Generation Lighting OL5408BK Installation guide

Brand
Generation Lighting
Model
OL5408BK
Type
Installation guide
(E) 4/07
ASSEMBLY INSTRUCTIONS FOR OL5407, OL5408
Bulb
(not included)
Candle
Tube
Top Cover
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Rubber Washer
Center Pipe
Main Frame
Socket
Post Cup
Post
(not supplied)
Sheet Metal Screw
Fixture Wire
Fixture Ground Wire
Supply Wire
Supply
Ground Wire
Finial
Carefully unpack and identify all parts before
assembly. Bulb is not included.
1. Slip candle cover tube onto sockets.
2. Install light bulb (Not Included). See relampinglabel
located at socket area for type and maximumallowed
wattage.
3. Screw center pipe onto center body. Note correctposition
of center pipe as shown in illustration.
4. Slip the top cover, and rubber washerthrough the
installed center pipe. Lock them alltogether by fastening
with finial.
5. Electrical installation onto post: If you arereplacing an
existing fixture, disconnect andremove the old fixture.
A) Slip post cup over post. Mark position ofholes in post cup
on post.
B) Remove post cup and expose the supplywiring from above
post. Drill 1/8" (3mm)diameter pilot holes in post at
places wheremarked.
C) Make wire connections. (wire connectors notprovided).
Refer to chart below for correctconnections. Wire supply
wires to fixture wiresaccordingly.
D) Connect ground wire from supply source tofixture ground
wire with connector. Neverconnect ground wire to black
or white powersupply wires. Carefully place wires inside
post.
E) Slip post cup onto post. Align holes in postcup with holes
in post. Attach post cup to postwith sheet metal screws.
Tracer Wire
*Note: When parallel wire (SPT 1 & SPT2)
is used. One wire is square shaped or
ridged and the other wire will be round
in shape or smooth. (See Illustration)
Connect Black Fixture Wire to:
Black Supply Wire or
*Parallel cord
(round & smooth)
Clear, Brown, Gold or Black
without tracer
Insulated wire
(other than green)
with copper conductor
Connect White Fixture Wire to:
White Supply Wire or
*Parallel cord
(square & ridged)
Clear, Brown, Gold or Black
with tracer
Insulated wire
(other than green)
with silver conductor
  • Page 1 1

Generation Lighting OL5408BK Installation guide

Brand
Generation Lighting
Model
OL5408BK
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents