GoPro Mount Kit for DSLR Housing

Ikelite GoPro Mount Kit for DSLR Housing, 2602.5 GoPro User manual

  • Hello! I am an AI chatbot trained to assist you with the Ikelite GoPro Mount Kit for DSLR Housing User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2602.5 GoPro Mount Kit for
DSLR Housing
I n s t r u c t i o n M a n u a l
This mount kit includes a 1-inch ball at DSLR top mount, lightweight
accessory clamp and GoPort tripod mount to attach your GoPro to an
Ikelite DSLR top mount. GoPro camera not
included and not available through Ikelite.
Refer to Diagrams A and B on the opposite
side of this page for installation procedure.
Note: Standard sized 1-inch diameter ball
components are also interchangeable with
the rest of the Ikelite 1-inch ball arm system
components, as well as arms from Ultralight,
Aquatica, Nauticam, and others.
Included in Kit
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
IKELITE
IKELITE
2602.5_GoPro_Mount_Kit_for_DSLR_Housing_1-0215
© 2015 Ikelite Underwater Systems
Installation Procedure
1. Check tightness of GoPro Mount on Ball Mount. Attach and
tighten Mount Kit securely to DSLR Housing as shown using a
flathead screwdriver (not included), Diagram A.
2. Once mounted to the DSLR housing mount, loosen the Wingnut
slightly and rotate the GoPro Mount so it is vertical with the DSLR
Housing, Diagram B. Do not accidentally loosen GoPro Mount on
Ball Mount during positioning of the Mount Kit.
Wingnut
Diagram B
Mount Kit properly attached to
Ikelite DSLR Housing.
Diagram A
Ball
Mount
GoPro
Mount
/