Wireless Sounder Weather Resistant Kit

Installation Guide

©2015 EMS Security Group Ltd All rights reserved Page 1 of 2 TSD076 Iss 7 10/02/2016 AJM

Ensure that you have all of the required parts as detailed

below.

1 Supplied Parts

FC-179-002 Wireless Sounder Weather Resistant Kit

4 Fit Small O-Ring

Fit the Small O-Ring (Item 6) to the top of the Wireless

Fit the Rubber Plug (item 7) into the cavity on the Sounder

Visual Indicator.

Remove the Sounder / Visual Indicator from the Wireless

Module by turning it anticlockwise.

5

10 Secure Mounting Plate

Remove the three exposed screws. The battery retaining

plate must also be removed.

Fit the device on to the Perspex Mounting Plate (Item 2) with

the O-Ring between them as shown.

Specification

Regulatory Information