Panasonic CZCSWKC2 Operating instructions

Brand: Panasonic

Model: CZCSWKC2

Type: Operating instructions

Air Conditioning Intelligent

Management System

CZ-CSWKC2

Système intelligent de gestion de

la climatisation

Klimaanlagen Intelligentes

Verteilungssystem

Sistema di gestione intelligente

per impianti di condizionamento

Sistema de Gestão Inteligente de

Ar Condicionado

Sistema de gestión inteligente

del aire acondicionado

• After reading it, store it, in a convenient location for easy reference.

• Après l'avoir lu, rangez-le en lieu sûr aﬁn de pouvoir vous y reporter facilement.

• Bewahren Sie sie danach an einem Ort auf, an dem Sie schnell auf sie zugreifen können.

• Dopo la lettura, conservarlo in una posizione comoda per farvi riferimento facilmente.

• Depois de o ler, guarde-o num local conveniente para fácil consulta.

• Tras leerlo, almacénelo en un lugar accesible para facilitar su consulta.

Basic Software

Logiciel de base

Basis-Software

Software di base

Software básico

Operation Manual

Manuel d'instructions

Betriebsanleitung

Manuale d’uso

Manual de Operação

Manual de funcionamiento

CZ-CSWKC2

Authorized representative in EU

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Printed in Japan

85464609111001

CV6233219387

Operation Manual

Air Conditioning

Intelligent Management System

CZ-CSWKC2

Thank you for purchasing our monitoring and con-

trol system.

Before using the system, be sure to read this

manual carefully. After reading it, store it, in a con-

venient location for easy reference.

Basic Software

Contents

Precautions on Using This Product ........................i

1. Features of the System ......................................1

2. Startup and exit ..................................................2

3. Quick Reference ..................................................3

4. Using the System ...............................................4

5. Supplementary Information ............................82

6. License Certiﬁcation .........................................85

7. Basic Software Installation ..............................88

8. Troubleshooting ...............................................91

9. Afterservice .......................................................92

Operation Manual

Air Conditioning

Intelligent Management System

CZ-CSWKC2

Basic Software

Contents

Precautions on Using This Product .....................................................................................i

1. Features of the System ................................................................................................1

1-1. Introduction .................................................................................................................................1

1-2. System Features ..........................................................................................................................1

2. Startup and exit ............................................................................................................2

2-1. Startup .........................................................................................................................................2

2-2. Exit ................................................................................................................................................2

3. Quick Reference ............................................................................................................3

4. Using the System .........................................................................................................4

4-1. Common Items ............................................................................................................................4

4-1-1. The Menu Bar .....................................................................................................................4

4-2. Warning information display list box ........................................................................................7

4-3. Calendar .......................................................................................................................................7

4-4. Password .....................................................................................................................................8

4-5. Procedure .....................................................................................................................................8

4-6. Print ..............................................................................................................................................9

4-6-1. Print screen .........................................................................................................................9

4-6-2. Excel output ........................................................................................................................9

4-6-3. Settings for automatic Excel output................................................................................ 10

4-6-3-1. Settings for saving the Operation/status log .............................................................. 10

4-6-3-2. Settings for saving the alarm log ................................................................................ 11

4-6-3-3. Changing the folder in which CSV ﬁles are created for automatic Excel output ......... 11

4-6-3-4. Registering settings .................................................................................................... 11

4-6-3-5. Deleting settings ........................................................................................................ 11

4-6-3-6. Deleting ...................................................................................................................... 11

4-6-3-7. Troubleshooting if saving does not work .................................................................... 12

4-7. Status/Operation .......................................................................................................................13

4-7-1. Display method .................................................................................................................14

4-7-1-1. Selecting displayed ﬂoor and area .............................................................................. 14

4-7-1-2. Displaying alarms........................................................................................................ 14

4-7-1-3. Displaying sub units .................................................................................................. 15

4-7-1-4. Sorting lists ................................................................................................................. 15

4-7-2. Start and stop control method ........................................................................................15

4-7-2-1. Indoor unit selection method ..................................................................................... 15

4-7-2-2. Start and stop operation method (for each indoor unit) .............................................. 16

4-7-2-2-1. On/Off .............................................................................................................. 16

4-7-2-2-2. Mode switch .................................................................................................... 16

