Samsung SNR-1162P User manual

Brand: Samsung

Model: SNR-1162P

Category: Digital Video Recorders (DVR)

Type: User manual

16 Channel DVR

User Manual

SNR-1162

imagine the possibilities

Thanks you for purchasing this Samsung product.

To receive a more complete service, please

www.samsung.com/global/register

02093A-SNR-1162-ENG.indb 102093A-SNR-1162-ENG.indb 1 2008-11-07 오후 2:30:312008-11-07 오후 2:30:31

2_ overview

overview

PRODUCT FEATURES

This digital video recorder (DVR) can connect to up to 16 channels of alarms / sensors and receive a max of 16

channels of camera input. This product can use up to 4 channles from the 16 channles as IP cameras while the

others are used as the conventional analog camera.

It provides the network environment that allows you for external monitoring using the PC and you can use the

backup viewer to create and play backup data personally.

Live mode

- Screen layout selection

- Auto picture switching in the selected screen layout (automatic picture switch)

- Auto event screen popup for event occurrence (event popup)

- Switching to full screen (full screen)

- Custom screen layout setting (user screen setting)

- Picture magniﬁ cation (zoom)

Recording Modes

- Normal recording: records continuously during the period of normal recording schedule.

- Motion recording: records when a motion is detected during the period of motion recording schedule.

- Sensor recording: records when a sensor event occurs during the period of sensor recording schedule.

- Text recording: records when a predetermined text is input in the POS or ATM during the period of text

recording schedule.

Search and Play of Recording

In SURVEILLANCE mode (one channel search)

- Normal search (one channel search): searches for the latest data from the selected channel.

- Date/time search: searches for the recording data of the speciﬁ ed date and time.

- Smart search: searches for motion in a speciﬁ ed area.

- Recording channel map search: searches for recording data, with all channel recording information.

(Searches by selecting a speciﬁ c time frame in the recording map.)

- Text search: searches for recording data, with the text entered during POS recording.

- Event search: searches for recording data, with event information.

In SEARCH mode (multi channel search)

- Date/time search

- Detail search (panorama search): searches for recording data through the panorama view for each channel.

- Smart search

- Recording channel map search

- Text search

- Event search

Picture printing through detail search

Saving recorded picture

- Saving as AVI

- Saving as BMP or JPG

Recording data backup

- Manual backup

- Automatic backup

- Search with backup date (backup viewer)

Remote PTZ camera control

Connection with another DVR through network (server to server connection)

DVR system log information search

System setup

- Custom setup for additional system setting

- Conﬁ guration mode for overall system setup

- Shell mode for system environment setup

•

02093A-SNR-1162-ENG.indb 202093A-SNR-1162-ENG.indb 2 2008-11-07 오후 2:30:402008-11-07 오후 2:30:40

English _3

 OVERVIEW

SAFETY REGULATIONS

Important Safety Instructions

Read these operating instructions carefully before using the unit.

Follow all the safety instructions listed below.

Keep these operating instructions handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including ampliﬁ ers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. if the provided plug does not

ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁ ed by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table speciﬁ ed by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of

time.

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

10)

11)

12)

13)

14)

02093A-SNR-1162-ENG.indb 302093A-SNR-1162-ENG.indb 3 2008-11-07 오후 2:30:412008-11-07 오후 2:30:41

4_ overview

overview

BEFORE START

This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection

to other equipment, menu setup, and the like.

You have to keep in mind the following notices:

SEC retains the copyright on this manual.

This manual cannot be copied without SEC’s prior written approval.

We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of

instructions mentioned in this manual.

If you want to open the case of your system for checking problems, please consult the expert from the shop

where you bought the product.

You may download open source codes from the following website: www.samsungsecurity.com.

Before installing any external device such as external memory or HDD, please check the compatibility of the

device with Samsung DVR. The list of the compatible devices with Samsung DVR can be obtained from your

vendor.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be

placed on the apparatus.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

•

02093A-SNR-1162-ENG.indb 402093A-SNR-1162-ENG.indb 4 2008-11-07 오후 2:30:422008-11-07 오후 2:30:42

English _5

 OVERVIEW

WARNING

Battery

Exchanging a wrong battery in your product may cause an explosion. Therefore you must use the same type of

battery as the one being used in the product.

The following are the speciﬁ cations of the battery you are using now.

Normal voltage: 3V

Normal capacity: 170mAh

Continuous standard load: 0.2mA

Operating temperature: -20°C ~ +85°C

(-4°F ~ +185°F)

The rechargeable battery incorporated in this product is not user replaceable.

