2. Ikelite
  3. Steady Tray Mount Kit for Gamma

Ikelite Steady Tray Mount Kit for Gamma User manual

  • Hello! I am an AI chatbot trained to assist you with the Ikelite Steady Tray Mount Kit for Gamma User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
A s s e m b l y I n s t r u c t i o n s
1887.6 Tray Mount Kit for Gamma
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
See Diagram A - reverse side
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
© 2013 Ikelite Underwater Systems
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
GoPro
Attachment Points
Attach this end
to a Gamma light.
Diagram A
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
IKELITE #0184.1
Silicone Lube
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
1/2” Flex Arm
Extension
Thumb
Screw
Black Nylon Washer
14-20 x 7/8” Screw
Lock
Washer
Nut
Flex
Mount
1/2”-3/4”
Adapter
Tray
Attachment Points
IKELITE #0184.1
Silicone Lube
Mount Strap
/