Ikelite Quick Release Kit for GoPro User manual

Ikelite
Brand
Ikelite
Model
Quick Release Kit for GoPro
Type
User manual
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
A s s e m b l y I n s t r u c t i o n s
2602.3 GoPro Mount Kit
for Quick Release Handle
IKELITE #0184.1
Silicone Lube
1. Apply a thin film of lubricant
to attachment points as
shown below.
2. Press each component
together.
IKELITE #0184.1
Silicone Lube
Attachment Point
Attachment Point
Attach this end to a
Quick Release Handle
(see reverse side)
Attach this end to
to a GoPro Housing
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
2602.3_GoPro_Mnt_Kit_Rel_Han_01-1113
Attach Assembled Kit to Handle
GoPro
1. Depress Handle Push Button.
2. Insert Stem Mount in Handle.
3. Release Push Button. Push
Button should return to
starting position when
assembled kit is properly
attached.
Ikelite
Quick
Release
Handle
(not included
in kit)
Push Button
Stem Mount
  • Page 1 1
  • Page 2 2

Ikelite Quick Release Kit for GoPro User manual

Ikelite
Brand
Ikelite
Model
Quick Release Kit for GoPro
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents