2. ROOMS TO GO
  3. 73020263

ROOMS TO GO 73020263, 73020275 Assembly Instructions

  • Hello! I have reviewed the assembly instructions for the SHGP SOLANA KD 73020263/73020275 Coffee Table. This document provides a step-by-step guide on how to assemble the table, including attaching the legs, using bolts and washers, and placing bolt head caps. I'm ready to answer any questions you might have about the assembly process or the parts involved.
  • What should I do before assembly?
    What is the first step in assembly?
    How do I attach the legs?
ASSEMBLY INSTRUCTIONS
SHGP SOLANA KD COFFEE TABLE
Manufactured for Rooms To Go SKU 73020263/73020275
Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come
loose inside the carton during shipment. Identify and count all parts and compare with the Hardware List below
Step 1: Place the Top(Part A) on a clean, soft surface as a blanket or carpet with bottom upward. Assemble the Leg(Part B) to the
Top(Part A) by Bolt M6*20(Part D) and washer(Part Y), middle position first, left and right sides second, tighten with Allen Key(Part Z).
Put the Bolt Head Cap(Part X) on the Bolts.
Step 2: After assembly, your product is ready for use.
①②
③
D
PARTS LIST PARTS LIST
NO.: PIC DESC QTY NO.: PIC DESC QTY
A Top 1pc D Bolt(M6*20) 8pcs
B Leg 2pcs X Bolt Head Cap(Ø15*4.5) 6pcs
Y Washer(Ø16*Ø6.5*1) 8pcs Z Allen Key 1pc
Periodically check and make sure all bolts are fully tightened.
/