PPFA’s website and

ASTM D 1785.

NSF Listed. Meets All Requirements of ASTM F 1488.

ABS PLUS SCHEDULE 40 FOAM CORE (BLACK) PLAIN END ASTM F 1488

MIN. WT. PER

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT.

611942- SKID (FT.) (IN.) (IN.) (LBS.)

ABS Plus is a registered trademark of Charlotte Pipe and Foundry Company.

A

B

S

-

D

W

V

P

I

P

E

6

PVC Foam Core Pipe

PVC Schedule 40 DWV Pipe

(For Non-Pressure Applications)

PVC SCHEDULE 40 FOAM CORE (WHITE) PLAIN END ASTM F 891

NOTE: When ordering, please specify plain end or

bell end.

PVC 4112 1

1

⁄

2

” x 10’ 04178 1650 1.900 0.145 32.3

PVC 4112 1

1

⁄

2

” x 20’ 04177 3300 1.900 0.145 32.3

PVC 4200 2” x 10’ 04174 1110 2.375 0.154 43.9

PVC 4200 2” x 20’ 04173 2220 2.375 0.154 43.9

PVC 4300 3” x 10’ 03934 1130 3.500 0.216 89.7

PVC 4300 3” x 20’ 03935 1000 3.500 0.216 89.7

PVC 4400 4” x 10’ 03936 670 4.500 0.237 123.8

PVC 4400 4” x 20’ 03937 1340 4.500 0.237 123.8

PVC 4600 6” x 10’ 03938 330 6.625 0.280 235.0

PVC 4600 6” x 20’ 03939 660 6.625 0.280 235.0

PVC 4800 8” x 20’ 03941 360 8.625 0.322 371.0

PVC 4910 10” x 20’ 03942 220 10.750 0.365 566.3

PVC 4912 12” x 20’ 03943 120 12.750 0.406 700.0

PVC 4300B

3” x 20’ 04782 1000 3.500 0.216 89.7

PVC 4400B

4” x 10’ 04783 670 4.500 0.237 123.8

PVC 4400B

4” x 20’ 04784 1340 4.500 0.237 123.8

PVC 4600B

6” x 10’ 09904 330 6.625 0.280 235.0

PVC 4600B

6” x 20’ 04786 660 6.625 0.280 235.0

PVC SCHEDULE 40 FOAM CORE (WHITE) BELL-END

Pipe Data

NSF Listed. Meets All Requirements of ASTM F 891.

NOT FOR PRESSURE

Do not use PVC / ABS / ABS Plus® cellular core (foam core)

pipe for pressure applications. The use of cellular core pipe

in pressure applications may result in system failure and

property damage.

Testing with or use of compressed air or gas in PVC / ABS

/ CPVC pipe or fittings can result in explosive failures and

cause severe injury or death.

• NEVER test with or transport/store

compressed air or gas in PVC / ABS / CPVC

pipe or fittings.

• NEVER test PVC / ABS / CPVC pipe or

fittings with compressed air or gas, or air

over water boosters.

• ONLY use PVC / ABS / CPVC pipe or

fittings for water or approved chemicals.

• Refer to warnings on PPFA’s website and

ASTM D 1785.

MIN. WT. PER

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT.

611942- SKID (FT.) (IN.) (IN.) (LBS.)

MIN. WT. PER

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD WALL 100 FT.

611942- SKID (FT.) (IN.) (IN.) (LBS.)