4-7-2-2-3. Fan speed switch ............................................................................................. 17

4-7-2-2-4. Swing/Flap ....................................................................................................... 17

4-7-2-2-5. Prohibition switch ............................................................................................ 17

4-7-2-2-6. Temperature setting ......................................................................................... 17

4-7-2-2-7. Transmit ...........................................................................................................18

4-7-2-2-8. Deleting ...........................................................................................................18

4-7-2-3. On and Off operation method (Each group) ................................................................ 18

4-8. Filter

Indoor Unit Information ................................................................................................. 19

4-8-1. Display method .................................................................................................................21

4-8-1-1. Selecting displayed ﬂoor and area ..............................................................................21

4-8-1-2. Sorting lists .................................................................................................................21

4-8-2. Control method .................................................................................................................21

4-8-2-1. Indoor unit selection method .....................................................................................21

4-8-2-2. Clearing ﬁlter signs .....................................................................................................22

4-8-2-3. Clearing operation time ..............................................................................................22

4-8-2-4. Canceling and setting demand ...................................................................................23

4-9. Outdoor unit information .........................................................................................................24

4-9-1. Display ...............................................................................................................................25

4-9-1-1. Oil check sign .............................................................................................................25

4-9-1-2. Power output ..............................................................................................................25

4-9-2. Demand setting ................................................................................................................26

4-9-2-1. Outdoor unit selection ................................................................................................26

4-9-2-2. Setting demand values ...............................................................................................26

4-10. Control/Status Change History ................................................................................................27

4-10-1. Display method .................................................................................................................28

4-10-1-1. Displaying control history ...........................................................................................28

4-10-1-2. Displaying status change history ................................................................................28

4-10-1-3. Display time range speciﬁcation method ...................................................................28

4-10-2. Printing ..............................................................................................................................30

4-10-2-1. Excel output ...............................................................................................................30

4-11. Alarm list & alarm log ...............................................................................................................31

4-11-1. Alarm list ...........................................................................................................................31

4-11-1-1. Display method ..........................................................................................................31

4-11-1-2. Excel output ...............................................................................................................32

4-11-2

Alarm log...........................................................................................................................33

4-11-2-1. Display method ..........................................................................................................34

4-11-2-2. Reﬁning the displayed data ........................................................................................34

4-11-2-3. Display range term speciﬁcation method ...................................................................34

4-11-2-4. Alarm conﬁrmation .....................................................................................................35

4-11-2-5. Print screen ............................................................................................................. 36

4-11-2-6. Excel output ...............................................................................................................36

4-11-2-7. Settings for automatic Excel output ...........................................................................36

4-12. Schedule/Results .......................................................................................................................37

4-12-1. Display method .................................................................................................................38

4-12-1-1. Selecting displayed ﬂoor and area ..............................................................................38

4-12-1-2. Sort lists .....................................................................................................................38

4-12-1-3. Display time range speciﬁcation method ...................................................................38

4-12-2. Detailed display of schedule time ...................................................................................39

4-13. Mode setting (calendar) ............................................................................................................40

4-13-1. Display method .................................................................................................................40

4-13-1-1. Calendar display .........................................................................................................40

4-13-2. Calendar operation ...........................................................................................................40

4-13-2-1. Registering holidays on the calendar ..........................................................................40

4-13-3. Registering mode settings ...............................................................................................41

4-13-3-1. Registering modes to the calendar.............................................................................41

4-13-3-2. Deleting modes from the calendar .............................................................................41

4-13-3-3. Registering an edited calendar ...................................................................................42

4-13-3-4. Registering in day-of-the-week units ..........................................................................42

4-13-4. Mode comment operation ...............................................................................................43

4-13-4-1. Registering mode comments .....................................................................................43

4-13-5. Change conﬁrmation ........................................................................................................43

4-14. Schedule Operation Time Setting ............................................................................................44

4-14-1. Registering schedule times ..............................................................................................45

4-14-1-1. Mode selection ...........................................................................................................45

4-14-1-2. Setting schedule times ...............................................................................................46

4-14-1-3. Conﬁrming schedule time settings .............................................................................47

4-14-2. Edit function ......................................................................................................................47

4-14-2-1. Editing schedule times ...............................................................................................47

