Kichler Lighting 43755AUB User manual

Brand
Kichler Lighting
Model
43755AUB
Type
User manual

Kichler Lighting 43755AUB

The Kichler Lighting 43755AUB is a versatile and stylish lighting fixture that can be used in a variety of applications. With its adjustable mounting strap, the fixture can be positioned to provide the perfect amount of light for any space. The fixture also features a decorative wood finish that adds a touch of elegance to any room.

The Kichler Lighting 43755AUB is easy to install and comes with all the necessary hardware. The fixture can be mounted on a ceiling or wall, and the adjustable chain link allows you to customize the height of the fixture to suit your needs.

Kichler Lighting 43755AUB

The Kichler Lighting 43755AUB is a versatile and stylish lighting fixture that can be used in a variety of applications. With its adjustable mounting strap, the fixture can be positioned to provide the perfect amount of light for any space. The fixture also features a decorative wood finish that adds a touch of elegance to any room.

The Kichler Lighting 43755AUB is easy to install and comes with all the necessary hardware. The fixture can be mounted on a ceiling or wall, and the adjustable chain link allows you to customize the height of the fixture to suit your needs.

1) Place one decorative wood piece up against frame of fixture with hole in wood
piece against frame of fixture. From inside frame of fixture, thread screw into hole
in frame and into hole in wood piece. Carefully tighten screw to secure wood
piece to frame. Repeat step for remaining decorative wood pieces.
2) Pass fixture wire from coupling on top of fixture body through stem. Screw stem
onto coupling.
3) Pass wire from center tube through stem and screw stem to top of center tube.
NOTE: Thread locking compound must be applied to all stem threads as noted
with symbol (3) to prevent accidental rotation of fixture during cleaning, relamping, etc.
4) Pass fixture wire through remaining stems and screw stems together.
5) Thread one small threaded pipe into end of each small loop.
6) Pass fixture wire through first loop. Thread first loop onto end of last stem.
7) Pass fixture wire through second loop and through hole in canopy.
8) Pass threaded pipe at end of second loop through hole in canopy.
9) Pass fixture wire through hole in lockwasher. Thread lockwasher onto end of
threaded pipe protruding from inside canopy.
10) Pass fixture wire through hole in hexnut. Thread hexnut onto end of threaded pipe.
11) Attach chain link to small loop at end of stem and to loop on canopy.
12) TURN OFF POWER.
IMPORTANT: Before you start, NEVER attempt any work without shutting off the
electricity until the work is done.
a) Go to the main fuse, or circuit breaker, box in your home. Place the main
power switch in the “OFF” position.
b) Unscrew the fuse(s), or switch “OFF” the circuit breaker switch(s), that control
the power to the fixture or room that you are working on.
c) Place the wall switch in the “OFF” position. If the fixture to be replaced has a
switch or pull chain, place those in the “OFF” position.
13) Find the appropriate threaded holes on mounting strap. Assemble mounting
screws into threaded holes.
14) Attach mounting strap to outlet box. (Screws not provided). Mounting strap can
be adjusted to suit position of fixture.
15) Grounding instructions: (See Illus. A or B).
A) On fixtures where mounting strap is provided with a hole and two raised
dimples. Wrap ground wire from outlet box around green ground screw, and
thread into hole.
B) On fixtures where a cupped washer is provided. Attach ground wire from
outlet box under cupped washer and green ground screw, and thread into
mounting strap.
If fixture is provided with ground wire. Connect fixture ground wire to outlet box
ground wire with wire connector. (Not provided.) After following the above steps.
Never connect ground wire to black or white power supply wires.
16) Make wire connections (connectors not provided.) Reference chart below for
correct connections and wire accordingly.
17) Push fixture to ceiling, carefully passing mounting screws through holes in canopy.
18) Thread knurl knobs onto mounting screws. Tighten knurl knobs to secure fixture
to ceiling.
19) Pass large hole in top of harp over socket. Thread socket ring onto socket.
Tighten socket ring to secure harp in place.
20) Screw short end of threaded pipe with hexnut into hole in bottom of harp.
21) Raise shade up to fixture. Pass top of shade over harp.
22) Carefully slip hole in center of glass diffuser over end of threaded pipe.
23) Slip rubber washer then flat washer over end of threaded pipe protruding from
bottom of glass diffuser.
24) Thread hexnut onto end of threaded pipe protruding from bottom of glass diffuser.
(DO NOT over tighten.)
25) Slip bottom trim over end of threaded pipe protruding from bottom of glass
diffuser.
26) Thread finial onto end of threaded pipe protruding from bottom of glass diffuser.
(DO NOT over tighten.)
GREEN GROUND
SCREW
CUPPED
WASHER
A
B
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
(NOT PROVIDED)
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
Date Issued: 12/4/15
IS-43755-US
CANOPY
ESCUDETE
STEM
VÁSTAGO
KNURL KNOB
PERILLA ESTRADA
4
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
SHADE
PANTALLA
SMALL LOOP
ARGOLLA
PEQUEÑA
CHAIN LINK
ESLABÓN DE CADENA
MOUNTING STRAP
ABRAZADERA DE MONTAJE
4
THREADED PIPE
TUBO ROSCADA
FLAT WASHER
ARANDELA PLANA
RUBBER WASHER
ARANDELA DE CAUCHO
HEXNUT
TUERCA HEXAGONAL
FINIAL
CAPUCHON
HEXNUT
TUERCA HEXAGONAL
BOTTOM TRIM
GUARNICIÓN
INFERIOR
DECORATIVE WOOD PIECE
PIEZA DE MADERA DECORATIVA
HARP
ARMAZÓN
SOCKET RING
ANILLO DEL CASQUILLO
DIFFUSER
DIFUSOR
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
SCREW
TORNILLO
Page is loading ...
1) Place one decorative wood piece up against frame of fixture with hole in wood
piece against frame of fixture. From inside frame of fixture, thread screw into hole
in frame and into hole in wood piece. Carefully tighten screw to secure wood
piece to frame. Repeat step for remaining decorative wood pieces.
2) Pass fixture wire from coupling on top of fixture body through stem. Screw stem
onto coupling.
3) Pass wire from center tube through stem and screw stem to top of center tube.
NOTE: Thread locking compound must be applied to all stem threads as noted
with symbol (3) to prevent accidental rotation of fixture during cleaning, relamping, etc.
4) Pass fixture wire through remaining stems and screw stems together.
5) Thread one small threaded pipe into end of each small loop.
6) Pass fixture wire through first loop. Thread first loop onto end of last stem.
7) Pass fixture wire through second loop and through hole in canopy.
8) Pass threaded pipe at end of second loop through hole in canopy.
9) Pass fixture wire through hole in lockwasher. Thread lockwasher onto end of
threaded pipe protruding from inside canopy.
10) Pass fixture wire through hole in hexnut. Thread hexnut onto end of threaded pipe.
11) Attach chain link to small loop at end of stem and to loop on canopy.
12) TURN OFF POWER.
IMPORTANT: Before you start, NEVER attempt any work without shutting off the
electricity until the work is done.
a) Go to the main fuse, or circuit breaker, box in your home. Place the main
power switch in the “OFF” position.
b) Unscrew the fuse(s), or switch “OFF” the circuit breaker switch(s), that control
the power to the fixture or room that you are working on.
c) Place the wall switch in the “OFF” position. If the fixture to be replaced has a
switch or pull chain, place those in the “OFF” position.
13) Find the appropriate threaded holes on mounting strap. Assemble mounting
screws into threaded holes.
14) Attach mounting strap to outlet box. (Screws not provided). Mounting strap can
be adjusted to suit position of fixture.
15) Make wire connections (connectors not provided.) Reference chart below for
correct connections and wire accordingly.
16) Push fixture to ceiling, carefully passing mounting screws through holes in canopy.
17) Thread knurl knobs onto mounting screws. Tighten knurl knobs to secure fixture
to ceiling.
18) Pass large hole in top of harp over socket. Thread socket ring onto socket.
Tighten socket ring to secure harp in place.
19) Screw short end of threaded pipe with hexnut into hole in bottom of harp.
20) Raise shade up to fixture. Pass top of shade over harp.
21) Carefully slip hole in center of glass diffuser over end of threaded pipe.
22) Slip rubber washer then flat washer over end of threaded pipe protruding from
bottom of glass diffuser.
23) Thread hexnut onto end of threaded pipe protruding from bottom of glass diffuser.
(DO NOT over tighten.)
24) Slip bottom trim over end of threaded pipe protruding from bottom of glass
diffuser.
25) Thread finial onto end of threaded pipe protruding from bottom of glass diffuser.
(DO NOT over tighten.)
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth)
*Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
Date Issued: 12/4/15
IS-43755-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installation Au Canada
MOUNTING STRAP
PATTE DE FIXATION
CANOPY
CACHE
KNURL KNOB
BOUTON MOLETÉ
SMALL LOOP
PETITE BOUCLE
STEM
TIGE
CHAIN LINK
MAILLON DE
LA CHAÎNE
3
3
SHADE
PANTALLA
THREADED PIPE
TUBO ROSCADO
FLAT WASHER
ARANDELA PLANA
HEXNUT
TUERCA HEXAGONAL
RUBBER WASHER
ARANDELA DE GOMA
BOTTOM TRIM
ADORNO INFERIOR
FINIAL
CAPUCHÓN
DIFFUSER
DIFUSOR
SCREW
VIS
HARP
HARPE
SOCKET RING
ANNEAU DE LA DOUILLE
SEE OTHER SIDE FOR CANADIAN FRENCH TRANSLATIONS.
VOIR L’AUTRE CÔTÉ POUR LES CANADIENS TRADUCTIONS EN
FRANÇAIS.
DECORATIVE WOOD PIECE
MORCEAU DE BOIS DÉCORATIF
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Kichler Lighting 43755AUB User manual

Brand
Kichler Lighting
Model
43755AUB
Type
User manual

Kichler Lighting 43755AUB

The Kichler Lighting 43755AUB is a versatile and stylish lighting fixture that can be used in a variety of applications. With its adjustable mounting strap, the fixture can be positioned to provide the perfect amount of light for any space. The fixture also features a decorative wood finish that adds a touch of elegance to any room.

The Kichler Lighting 43755AUB is easy to install and comes with all the necessary hardware. The fixture can be mounted on a ceiling or wall, and the adjustable chain link allows you to customize the height of the fixture to suit your needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents