ROOMS TO GO 73320269 Assembly Instructions

ASSEMBLY INSTRUCTIONS

SHGP SOLANA KD END TABLE

Manufactured for Rooms To Go SKU 73320269/73320271

Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come

loose inside the carton during shipment. Identify and count all parts and compare with the Hardware List below

Step 1: Place the Top(Part A) on a clean, soft surface as a blanket or carpet with bottom upward. Assemble the Leg(Part B) to the

Top(Part A) by Bolt M6*20(Part D) and washer(Part Y), middle position first, left and right sides second, tighten with Allen Key(Part

Z).Put the Bolt Head Cap(Part X) on the Bolts.

Step 2: After assembly, your product is ready for use.

①

③④

②

PARTS LIST PARTS LIST

NO.: PIC DESC QTY NO.: PIC DESC QTY

A Top 1pc D Bolt(M6*20) 6pcs

B Leg 2pcs X Bolt Head Cap(Φ14*6) 6pcs

Y Washer(Φ14* Φ6.5*1.0) 6pcs Z Allen Key 1pc

Periodically check and make sure all bolts are fully tightened.

This manual is also suitable for

Download PDF