7

PVC 7100* 1

1

⁄

4

”x10’ 03945 2120’ 1.660 .140 42.4

PVC 7100* 1

1

⁄

4

”x20’ 03946 4240’ 1.660 .140 42.4

PVC 7112* 1

1

⁄

2

”x10’ 03947 1650’ 1.900 .145 51.8

PVC 7112* 1

1

⁄

2

”x20’ 03948 3300’ 1.900 .145 51.8

PVC 7200* 2”x10’ 03949 1110’ 2.375 .154 69.5

PVC 7200* 2”x20’ 03950 2220’ 2.375 .154 69.5

PVC 7300* 3”x10’ 03951 1130’ 3.500 .216 144.2

PVC 7300* 3”x20’ 03952 1000’ 3.500 .216 144.2

PVC 7400

†

4”x10’ 03953 670’ 4.500 .237 205.5

PVC 7400

†

4”x20’ 03954 1340’ 4.500 .237 205.5

PVC 7500

†

5”x20’ 04837 760’ 5.563 .258 272.5

PVC 7600

†

6”x10’ 03955 330’ 6.625 .280 361.2

PVC 7600

†

6”x20’ 03956 660’ 6.625 .280 361.2

PVC 7800

†

8”x10’ 13087 180’ 8.625 .322 543.6

PVC 7800

†

8”x20’ 03958 360’ 8.625 .322 543.6

PVC 7910

†

10”x20’ 03959 220’ 10.750 .365 770.7

PVC 7912

†

12”x20’ 03961 120’ 12.750 .406 1019.0

PVC 7914

†

14”x20’ 04862 60’ 14.000 .437 1205.0

PVC 7916

†

16”x20’ 04918 60’ 16.000 .500 1575.7

PVC Schedule 40 DWV Pipe

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665

PVC Schedule 40 DWV Pipe

PVC SCHEDULE 40 (WHITE) PLAIN END PVC 1120 ASTM D 2665

WT. PER

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL 100 FT.

611942- SKID (IN.) (IN.) (LBS.)

* Dual Marked ASTM D 1785 & ASTM D 2665.

† Triple Marked ASTM D 1785 & ASTM D 2665 & ASTM F 480.

NSF Listed. Meets All Requirements of

ASTM D 1784, ASTM D 1785, and

ASTM D 2665.

Pipe Data

Testing with or use of compressed air or gas in PVC / ABS

/ CPVC pipe or fittings can result in explosive failures and

cause severe injury or death.

• NEVER test with or transport/store

compressed air or gas in PVC / ABS / CPVC

pipe or fittings.

• NEVER test PVC / ABS / CPVC pipe or

fittings with compressed air or gas, or air

over water boosters.

• ONLY use PVC / ABS / CPVC pipe or

fittings for water or approved chemicals.

• Refer to warnings on PPFA’s website and

ASTM D 1785.

P

V

C

S

C

H

4

0

D

W

V

P

I

P

E

8

PVC Sewer Pipe

PVC SDR 35 PSM Pipe

SDR-35 GASKETED - PS 46

PART NO. NOM. SIZE UPC # QTY. PER LAYING WT. PER AVG. OD MIN. WALL

611942- SKID (FT.) LENGTH 100 FT. (LBS.) (IN.) (IN.)

S/M 6004G 4”x14’ 11920 840 14’-0” 110.4 4.215 .120

S/M 6004G 4”x20’ 04012 1200 20’-0” 109.7 4.215 .120

S/M 6006G 6”x14’ 11921 462 14’-0” 249.6 6.275 .180

S/M 6006G 6”x20’ 04016 660 20’-0” 247.0 6.275 .180

S/M 6008G 8”x14’ 11922 140 14’-0” 451.0 8.400 .240

ASTM D 3034 & ASTM F 477

Weight is approximate and is for shipping purposes only.

SDR-35 SOLVENT WELD - PS 46

S/M 6004 4”x10’ 04008 600 10’-0” 108.3 4.215 .120

S/M 6004 4”x20’ 04009 1200 20’-0” 108.3 4.215 .120

S/M 6006 6”x10’ 04013 330 10’-0” 241.7 6.275 .180

S/M 6006 6”x20’ 04014 660 20’-0” 241.7 6.275 .180

Weight is approximate and is for shipping purposes only.

Meets All Requirements of ASTM D 3034.

SDR 35 Gaskets meet or exceed ASTM F 477. Gasketed joints meet ASTM D 3212.

Pipe Data

Testing with or use of compressed air or gas in PVC / ABS

/ CPVC pipe or fittings can result in explosive failures and

cause severe injury or death.

• NEVER test with or transport/store

compressed air or gas in PVC / ABS / CPVC

pipe or fittings.

• NEVER test PVC / ABS / CPVC pipe or

fittings with compressed air or gas, or air

over water boosters.

• ONLY use PVC / ABS / CPVC pipe or

fittings for water or approved chemicals.

• Refer to warnings on PPFA’s website and

ASTM D 1785.

NOT FOR PRESSURE

Do not use PVC Sewer pipe for pressure applications. The

use of sewer pipe in pressure applications may result in

system failure and property damage.

PART NO. NOM. SIZE UPC # QTY. PER LAYING WT. PER AVG. OD MIN. WALL

611942- SKID (FT.) LENGTH 100 FT. (LBS.) (IN.) (IN.)

9

PVC ASTM D 2729 Pipe

SOLVENT WELD BELLED END ASTM D 2729

PVC 30030 3” x 10’ 10903 810’ 3.250 0.070 3.00 52.8

PVC 30040 4” x 10’ 10905 500’ 4.215 0.075 3.50 70.4

PVC 30060 6” x 10’ 15149 330’ 6.275 0.100 4.00 129.0

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL BELL DEPTH WT. PER

611942- SKID (IN.) (IN.) (IN.) 100 FT. (LBS.)

PVC Sewer and Drain Pipe

Pipe Data

Perforated PVC ASTM D 2729 Pipe

SOLVENT WELD BELLED END ASTM D 2729

PVC 30030P

3” x 10’ 11814 1040’ 3.250 0.070 3.00 52.8

PVC 30040P

4” x 10’ 11815 500’ 4.215 0.075 3.50 70.4

PART NO. NOM. SIZE UPC # QTY. PER AVG. OD MIN. WALL BELL DEPTH WT. PER

611942- SKID (IN.) (IN.) (IN.) 100 FT. (LBS.)

Weight is approximate and is for shipping purposes only.

Pipe listed in this section meets or exceeds the requirements of ASTMD 2729.

All products manufactured by Charlotte Pipe and Foundry Company are proudly made

in the U.S.A.

NOT FOR PRESSURE

Do not use PVC Sewer pipe for pressure applications. The

use of sewer pipe in pressure applications may result in

system failure and property damage.

Failure to follow safety precautions may result in

misapplication or improper installation and testing which

can cause severe personal injury and / or property damage.

Primers and cements are extremely flammable and may

be explosive. Do not store or use near heat or open

flame, or death or serious injury may occur.

• Solvent fumes created during the joining process are

heavier than air and may be trapped in newly installed

piping systems.

• Ignition of the solvent vapors caused by spark or flame

may result in injury or death from explosion or fire.

• Read and obey all manufacturers' warnings and any

instructions pertaining to primers and cements.

• Provide adequate ventilation to reduce fire hazard and

to minimize inhalation of solvent vapors when working

with cements, primers and new piping systems.

Perforated pipe is supplied with two rows of 1/2” diameter holes every ﬁve inches.

Rows are parallel to the pipe axis and are 120° apart.

P

V

C

S

E

W

E

R

&

D

R

A

I

N

10

ConnecTite® Push-Fit DWV Fittings*

PART NO. CTT 100

ConnecTite Coupling

HUB X HUB

SIZE A B

1

1⁄2

1⁄8

2

15⁄32

2

1⁄8

2

19⁄32

3

6⁄32

3

21⁄32

PART NO. CTT 300

ConnecTite 1/4 Bend

HUB X HUB

SIZE A

1

1⁄2

1

3⁄4

2 2

5⁄16

3 3

PART NO. CTT 321

ConnecTite 1/8 Bend

HUB X HUB

SIZE A

1

1⁄2

1

3⁄32

2 1

15⁄32

3 1

11⁄16

* ConnecTite ttings may be used in PVC-DWV and ABS-DWV systems.

ConnecTite is a registered trademark of Charlotte Pipe and Foundry Company.

