Installing your O2 Business USB Modem
This modem is TRU-Install
™
enabled, so you don’t need a CD for installation*.
To use it, remove the cap from the end of the modem and insert the SIM card
into the top slot, as shown in the illustration. Then, simply insert the O2 Business
USB Modem into the USB slot and follow the onscreen instructions.
WINDOWS
®
OS
Insert the USB modem into the computer’s USB port. The required drivers
will be installed automatically. Once the drivers have been successfully
installed, a message will pop up on your screen providing you with details
about the software installation as well as the connection settings. Click
connect.
You should now follow the onscreen instructions to complete installation.
You may need to restart your PC once installation is complete.
The O2 Business USB Modem is ready to use.
To access the Help system in 3G Watcher, select Help > Help topics.
MAC 0S
®
X
After you insert the modem, the TRU-Install
™
folder appears. Launch
the Installer package and follow the onscreen instructions to install the
software.
The O2 Business USB Modem is ready to use.
O2 Business USB Modem
SIM card
*Dependent on your company’s IT permissions and policies. Please check with your IT department.