Siemens VersiCharge AC Series Commercial User manual
- Type
- User manual
Siemens VersiCharge AC Series Commercial offers smart charging solutions for businesses and public places. With its advanced features, it streamlines EV charging operations and provides a user-friendly experience. Here are some key capabilities:
-
Smart Load Management: Optimizes power distribution to prevent overloading and ensures efficient charging for multiple EVs simultaneously.
-
Remote Management: Allows you to monitor and control charging stations remotely via the VersiCharge mobile app or web portal.
-
Flexible Charging Options: Supports various payment methods, including RFID cards, mobile apps, and direct billing, providing convenience for EV drivers.
Siemens VersiCharge AC Series Commercial offers smart charging solutions for businesses and public places. With its advanced features, it streamlines EV charging operations and provides a user-friendly experience. Here are some key capabilities:
-
Smart Load Management: Optimizes power distribution to prevent overloading and ensures efficient charging for multiple EVs simultaneously.
-
Remote Management: Allows you to monitor and control charging stations remotely via the VersiCharge mobile app or web portal.
-
Flexible Charging Options: Supports various payment methods, including RFID cards, mobile apps, and direct billing, providing convenience for EV drivers.
Siemens AG
Smart Infrastructure
Schuhstr. 60
91052 Erlangen
GERMANY
Ⓟ
01/2023 Subject to change
Copyright © Siemens AG 2023.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to
prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a
safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices
shown below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger
will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning
relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation, in particular its warning notices and safety
instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant
technical documentation. If products and components from other manufacturers are used, these must be
recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning,
operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant
documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of
the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
VersiCharge Configurator
Installation Manual, 1/2023, 3
Table of contents
1 VersiCharge Configurator Installation .....................................................................................................4
2 Install the VersiCharge Configurator .......................................................................................................5
3 Repair or Remove Installation ................................................................................................................ 10
4
VersiCharge Configurator
Installation Manual, 1/2023,
VersiCharge Configurator Installation
1
Install VersiCharge Configurator on a Windows 10 operating system to commission
chargers.
The following chargers are supported by the VersiCharge Configurator:
•All VersiCharge UL models are supported except those with part numbers 8EM131X-
XXX10-XXXX
•VersiCharge IEC models with part numbers 8EM131X-XXX0X-XXXX
To view the Configurator user manual, click on the Help icon.
The installation package can be found at usa.siemens.com/versicharge and
siemens.com/versicharge.
VersiCharge Configurator
Installation Manual, 1/2023, 5
Install the VersiCharge Configurator
2
Note
These instructions only apply to the version number listed on the title page.
VersiCharge Configurator installation steps:
1. Download and store the installation package in a local folder.
The installation package is a zip file with the naming convention,
VersiCharge_Configurator_Setup_v<version>.zip.
2. Extract the zipped files into the folder of your choice.
3. Navigate to the extracted zip files and double-click
Setup.exe
.
The Installation Splash screen appears.
Install the VersiCharge Configurator
6
VersiCharge Configurator
Installation Manual, 1/2023
4. Click
Next
to initiate the setup wizard.
If an older version of the Siemens VersiCharge Configurator is already installed on
your system, the setup wizard will prompt you to upgrade to the newer version.
–To upgrade to the recent version, click
Next
.
Note
The Setup Wizard will remove the existing version of Siemens VersiCharge
Configurator and replace it with the recent version.
–To exit the setup wizard, click
Cancel
.
Install the VersiCharge Configurator
VersiCharge Configurator
Installation Manual, 1/2023 7
5. Read the
End User License Agreement
. Select the checkbox to accept the terms of the
agreement and click
Next
.
6. Specify the destination folder to install.
–To continue with the default installation path, click
Next
.
–If you wish to change the default installation location, click
Browse
, select the
preferred directory, and click
Next
.
Install the VersiCharge Configurator
8
VersiCharge Configurator
Installation Manual, 1/2023
7. Click
Install
to begin installation.
8. Wait for the setup wizard to complete the installation.
–You can monitor the progress of the installation and details of the components
installed in the left pane.
–To cancel the installation, click
Cancel
.
Note
If you cancel the installation process during the setup, the currently installed
version will be removed from your computer.
Install the VersiCharge Configurator
VersiCharge Configurator
Installation Manual, 1/2023 9
9. After successful installation, click
Finish
to complete the installation and exit the
installation wizard.
–Click on the logfile in the installation wizard to review the installation log.
–Click
Siemens Industry > VersiCharge-Configurator
in the Start Menu or double-
click the VersiCharge-Configurator desktop shortcut to launch the application.
VersiCharge Configurator
Installation Manual, 1/2023, 10
Repair or Remove Installation
3
To repair or remove the existing installation on your computer, perform the following
steps.
1. Modify the installation using the setup wizard or control panel.
–Navigate to the extracted zip files and double-click
Setup.exe.
–Click
Control Panel > Programs > Programs and Features
from the start menu
.
Select
Siemens VersiCharge Configurator
from the list and then click
Uninstall/Change.
The setup determines the existing installation on your computer and the setup wizard
appears.
2. Click
Next
to proceed.
Repair or Remove Installation
VersiCharge Configurator
Installation Manual, 1/2023 11
3. Choose if you want to repair or remove.
–To repair, select
Repair
and click
Next
.
The setup wizard will fix missing and corrupt files, shortcuts, and registry entries.
–To remove, select
Remove
and click
Next
.
The setup removes the existing installation from your computer.
Repair or Remove Installation
12
VersiCharge Configurator
Installation Manual, 1/2023
4. Review and confirm before the setup starts.
–To repair the existing installation, click
Repair.
–To remove the existing installation, click
Remove
.
–To review your choices and return to the previous step, click
Back
.
–To exit the wizard, click
Cancel
.
Repair or Remove Installation
VersiCharge Configurator
Installation Manual, 1/2023 13
5. Wait for the setup wizard to complete the action.
–After the setup repairs the installation, click
Finish
to exit the setup wizard.
–After the setup removes the installation components, click
Finish
to exit the setup
wizard.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
Siemens VersiCharge AC Series Commercial User manual
- Type
- User manual
Siemens VersiCharge AC Series Commercial offers smart charging solutions for businesses and public places. With its advanced features, it streamlines EV charging operations and provides a user-friendly experience. Here are some key capabilities:
-
Smart Load Management: Optimizes power distribution to prevent overloading and ensures efficient charging for multiple EVs simultaneously.
-
Remote Management: Allows you to monitor and control charging stations remotely via the VersiCharge mobile app or web portal.
-
Flexible Charging Options: Supports various payment methods, including RFID cards, mobile apps, and direct billing, providing convenience for EV drivers.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Siemens US2:VC30GRYHW Installation guide
-
-
-
Siemens 8EM13125AF100AA3 Installation guide
-
-
-
-
-
-
Siemens ECHS100 User guide
Other documents
-
Pepperl+Fuchs OIT500-F113-B17-CB Owner's manual
-
Schneider Electric AVEVA System Platform Installation guide
-
Kofax SafeCom 10.7.0 Operating instructions
-
Vertiv Liebert® iCOM™-S User manual
-
Diebold Nixdorf ProBase Store 2 User manual
-
ETAS ES820 User guide
-
AMS Device Manager v14.5 FP2 Planning and Installation guide
-
-
-
Ganz CORTROL User guide