11

ConnecTite® Push-Fit DWV Fittings*

PART NO. CTT 400

ConnecTite Sanitary Tee

ALL HUB

SIZE A B

1

1⁄2

1

23⁄32

2

21⁄32

2 2

9⁄32

3

19⁄32

3 3

1⁄32

4

25⁄32

PART NO. CTT 800S

ConnecTite Closet Flange

HUB

SIZE A B C D

4 x 3 7

2

15⁄32 7⁄16

1

23⁄32

* ConnecTite ttings may be used in PVC-DWV and ABS-DWV systems.

ConnecTite is a registered trademark of Charlotte Pipe and Foundry Company.

C

O

N

E

C

T

I

T

E

F

I

T

I

N

G

S

12

PVC and ABS DWV Fittings

ABS

SIZE A B C D

1

⁄

2

1.910 1.895 .687 .156

2 2.385 2.370 .750 .156

3 3.515 3.495 1.500 .218

4 4.515 4.495 1.750 .250

6 6.647 6.614 3.000 .281

PVC

SIZE A B C D

1

⁄

4

1.675 1.650 .687 .156

1

⁄

2

1.915 1.895 .687 .156

2 2.390 2.370 .750 .156

3 3.520 3.495 1.500 .218

4 4.520 4.495 1.750 .250

6 6.647 6.614 3.000 .281

8 8.655 8.610 4.000 .322

10 10.776 10.737 5.000 .365

12 12.778 12.736 6.000 .406

14 14.035 13.985 7.000 .437

16 16.045 15.980 8.000 .500

HUB DIMENSIONS

13

PVC and ABS DWV Fittings

PART NO. 100

Coupling

HUB X HUB

SIZE A B

1

1⁄4

1⁄8

1

5⁄8

1

1⁄2

(PVC)

1⁄8

1

9⁄16

1

1⁄2

(ABS)

1⁄8

1

5⁄8

2

(PVC)

15⁄64

1

3⁄4

2 (ABS)

1⁄8

1

13⁄16

3

3⁄16

3

3⁄16

4

1⁄4

3

3⁄4

6

1⁄4

6

1⁄4

8

(PVC)

1⁄4

8

1⁄4

10

(PVC)

5⁄16

10

3⁄8

12

(PVC)

3⁄8

13

7⁄16

14(F)

(PVC)

3 17

16(F)

(PVC)

3

3⁄8

19

3⁄8

(F) Fabricated

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

P

V

C

&

A

B

S

D

W

V

F

I

T

I

N

G

S

14

PART NO. 101

Female Adapter

FPT X HUB

SIZE A

1

1⁄2

(PVC)

1⁄4

1

1⁄2

(ABS)

3⁄16

2

(PVC)

1⁄4

2 (ABS)

5⁄32

3

(PVC)

5⁄16

3 (ABS)

7⁄32

4

11⁄32

6

(PVC)

1⁄4

6 (ABS)

3⁄32

8

(PVC)

9⁄16

10(F)

(PVC)

2

7⁄8

12(F)

(PVC)

3

3⁄16

PART NO. PVC 101X

Female Adapter with Cleanout Plug

FPT X HUB

SIZE

8

(PVC)

See Part No. 101 and 106

10(F)

(PVC)

12(F)

(PVC)

PVC and ABS DWV Fittings

(F) Fabricated

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

15

PVC and ABS DWV Fittings

PART NO. 102

Pipe Increaser–Reducer

HUB X HUB

SIZE A N

1

1⁄2

x 2

(PVC)

2

5⁄32

17⁄32

1

1⁄2

x 2

(ABS)

2

3⁄32

5⁄8

1

1⁄2

x 3 3

11⁄32

1

3⁄32

2 x 3

(PVC)

3

5⁄32

7⁄8

2 x 3

(ABS)

3

17⁄32

1

1⁄8

2 x 4

(PVC)

4 1

3⁄8

2 x 4

(ABS)

4

1⁄16

1

3⁄8

3 x 4 4

3⁄16

15⁄16

3 x 6

(PVC)

6

1⁄2

2

4 x 6

(PVC)

6

9⁄32

1

3⁄4

4 x 8

(PVC)

7

1⁄2

1

23⁄32

6 x 8

(PVC)

8

13⁄32

1

13⁄32

4 x 10**

(PVC)