For information on its replacement, please contact your service provider.

System Shutdown

Turning off the power while the product is in operation, or taking not permitted actions may cause damage to the

hard drive or the product. Also it can cause a dysfunction to the hard disk while using the product. Please turn off

the power using the Power button on the front of your DVR. After selecting OK in the pop-up menu, you can pull

off the power cord.

You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected

power stoppage. (Any questions concerning UPS, consult your UPS retailer.)

Operating Temperature

The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F).

This product may not work properly if you run right after a long period of storage at a temperature below the

guaranteed one.

When using the device after a long period of storage at low temperature, place the product at room temperature for

a while and run it.

Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C

(41°F ~ 131°F). Likewise, the hard drive may not work at a temperature below the guaranteed one.

STANDARDS APPROVALS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

•

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide)

Lithium coin cells in the product sold or distributed ONLY in California USA.

“Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

02093A-SNR-1162-ENG.indb 502093A-SNR-1162-ENG.indb 5 2008-11-07 오후 2:30:422008-11-07 오후 2:30:42

6_ overview

overview

OVERVIEW

2 Product Features

3 Safety Regulations

4 Before Start

5 Warning

5 Standards Approvals

6 Contents

8 Package Contents

9 Front View and Function Descriptions

10 Back View and Function Descriptions

INSTALLATION

11 Installation Precautions

11 Checking Installation Environment

12 Connecting with Other Devices

GETTING STARTED

13 Starting and Shutting Down the System

14 Logging In and Out

15 Live Screen Main Mode Buttons

SURVEILLANCE MODE

16 Surveillance (Live) Mode Screen Layout

17 Camera Information Panel

19 Screen Information Display

20 Setting Screen Layout

24 Controlling a Remote PTZ Camera

27 Controlling Zoom/Audio

28 Status Display Bar

29 One Channel Search

CONTENTS

SEARCH MODE

31 Search Mode Screen Layout

33 Search Panel Layout and Functions

34 Detail Search

35 Smart Search

36 Map Search

37 Text Search

39 Event Search

40 Search with Date/Time

41 Backup Search

02093A-SNR-1162-ENG.indb 602093A-SNR-1162-ENG.indb 6 2008-11-07 오후 2:30:432008-11-07 오후 2:30:43

English _7

 OVERVIEW

CONFIGURATION MODE

42 Conﬁ guration Mode Screen Layout

43 Camera Setup

50 Schedule Setup

53 Alarm Sensor Setup

55 Communication Setup

58 User/Password Setup

61 System Setup

67 Text Setup

71 Shell Mode

72 Conﬁ guration Settings

75 Log Viewer

CUSTOM SETUP MODE

76 Custom Setup Mode

79 Server to Server

BACKUP

85 Data Backup

PRINTING

87 Saving Recording Screen

89 Printing Recording Screen

ENDING

90 Logout / Shutdown

APPENDIX

91 Product View

92 Troubleshooting (FAQ)

106 Product Speciﬁ cations

02093A-SNR-1162-ENG.indb 702093A-SNR-1162-ENG.indb 7 2008-11-07 오후 2:30:442008-11-07 오후 2:30:44

8_ overview

overview

PACKAGE CONTENTS

USB

DVR User manual Keyboard

Power cord Mouse Program CD

Rack mount ﬁ xing screw and handle HDD ﬁ xing screw Audio cable

RJ-11 cable

02093A-SNR-1162-ENG.indb 802093A-SNR-1162-ENG.indb 8 2008-11-07 오후 2:30:452008-11-07 오후 2:30:45

English _9

 OVERVIEW

FRONT VIEW AND FUNCTION DESCRIPTIONS

Name Functional description

Power LED Shows if the power is on or off.

HDD LED Shows HDD access operations.

HDD Rack Additional 3.5inch SATA 1 or 2 HDD can be installed here.

CD/DVD drive Enables reading CD/DVD media.

CD/DVD LED

Shows CD/DVD access operations.

CD/DVD eject button Used to eject a CD/DVD from the drive.

USB ports (2.0) Used to connect USB devices.

Front side lock Locks the cover to prevent access of unauthorized persons.

Power switch Used to turn the power on.

Front side cover Protects the menu button of the product.

Vents Used to circulate air inside the product.

USB

1 2 3

7891011

02093A-SNR-1162-ENG.indb 902093A-SNR-1162-ENG.indb 9 2008-11-07 오후 2:30:472008-11-07 오후 2:30:47

10_ overview

overview

BACK VIEW AND FUNCTION DESCRIPTIONS

Name Functional description

Camera IN/OUT ports Connect the camera input/output signal cables here.

Sensor alarm ports Connect the sensor and alarm cables here.

Audio IN Port Used to connect audio input to the DVR.

RJ-45 network port Used to connect network cable here.

Line In / Line Out This is an audio input or output port.

MIC IN Port

Connect the microphone to the port.

MON1 and MON2 ports These are camera surveillance picture analog output ports.

USB Ports (2.0) Used to connect USB devices.

VGA port (VGA monitor port) Used to connect a monitor.

COM1 serial port Used to connect an external device with serial interface.

Mouse and keyboard (PS2)

ports

Connect the mouse and keyboard here.

RS-485 port Connect a PTZ camera here.

Power socket Connect the power cord here.

Power switch Used to turn the power on or off.

9101112

02093A-SNR-1162-ENG.indb 1002093A-SNR-1162-ENG.indb 10 2008-11-07 오후 2:30:492008-11-07 오후 2:30:49

English _11

 INSTALLATION

INSTALLATION PRECAUTIONS

- Make sure to turn the product off before installation.

- Avoid strong impact or vibration because it may damage the product.

- Do not install in a place exposed to strong electromagnetic ﬁ elds, or near a radio device such as a radio, TV etc.

- Keep the installation place clean when and after installing the product so that there is no dust.

- Install the product on an open, ﬂ at surface and maintain an appropriate temperature.

In addition, keep the system at least 15 cm away from the wall.

- Take care not to allow a conductive object to fall into the vents.

- Install the system in a cool place out of direct sunlight and keep the devices and tools away from an aisle so as to

prevent possible injury.

- If when using the system that generates smoke, it may cause a ﬁ re or an electric shock. In this case, turn the

system off using the power switch and contact your system provider to request technical support.

- Carefully examine possible causes of faults such as damp ﬂ oor, power extension cable without ground, worn-out

power cord, no safe ground, and so on.

CHECKING INSTALLATION ENVIRONMENT

Check installation environment for safe use of the system.

This system can be installed on a ﬂ at table.

This system must be installed horizontally. Do not stand it vertically or diagonally.

The location of the main body and the power outlet is very important for proper operation of the system.

The system may not work properly in a place where the equipment is too close, or with poor ventilation due to lack

of a ventilation system. And the system maintenance can be challenged in an environment where the system could

harly be accessed.

To prevent trouble with the system and to prevent cases when the system is shutdown by operation environment,

ventilate the air in the system installation place and ﬁ x the system cover ﬁ rmly. Since there are high-voltage parts

inside the system, do not open the cover.

Use this system in the following operation environment where constant temperature and humidity is maintained.

- Operation temperature: 5°C to 40°C

- Operation humidity: 20% to 95% RH

- Ventilation: the front intake vents and the back exhaust vents should not blocked.

installation

02093A-SNR-1162-ENG.indb 1102093A-SNR-1162-ENG.indb 11 2008-11-07 오후 2:30:512008-11-07 오후 2:30:51

12_ installation

installation

CONNECTING WITH OTHER DEVICES

Connecting Sensors and Alarms

Connect one of the two lines from the sensor to the ground (G)

and connect the other line to one of the corresponding sensor

ports.

Connect one of the two lines from the alarm to the ground (C)

and connect the other line to one of the corresponding alarm

ports.

02093A-SNR-1162-ENG.indb 1202093A-SNR-1162-ENG.indb 12 2008-11-07 오후 2:30:522008-11-07 오후 2:30:52

English _13

 GETTING STARTED

getting started

STARTING AND SHUTTING DOWN THE SYSTEM

Starting the System

Open the front cover and press and hold the DVR power

switch for 1 or 2 seconds.

The system is turned on and the DVR program loading screen

appears.

If the program loading is completed, the live screen of the

guest level appears. (Live Mode)

Shutting Down the System

You can shutdown the system only when you have logged in with <Admin>

account.

Click the <Exit> mode button.

The <Exit> button can be clicked only when you have logged in with

<Admin> account.

Enter the <Admin> password in the password input window.

You can enter a password using the numeric keyboard on

the screen or the numeric keys of the keyboard.

Click <OK>.

The DVR live screen disappears and the system is shutdown

within approximately 15 seconds.

You can also shutdown the system in <Conﬁ guration>-<Go

To Shell>.

Reset: deletes all the entered digits.

Del: deletes the last entered digit.

•

02093A-SNR-1162-ENG.indb 1302093A-SNR-1162-ENG.indb 13 2008-11-07 오후 2:31:032008-11-07 오후 2:31:03

14_ getting started

getting started

LOGGING IN AND OUT

Logging In

This system allows logging into the system in two modes by default factory setting.

When you log in for the ﬁ rst time, log in as <Admin>, administrator mode.

Admin mode (administrator) : <Admin> user has the highest privilege in the system.

Initial password of <Admin> account is <4321>.

Guest mode (guest) : initial default mode. <Guest> can monitor the live screen and change screen layout only.

You can set up the privilege of the <Guest> mode in <Conﬁ guration>-

<User/Password>. ► Page 58

The <Guest> mode is the default mode and you don’t have to enter a password for

this mode.

You can register a user, and set up password and privilege for users in <Conﬁ guration>-<User/Password>.

For security purposes, change the password of <Admin> when you have logged in for the ﬁ rst time.

In <Live Mode>, you can log into the system with another user account.

Click the <Login/Logout> mode button from among the main mode

buttons.

Select a user account.

Click the dropdown menu button. Registered users will be

listed.

Select the user account you wish to log into the system with.

Logging Out

In <Live Mode>, you can log out the current user account.

Click the <Login/Logout> mode button from among the main mode

buttons.

Enter the password of the current account.

You can enter a password using either the mouse or the

numeric keys of the keyboard.

Reset: deletes all the entered digits.

Del: deletes the last entered digit.

Click <OK>.

You are logged out from the selected user mode.



•

02093A-SNR-1162-ENG.indb 1402093A-SNR-1162-ENG.indb 14 2008-11-07 오후 2:31:042008-11-07 오후 2:31:04

English _15

 GETTING STARTED

LIVE SCREEN MAIN MODE BUTTONS

Icon Name Functional description

Surveillance Screen

You can monitor sites in real-time, search for a channel, change screen layout and

control PTZ.

Search Screen

You can search for multiple channels, save pictures as JPG, BMP and AVI format and

search for recording data in multiple methods.

Search - detail search, smart search, map search, text search and event search

are available.

Setup Screen

You can change DVR settings and move to shell mode.

Setup - camera, schedule, alarm, communication, user/password, system, and text

setup are available.

Backup Screen

(manual backup)

You can manually backup recording data onto a CD-ROM, DVD, or removable HDD.

AVI, BMP and JPG

Save Screen

You can save a found picture as AVI or BMP/JPG ﬁ le.

(The JPG, BMP and AVI save screen is available in search mode only.)

Print Screen

You can print a found picture.

(The print screen is available in search mode only.)

Etc

You can set up external monitor and connection with another DVR.

You can log in or out.

System off

You can shutdown the system.

02093A-SNR-1162-ENG.indb 1502093A-SNR-1162-ENG.indb 15 2008-11-07 오후 2:31:052008-11-07 오후 2:31:05

16_ surveillance mode

surveillance mode

SURVEILLANCE (LIVE) MODE SCREEN LAYOUT

SURVEILLANCE (Live) mode screen is the default screen that appears when you log into the system. In this screen,

you can monitor, control PTZ and search for a channel.

Main Mode Buttons

Refer to the descriptions in <Live Screen Main Mode Buttons> section.

► Page 15

Camera Information

Shows camera, sensor, audio, alarm, and DVR server information.

Screen Layout Buttons

Screen Information Display

Shows information including camera name, recording status and zoom setting on the SURVEILLANCE (live)

mode screen.

If no camera is connected, different message is displayed depending on the camera type.

• CCD: “No video signal”

• Network: “Disconnection”

• None: The logo will be displayed.

Remote PTZ control

If you switch a PTZ protocol-set camera to one channel screen layout, the PTZ control menu will appear.

Zoom / Audio Volume Control

You can zoom in or out the picture through the zoom level bar in one channel screen layout.

When the audio output is set to <On>, you can control the volume with the mouse.

One Channel Search Control

You can also search for one channel in the SURVEILLANCE (live) mode screen.

If you click the <One channel search> button, you can use smart search, map search, text search and event

search.

Search Screen information display bar

Status Display Bar

The status bar shows HDD usage, another DVR connection status, backup status, network connection status,

time of the oldest recording data, login user, and the current time.



4 5

02093A-SNR-1162-ENG.indb 1602093A-SNR-1162-ENG.indb 16 2008-11-07 오후 2:31:062008-11-07 오후 2:31:06

English _17

 SURVEILLANCE MODE

CAMERA INFORMATION PANEL

Shows all channel and camera information in tree structure.

Camera information folder

Displays information about the connected cameras.

➀ Camera No.

