Ikelite Steady Tray Mount Kit for Gamma User manual
- Type
- User manual
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
-
1
-
2
Ikelite Steady Tray Mount Kit for Gamma User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ikelite Quick Release Handle Kit for Gamma User manual
-
-
Ikelite GoPro Mount Kit for DSLR Housing User manual
-
-
-
-
-
-
-