11

25⁄64

4

15⁄32

4 x 12**

(PVC)

13

3⁄8

5

19⁄32

4 x 14(F)

(PVC)

19 9

3⁄4

4 x 16(F)

(PVC)

20

5⁄8

10

1⁄4

6 x 10

(PVC)

9

27⁄32

1

7⁄8

6 x 12**

(PVC)

13

3⁄8

4

3⁄8

6 x 14(F)

(PVC)

20

3⁄4

10

15⁄32

6 x 16(F)

(PVC)

22

1⁄8

10

23⁄32

8 x 10

(PVC)

10

3⁄4

1

1⁄16

8 x 12

(PVC)

12

3⁄4

2

1⁄16

8 x 14(F)

(PVC)

22

1⁄2

11

3⁄8

8 x 16(F)

(PVC)

24

1⁄4

12

1⁄8

10 x 12

(PVC)

12

3⁄4

1

11⁄16

10 x 14(F)

(PVC)

17

3⁄4

5

3⁄4

10 x 16(F)

(PVC)

25 12

12 x 14(F)

(PVC)

16

11⁄16

3

3⁄16

12 x 16(F)

(PVC)

20

3⁄4

6

7⁄16

14 x 16(F)

(PVC)

19

7⁄8

4

7⁄16

(F) Fabricated

** Assembled from two molded components

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

P

V

C

&

A

B

S

D

W

V

F

I

T

I

N

G

S

16

PVC and ABS DWV Fittings

PART NO. 103R

Trap Adapter–Male, with 1

1⁄2

” PVC Nut &

Washer & 1

1⁄2

” x 1

1⁄4

” Washer

DWV SPIGOT X TUBULAR SLIP WITH PVC NUT

SIZE A

1

1⁄2

3⁄16

PART NO. 103P

Trap Adapter–Male, with Washer &

Polyethylene Nut

DWV SPIGOT X TUBULAR SLIP

SIZE A

1

1⁄2

x 1

1⁄4

13⁄64

1

1⁄2

13⁄64

2

(PVC)

3⁄16

PART NO. 103

Trap Adapter–Male, Less Washer &

Metal Nut

DWV SPIGOT X TUBULAR SLIP

SIZE A

1

1⁄2

x 1

1⁄4

(PVC)

13⁄64

1

1⁄2

13⁄64

2

3⁄16

PART NO. 103W

Trap Adapter–Male, with Washer & PVC Nut

DWV SPIGOT X TUBULAR SLIP WITH PVC NUT

SIZE A

1

1⁄2

x 1

1⁄4

13⁄64

1

1⁄2

13⁄64

2

3⁄16

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

17

PVC and ABS DWV Fittings

PART NO. 104P

Trap Adapter–Female, with Washer

& Polyethylene Nut

DWV HUB X TUBULAR SLIP

SIZE A

1

1⁄4

(PVC)

3⁄16

1

1⁄2

x 1

1⁄4

5⁄16

1

1⁄2

3⁄16

PART NO. 104R

Trap Adapter–Female, with 1

1⁄2

” PVC Nut

& Washer & 1

1⁄2

” x 1

1⁄4

” Washer

DWV HUB X TUBULAR SLIP WITH PVC NUT

SIZE A

1

1⁄2

3⁄16

PART NO. 104

Trap Adapter–Female

NOTE: NOT A MALE ADAPTER.

DWV HUB X TUBULAR SLIP

SIZE A

1

1⁄2

x 1

1⁄4

5⁄16

1

1⁄2

3⁄16

PART NO. 103X

Trap Adapter–Male, with Washer &

Chrome Nut

DWV SPIGOT X TUBULAR SLIP

SIZE A

1

1⁄2

x 1

1⁄4

13⁄64

1

1⁄2

13⁄64

2

(PVC)

3⁄16

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

P

V

C

&

A

B

S

D

W

V

F

I

T

I

N

G

S

18

PVC and ABS DWV Fittings

PART NO. 105

Fitting Cleanout Adapter

SPIGOT X FPT

SIZE A B

1

1⁄4

(PVC)

