2. SMITH SYSTEM
  3. 179868

SMITH SYSTEM 179868 Assembly Instructions

  • Hello! I've reviewed the Quick Installation Guide for the SMITHSYSTEM Student Desk models 01600, 01601, 01650, and 01651. This guide provides step-by-step instructions for assembling the desk, including fastening legs and cross braces, and adjusting the desk height using an Allen wrench. I'm ready to answer your questions about the assembly process or the features of these desks.
  • How many wood screws are required for installation?
    How many M8x12MM cap screws are needed?
    What tool is used to adjust the table height?
#10 Wood Screw (14) Cross Brace (1)
Adjustable T-Legs (2)
Table top (1)
3/8"-16 Dog Nut Screw (4)
Allen Wrench (2)
Silhouette Student Desk Quick Installation Guide
Required for Installation Instructions
M8x12MM Cap Screws (4)
MODELS
Form# 179868
01600 01601
01650 01651
Rev. 08/2010
Step 1: Loosely attach legs with #10 wood screws (14)
and cross brace using the M8x12MM cap screws
(4). (Be sure to loosely attach the screws).
Step 2: Flip table over on a smooth, clean surface with
the bottom facing up.
Step 3: Using supplied Allen Wrench go back and
tighten the cap screws on the cross brace.
Step 4: Tighten the #10 wood screws into the table.
Adjust table to desired height using the
supplied Allen Wrench. Carefully flip the desk
over, desk is now ready for use.
/