➁ Camera name

➂ Resolution

➃ Protocol

External monitor setting /<Sensor> folder

External monitor

Outputs the picture from the camera to an external monitor (Spot)

connected to the DVR.

If you right-click over a camera No., the <External Monitor>

setting window will appear.

Select or deselect <External Monitor> according to your needs.

You have to select <Etc> - <External Monitor Setting> - <Fixed Mode>

to set up the <External Monitor> described above.

Default setting shows the picture from camera No. 1 on the external monitor.

You cannot set up external monitor for a network camera.

Sensor folder

Shows the connected sensors (alarm inputs) in the order of the sensor number.

If the sensor is working, the icon will be displayed in red.

Digital OUT folder

Shows the connected D/O (alarm output) devices in the order of the

alarm number.

➀ Right-click over an alarm number.

➁ The Alarm output On/Off window will appear.

If the alarm output status is <On>, the icon will be displayed in

red.

Audio folder

Shows the audio devices in the order of the audio number.

➀ Right-click over an audio number.

➁ The audio On/Off window will appear.

If the audio output status is <On>, the icon will be displayed in red.

•



•

①

③

②

④

02093A-SNR-1162-ENG.indb 1702093A-SNR-1162-ENG.indb 17 2008-11-07 오후 2:31:072008-11-07 오후 2:31:07

18_ surveillance mode

surveillance mode

DVR Server Folder

Shows information on another DVR server connected to the current

DVR.

➀ Right-click over <DVR Server>.

➁ Context-sensitive pop-up menu appears.

connection list.

Disconnect all server: disconnects all the connected DVR

servers.

You can also register a DVR server in <Custom Setup>-<Server to Server>-<Registering a DVR

server>.

► Page 79

Operating DVR Server

If you click <DVR Server>, the registered DVR servers will be listed.

➀ Click <DVR Server>.

➁ The registered DVR servers are listed.

➂ Right-click over a desired DVR server item.

➃ Context-sensitive pop-up menu appears.

Connect to server: connects to the selected DVR server.

Disconnect server: disconnects the selected DVR server.

If a DVR server is connected, connected DVR server will turn to red.

•

02093A-SNR-1162-ENG.indb 1802093A-SNR-1162-ENG.indb 18 2008-11-07 오후 2:31:082008-11-07 오후 2:31:08

English _19

 SURVEILLANCE MODE

SCREEN INFORMATION DISPLAY

Shows picture from the connected camera in the SURVEILLANCE (live) screen.

Shows information in each channel screen.

Camera Name

Shows the camera name set in <Conﬁ guration> - <Camera name>.

Default values: CAM01 ~ CAM16

Zoom

Only one channel screen layout shows zoom level.

Select a zoom level using the zoom control bars.

Recording Status

Shows the current recording status.

- NOR: Normal recording

- MOT: Motion recording

- SEN: Sensor recording

- TXT: Text recording

- M/S: Motion/sensor recording

- M/T: Motion/text recording

- S/T: Sensor/text recording

- M/S/T: Motion/sensor/text recording

- +A: Audio recording

Motion, sensor and text recordings have priority over normal recording.

You can set normal recording, motion recording, sensor recording, and text recording in <Conﬁ guration> - <Schedule>.

You can set pre-recording in <Conﬁ guration> - <Camera> - <Pre Rec>.

You can set audio recording in <Conﬁ guration> - <Camera> - <Audio>.



One channel screen layout

321

Multi channel screen layout

02093A-SNR-1162-ENG.indb 1902093A-SNR-1162-ENG.indb 19 2008-11-07 오후 2:31:092008-11-07 오후 2:31:09

20_ surveillance mode

surveillance mode

SETTING SCREEN LAYOUT

You can change screen layout using the screen layout button.

The currently selected screen layout button is displayed in purple.

To Set Screen Layout

You can select one of 8 screen layouts.

Pictures are displayed in the layout in the order of camera number.

1 Channel (1X1) 4 Channels (2X2)

9 Channels (3X3) 16 Channels (4X4)

8 Channels (main 1 + sub 7) 13 Channels (main 1 + sub 12)

10 Channels (main 2 + sub 8) 7 Channels (main 3 + sub 4)

02093A-SNR-1162-ENG.indb 2002093A-SNR-1162-ENG.indb 20 2008-11-07 오후 2:31:102008-11-07 오후 2:31:10

Page is loading ...

Samsung SNR-1162P User manual

Brand: Samsung

Model: SNR-1162P

Category: Digital Video Recorders (DVR)

Type: User manual

Download PDF

report

Samsung SNR-1162P User manual

Samsung SNR-1162P User manual

Related papers

Other documents