3⁄16

3⁄4

1

1⁄2

(PVC)

5⁄32

5⁄8

1

1⁄2

(ABS)

3⁄16

23⁄32

2

(PVC)

5⁄32

5⁄8

2

(ABS)

1⁄16

27⁄32

3

(PVC)

7⁄32

3⁄4

3

(ABS)

7⁄32

1

5⁄32

4

(PVC)

1⁄4

7⁄8

4

(ABS)

7⁄32

1

9⁄32

6

(PVC)

5⁄16

1

7⁄16

8

(PVC)

3⁄8

1

1⁄2

10(F)

(PVC)

15⁄16

2

1⁄4

12(F)

(PVC)

1

1⁄8

2

7⁄16

PART NO. 104X

Trap Adapter–Female, with Washer &

Chrome Nut

DWV HUB X TUBULAR SLIP

SIZE A

1

1⁄4

(PVC)

3⁄16

1

1⁄2

x 1

1⁄4

5⁄16

1

1⁄2

3⁄16

2

3⁄32

PART NO. 104W

Trap Adapter–Female, with Washer

& PVC Nut

DWV HUB X TUBULAR SLIP WITH PVC NUT

SIZE A

1

1⁄4

(PVC)

3⁄16

1

1⁄2

x 1

1⁄4

5⁄16

1

1⁄2

3⁄16

2

3⁄32

(F) Fabricated

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

19

PVC and ABS DWV Fittings

PART NO. 105X

Fitting Cleanout Adapter with

Cleanout Plug

SPIGOT X FPT

SIZE A

For dimensions see part numbers 105 and 106.

PART NO. 106

Cleanout Plug

MPT

SIZE A B

1

1⁄2

1

3⁄8

5⁄8

2

1

3⁄8

5⁄8

2

1⁄2

(ABS)

1

1⁄2

3⁄4

3 1

3⁄4

4 1

7⁄8

6

(PVC)

2 1

6

(ABS)

1

7⁄8

31⁄32

8

(PVC)

2

3⁄8

1

3⁄8

10

(PVC)

2

7⁄16

1

7⁄16

12

(PVC)

2

17⁄32

1

17⁄32

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

P

V

C

&

A

B

S

D

W

V

F

I

T

I

N

G

S

20

PVC and ABS DWV Fittings

PART NO. 107

Flush Bushing

SPIGOT X HUB

SIZE C

1

⁄

2

x 1

1

⁄

4

3

⁄

16

2 x 1

1

⁄

4

5

⁄

16

2 x 1

1

⁄

2

(PVC)

5

⁄

16

2 x 1

1

⁄

2

(ABS)

1

⁄

8

3 x 1

1

⁄

2

(PVC)

1

3 x 1

1

⁄

2

(ABS)

25

⁄

32

3 x 2

(PVC)

7

⁄

8

3 x 2

(ABS)

23

⁄

32

4 x 2

(PVC)

1

⁄

8

4 x 2

(ABS)

1

3

⁄

16

4 x 3

(PVC)

1

⁄

2

4 x 3

(ABS)

1

⁄

4

6 x 4

(PVC)

1

3

⁄

4

6 x 4

(ABS)

1

21

⁄

32

8 x 4

(PVC)

2

7

⁄

8

8 x 6

(PVC)

1

5

⁄

8

10 x 4**

(PVC)

4

7

⁄

16

10 x 6**

(PVC)

3

5

⁄

32

10 x 8

(PVC)

1

⁄

2

12 x 4**

(PVC)

5

⁄

32

12 x 6**

(PVC)

4

5

⁄

32

12 x 8

(PVC)

2

1

⁄

2

12 x 10

(PVC)

1

⁄

2

** Assembled from two molded components

Note: If PVC or ABS is not listed for a specic size, that size tting is available in PVC and

ABS materials, and the dimensions listed are the same for both materials.

Page is loading ...

Charlotte Pipe PVC 00304 1200 User guide

Charlotte Pipe PVC 00304 1200 User guide

Related papers

Other documents