4-14-3. Saving changed data ........................................................................................................48

4-14-4. Change conﬁrmation ........................................................................................................48

4-15. Schedule Changes .....................................................................................................................49

4-15-1. Display method .................................................................................................................50

4-15-2. Registering schedule times ..............................................................................................51

4-15-2-1. Setting schedule times ...............................................................................................51

4-15-2-2. Conﬁrming schedule time settings .............................................................................52

4-15-3. Edit function ......................................................................................................................52

4-15-3-1. Editing schedule times ...............................................................................................52

4-15-4. Saving changed data ........................................................................................................53

4-15-5. Change conﬁrmation ........................................................................................................53

4-16. Register Maintenance Information ..........................................................................................54

4-16-1. Display method .................................................................................................................55

4-16-1-1. Selecting displayed ﬂoor and area ..............................................................................55

4-16-2. Maintenance settings .......................................................................................................55

4-16-2-1. Maintenance settings .................................................................................................55

4-16-2-2. Cancel maintenance ...................................................................................................55

4-16-2-3. Registering changed data ...........................................................................................55

4-16-2-4. Deleting settings ........................................................................................................55

4-16-3. Change conﬁrmation ........................................................................................................55

4-17. Floor Name Registration ..........................................................................................................56

4-17-1. Display method .................................................................................................................57

4-17-1-1. Conﬁrmation of indoor units included in each ﬂoor ....................................................57

4-17-2. Floor registration ..............................................................................................................57

4-17-2-1. Changing ﬂoor names ................................................................................................57

4-17-2-2. Enable/disable settings ...............................................................................................57

4-17-2-3 Level setting ...............................................................................................................57

4-17-2-4. Main No. setting .........................................................................................................57

4-17-2-5. Registering changed data ...........................................................................................58

4-17-2-6. Deleting settings ........................................................................................................58

4-17-3. Change conﬁrmation ........................................................................................................58

4-18. Register control group name ...................................................................................................59

4-18-1. Display method .................................................................................................................60

4-18-1-1. Conﬁrmation of indoor units included in control group ..............................................60

4-18-2. Registering control groups ..............................................................................................60

4-18-2-1. Changing control group names ..................................................................................60

4-18-2-2. Enable/disable settings ...............................................................................................60

4-18-2-3. Registering changed data ...........................................................................................60

4-18-2-4. Deleting settings ........................................................................................................60

4-18-3. Change conﬁrmation ........................................................................................................60

4-19. Register Schedule Group Names .............................................................................................61

4-19-1. Display method .................................................................................................................62

4-19-1-1. Conﬁrmation of indoor units included in each schedule group ...................................62

4-19-2. Registering schedule groups ...........................................................................................62

4-19-2-1. Changing schedule group names ...............................................................................62

4-19-2-2. Enable/disable settings ...............................................................................................62

4-19-2-3. Registering changed data ...........................................................................................62

4-19-2-4. Deleting settings ........................................................................................................62

4-19-3. Change conﬁrmation ........................................................................................................62

4-20. Register operator information .................................................................................................63

4-20-1. Registering operators .......................................................................................................63

4-20-1-1. Changing operator names ..........................................................................................63

4-20-1-2. Enable/disable settings ...............................................................................................63

4-20-1-3. Registering changed data ...........................................................................................64

4-20-1-4. Deleting settings ........................................................................................................64

4-20-2. Change conﬁrmation ........................................................................................................64

4-21. R/C prohibition settings ............................................................................................................65

4-21-1. Control method .................................................................................................................66

4-21-1-1. Changing prohibition settings (affects prohibit 1 – 4)..................................................66

4-21-1-2. Initializing prohibition settings ....................................................................................66

4-21-1-3. Registering settings ....................................................................................................66

4-21-1-4. Deleting settings ........................................................................................................66

4-21-1-5. Close the screen ........................................................................................................66

4-22. Clock setting ..............................................................................................................................67

4-22-1. Clock setting method ........................................................................................................67

4-22-2. Setting ...............................................................................................................................67

4-23. Data backup and restoration ....................................................................................................68

4-23-1. Data backup.......................................................................................................................68

4-23-1-1. Starting data backup ...................................................................................................68

4-23-1-2. Deleting ......................................................................................................................69

