JasonL SFCB418PT Operating instructions

Type
Operating instructions

This manual is also suitable for

Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran System
4 Person Workstation
Size: 1800x800
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Leg x6
Adjustable Foot x6
Leg Cable Cover x6
Rail Lengths x4 (1520mm)
Rail Widths x3 (620mm)
2 Way Connector x4
2 Way Connector Cap x4
3 Way Connector x2
3 Way Connector Cap x2
Rail Space Bracket x2
Slot Nut x8
Table Top x4 (1800mm x 800mm)
Support Connector x6
1
2
3
4
5
6
7
8
9
10
11
12
13
M8x20mm Dome Head x2
M8x12mm Dome Head x20
M8x20mm Cap Head x6
M5x20mm Self Tapping x26
14
15
16
17
COMPONENTS
SCREWS
INSTALLATION GUIDE
San Fran System
4 Person Workstation
Size: 1800x800
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
12 15
13
9
16
4
8
31
2
6
7
5
15
10
14
11
INSTALLATION GUIDE
San Fran System
4 Person Workstation
Size: 1800x800
01 02
04
Slide the 2 way and 3 way connectors over each leg, and securely lock into place
using M8x20mm cap head bolts.
Loosely connect the longer M8x20mm dome head bolt and slot nut through the
rail spacer bracket. Slide onto required rails and fully tighten in place.
Securely connect legs to rails lenghts using the shorter M8x20mm dome head
bolts.
03
Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05
Securely connect legs to rails widths using the shorter M8x12mm dome head
bolts.
Ensure the work surfaces are centered over the frame. Fully tighten all M5x20mm
self tapping screws through each leg rail spacer and support connector bracket
into the work surfaces.
Cancel any power box cable using the magnetic leg cable covers.
INSTALLATION GUIDE
San Fran System
4 Person Workstation
Size: 1800x800
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
06
07
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

JasonL SFCB418PT Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI