EMS FireCell Wireless Sounder Weather Resistant Kit Installation guide

Brand: EMS

Model: FireCell Wireless Sounder Weather Resistant Kit

Type: Installation guide

EMS FireCell Wireless Sounder Weather Resistant Kit is a wireless sounder and visual indicator for a fire alarm system with an IP55 rating, making it suitable for outdoor use. It can be used with any FireCell wireless sounder and visual indicator variants. The kit includes a mounting plate, screws, washers, rubber plug, and two O-rings to ensure a secure and weatherproof installation. The rubber plug should be located at the bottom of the device to prevent water ingress. The device has a diameter of 155mm and a depth of 12mm, and weighs 0.25Kg. It complies with BS EN 60529:2000.

EMS FireCell Wireless Sounder Weather Resistant Kit is a wireless sounder and visual indicator for a fire alarm system with an IP55 rating, making it suitable for outdoor use. It can be used with any FireCell wireless sounder and visual indicator variants. The kit includes a mounting plate, screws, washers, rubber plug, and two O-rings to ensure a secure and weatherproof installation. The rubber plug should be located at the bottom of the device to prevent water ingress. The device has a diameter of 155mm and a depth of 12mm, and weighs 0.25Kg. It complies with BS EN 60529:2000.

Wireless Sounder Weather Resistant Kit

Installation Guide

Ensure that you have all of the required parts as detailed

below.

1 Supplied Parts

FC-179-002 Wireless Sounder Weather Resistant Kit

4 Fit Small O-Ring

Fit the Small O-Ring (Item 6) to the Sounder / Visual Indicator.

Ensure the O-Ring is spaced evenly around the the lip of the

Sounder / Visual Indicator.

Re-attach the Sounder / Visual Indicator to the Wireless

Module.

5 Attach Sounder

2 Remove Sounder

3 Fit Rubber Plug

Fit the Rubber Plug (item 7) into the cavity on the Sounder

/

Visual Indicator.

Remove the Sounder / Visual Indicator from the Wireless

Module by turning it anticlockwise.

7

8

6

4

5

2

3

1

Part No Product Description

PART DESCRIPTION

1/2 PAN POZI SCREW

PERSPEX MOUNTING PLATE

FLAT WASHER

WIRELESS MODULE (SOLD SEPARATELY)

RUBBER PLUG

SOUNDER VISUAL INDICATOR (SOLD SEPARATELY)

SMALL O-RING (90 MM DIAMETER)

LARGE O-RING (120 MM DIAMETER)

1

2

3

4

5

6

7

8

ITEM NO QTY

3

1

3

1

1

1

1

1

©2019 EMS Ltd. All rights reserved. Page 1 of 2 TSD076 Iss 8 23/09/2019 AJM

6 Remove Mounting Plate

Remove the Mounting Plate by turning it anticlockwise.

7 Remove Screws

8 Fit Large O-Ring

9 Fit Device to Mounting Plate

11 Fix to the Wall

10 Secure Mounting Plate

Remove the three exposed screws. The battery retaining

plate must also be removed.

Fit the Large O-Ring (item 5) to the Perspex Mounting Plate.

Fit the device on to the Perspex Mounting Plate (Item 2) with

the O-Ring between them as shown.

Align the devices and plates screw holes as shown.

Secure the device to the Perspex Mounting Plate using the

washers and screws (items 1 and 3).

Fix the weather resistant sounder securely to the wall using

suitable 4mm countersunk screws as shown.

The rubber plug should be located at the bottom of the

device.

Compatibility For use with FireCell Wireless Sounder and

Visual Indicator Variants.

IP Rating IP55

Dimensions 155mm (Ø) 12mm (D)

Weight 0.25Kg

Specification

Regulatory Information

Manufacturer EMS Ltd. Technology House,

Herne Bay, Kent, CT6 8JZ, United Kingdom

Complies With BS EN 60529:2000

Application Type B: for outdoor use

©2019 EMS Ltd. All rights reserved. Page 2 of 2 TSD076 Iss 8 23/09/2019 AJM

1
2

EMS FireCell Wireless Sounder Weather Resistant Kit Installation guide

Brand: EMS

Model: FireCell Wireless Sounder Weather Resistant Kit

Type: Installation guide

EMS FireCell Wireless Sounder Weather Resistant Kit is a wireless sounder and visual indicator for a fire alarm system with an IP55 rating, making it suitable for outdoor use. It can be used with any FireCell wireless sounder and visual indicator variants. The kit includes a mounting plate, screws, washers, rubber plug, and two O-rings to ensure a secure and weatherproof installation. The rubber plug should be located at the bottom of the device to prevent water ingress. The device has a diameter of 155mm and a depth of 12mm, and weighs 0.25Kg. It complies with BS EN 60529:2000.

Related papers

Other documents