Kichler Lighting 43293BK User manual

Brand
Kichler Lighting
Model
43293BK
Type
User manual

Kichler Lighting 43293BK is a lighting fixture that can be mounted on a ceiling. It comes with a mounting strap that can be adjusted to suit the position of the fixture. The fixture has a ground wire that must be connected to the outlet box ground wire. The fixture also has black and white power supply wires that must be connected to the corresponding wires in the outlet box. The fixture can accommodate a variety of bulbs, including incandescent, CFL, and LED bulbs. The fixture comes with a glass shade that is held in place by a hexnut.

Kichler Lighting 43293BK is a lighting fixture that can be mounted on a ceiling. It comes with a mounting strap that can be adjusted to suit the position of the fixture. The fixture has a ground wire that must be connected to the outlet box ground wire. The fixture also has black and white power supply wires that must be connected to the corresponding wires in the outlet box. The fixture can accommodate a variety of bulbs, including incandescent, CFL, and LED bulbs. The fixture comes with a glass shade that is held in place by a hexnut.

Date Issued: 06/25/16 IS-43293-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fuse
box before starting and during the installation.
1) Remove shipping support bracket.
2) Find the appropriate threaded holes on mounting strap. As-
semble mounting screws into threaded holes.
3) Attach mounting strap to outlet box. Mounting strap can be
adjusted to suit position of fixture.
4) Grounding instructions: (See Illus. A or B)
A) On fixtures where mounting strap is provided with a
hole and two raise dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B) On fixtures where a cupped washer is provided. Put
ground wire from outlet box under cupped washer and
green ground screw and thread screw into hole in
mounting strap.
If fixture is provided with ground wire. Connect fixture
ground wire to outlet box ground wire with wire connector,
after following the above steps. Never connect ground wire
to black or white power supply wires.
5) Make wire connections. Reference chart below for correct
connections and wire accordingly.
6) Push fixture to ceiling, carefully passing mounting screws
through holes.
7) Pass lockwashers on mounting screws and secure fixture to
ceiling with threaded lockup knobs.
8) Insert threaded nipple into coupling center of fixture below
sockets. Secure by holding coupling and tighten hexnut
with wrenches.
9) Insert recommended bulbs.
10) Raise glass into fixture carefully passing hole in glass over
long threaded pipe. Pass glass support washer over thread-
ed pipe. Smaller diameter should fit inside glass. Thread
and tighten hexnut to secure glass to fixture. (DO NOT
over-tighten). Thread finial on threaded pipe and tighten to
glass. (DO NOT over-tighten).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
A
B
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
Date Issued: 06/25/16 IS-43293-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
OUTLET BOX
WIRE
CONNECTOR(S)
MOUNTING STRAP
MOUNTING SCREW(S)
STRAP
MOUNTING
SCREW
SCREW(S)
SHIPPING SUPPORT BRACKET
REMOVE
LOCKWASHER
LOCK-UP
KNOB
HEXNUT
LONG
THREADED
PIPE
GLASS SUPPORT WASHER
HEXNUT
FINIAL
  • Page 1 1
  • Page 2 2

Kichler Lighting 43293BK User manual

Brand
Kichler Lighting
Model
43293BK
Type
User manual

Kichler Lighting 43293BK is a lighting fixture that can be mounted on a ceiling. It comes with a mounting strap that can be adjusted to suit the position of the fixture. The fixture has a ground wire that must be connected to the outlet box ground wire. The fixture also has black and white power supply wires that must be connected to the corresponding wires in the outlet box. The fixture can accommodate a variety of bulbs, including incandescent, CFL, and LED bulbs. The fixture comes with a glass shade that is held in place by a hexnut.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents