ROOMS TO GO 70314465, 70314439, 70314441, 70314453, 70314477, 70314489, 71514422 Assembly Instructions

Hello! I've reviewed the assembly instructions for the Rooms To Go SHGP HDPE Rocking Chair models 71514422, 70314439, 70314441, 70314453, 70314465, 70314477 and 70314489. This document provides a detailed step-by-step guide on how to assemble your new chair, with a parts list and visual aids. It also highlights important caution about pre-assembling bolts loosely and not fully turning them until all are in place. I'm here to help you with any questions you have during the assembly process.
What should I do before assembling the chair?

What should I do with the bolts when assembling?

What tool is needed for assembly?

ASSEMBLY INSTRUCTIONS

SHGP HDPE ROCKING CHAIR

Manufactured for Rooms To Go SKU

71514422/70314439/70314441/70314453/70314465/70314477/70314489

Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose

inside the carton during shipment. Identify and count all parts and compare with the Hardware List below

Caution: Loosely pre-assemble all the bolts first. Do not fully turn until all bolts are inserted into the proper holes.

Step 1: Place Seat(Part A) on a clean, soft surface as a blanket or carpet. Assemble Left Leg with Armrest(Part D) to the Seat by Bolt(Part

G) and tighten with Allen key (Part I). Assemble Right Leg with Armrest(Part C) to the Seat(Part A) by Bolt(Part G) and tighten with Allen

key (Part I).

Step 2: Put the Bolt(Part H) into the holes on the side of Seat(Part A), and tighten with Allen key(Part I).

Step 3: Assemble Seat(Part B) to the Back leg by Bolt(Part G) and tighten with Allen key (Part I).

Step 4: After tightening all bolts, your product is ready for use.

PARTS LIST PARTS LIST

NO.: PIC DESC QTY NO.: PIC DESC QTY

A Seat 1pc F Front Bar 1pc

B Back 1pc G Bolt(M6*65) 12pcs

C Right Armrest with Leg 1pc H Bolt(M6*50) 6pcs

D Left Armrest with Leg 1pc I Allen key 1pc

E Back Bar 1pc

Periodically check and make sure all bolts are fully tightened.