2. JasonL
  3. SFWB218PT

JasonL SFWB218PT, SFBB218PT, SFCB218PT Operating instructions

  • Hello! I've analyzed the provided installation guide for the San Fran System 2 Person Workstation and am ready to assist you with any questions. The guide includes step-by-step instructions for assembling your new workstation, focusing on proper connections for legs, rails, and tabletops, as well as advice on cable management. Please feel free to ask any questions about the assembly process or the workstation.
  • What tools are required for installation?
    What should I do with pre-drilled holes?
    What kind of screws should I use to secure the tops?
Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed directly into the
underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800x800 mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Leg x4
Adjustable Foot x4
Leg Cable Cover x4
Rail Lengths x2 (1290mm)
Rail Widths x2 (620mm)
2 Way Connector x4
2 Way Connector Cap x4
Slot Nut x4
Table Top x2 (1800x800mm)
Support Connector x4
1
2
3
4
5
6
7
8
9
10
M8x20mm Dome Head x8
M8x12mm Dome Head x4
M8x20mm Cap Head x4
M5x20mm Self Tapping x12
11
12
13
14
COMPONENTS
SCREWS
Page 2 of 4
INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800x800 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
9
4
3
1
2
6
7
10 5
11
812
13
01 02
03 04
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto 620mm rails and 1290mm.
Securely connect legs to rails lenghts using the shorter M8x20mm dome head
bolts.
Ensure the worksurface is centered over the frame. Fully tighten all M5x20mm self
tapping screws through each leg and support bracket into the worksurface.
Page 3 of 4
INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800x800 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Conceal any power cable using the magnetic leg cable covers.
Page 4 of 4
05
INSTALLATION GUIDE
San Fran System
2 Person Workstation
Size: 1800x800 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
/