4-23-1-3. Changing the save destination ...................................................................................69

4-23-2. Data restoration ................................................................................................................69

4-23-2-1. Start data restoration ..................................................................................................70

4-23-2-1-1. Starting data restoration ..................................................................................70

4-23-2-1-2. Canceling data restoration ...............................................................................70

4-23-2-1-3. Re-specifying the data restoration ﬁle .............................................................70

4-23-3. Canceling data restoration ...............................................................................................71

4-23-3-1. Starting cancellation of data restoration .....................................................................71

4-23-4. Automatic backup settings ..............................................................................................72

4-23-4-1. Enable/disable automatic backup ...............................................................................72

4-23-4-2. Setting the maximum storage term ...........................................................................73

4-23-4-3. Changing the backup creation folder ..........................................................................73

4-23-4-4. Registering settings ....................................................................................................73

4-23-4-5. Deleting settings ........................................................................................................73

4-23-4-6. Deleting ......................................................................................................................73

4-23-4-7. Troubleshooting if saving does not work .................................................................... 74

4-24. Register Event ...........................................................................................................................75

4-24-1. Display method .................................................................................................................75

4-24-1-1. Event group display ....................................................................................................75

4-24-2. Registering event groups .................................................................................................76

4-24-2-1. Changing event group names ..................................................................................... 76

4-24-2-2. Changing the input point ............................................................................................ 76

4-24-2-3. Changing status .......................................................................................................... 76

4-24-2-4. Changing the output point .......................................................................................... 76

4-24-2-5. Changing output ......................................................................................................... 76

4-24-2-6. Setting judgment conditions .......................................................................................77

4-24-2-7. Changing output delay time .......................................................................................77

4-24-2-8. Registering changed data ...........................................................................................77

4-24-2-9. Deleting settings ........................................................................................................77

4-24-3. Change conﬁrmation ........................................................................................................77

4-25. Register I/D unit upper/low-limit temperature ........................................................................78

4-25-1. Display method .................................................................................................................79

4-25-1-1. Selecting displayed ﬂoor and area ..............................................................................79

4-25-1-2. Sorting lists .................................................................................................................79

4-25-2. Control method .................................................................................................................79

4-25-2-1. Indoor unit selection method .....................................................................................79

4-25-2-2. Setting upper and lower limit temperatures ...............................................................80

4-25-2-3. Enable/disable settings ...............................................................................................80

4-25-3. Saving changed data ........................................................................................................80

4-25-4. Change conﬁrmation ........................................................................................................80

4-26. Exit ..............................................................................................................................................81

5. Supplementary Information ..................................................................................... 82

6. License Certiﬁcation .................................................................................................. 85

7. Basic Software Installation ....................................................................................... 88

8. Troubleshooting ......................................................................................................... 91

9. Afterservice ............................................................................................................... 92

Note

i 1

Precautions on Using This Product

IMPORTANT

· Before you can use the P-AIMS system, you need to ﬁrst perform a work procedure called

"license certiﬁcation."

Please perform the license certiﬁcation referring to "6.License certiﬁcation".

· Duplication of all or part of this software and documentation without the express consent

of the holder of the rights to the above, and transfer of the software to another party, are

prohibited by law.

· This software and manual are not to be reproduced, in whole or in part, without permission.

· In principle, each set of this software is purchased for use on a single computer.

· Please note that we bear no responsibility for any effects resulting from the use of this

software and manual.

Panasonic will not be liable for any claim based on errors in calculations of distribution ratios

and utility usage caused by faults in this equipment or software.

· The speciﬁcations of this software, and the content of this manual, are subject to change

without notice, for the sake of improvement.

· This software is used to calculate distribution ratios and charges according to the load ratios

estimated for each indoor unit.

It is not based on the Measurement Act, so it cannot be used for public transactions and

similar purposes.

· The content of this manual is limited to explanation of how to use this software.

It does not cover the usage methods for the operated machinery and optional features, or for

the OS etc., so refer also to the relevant manuals for those elements.

· The screen image examples presented in this manual are intended to illustrate the

explanation of layouts, and do not represent actual operating conditions. The tenant names

displayed are also ﬁctional.

· Displays and operations may differ from the examples in this manual, depending on versions

of Excel and the OS used.

· Refer to "Please Read Before Use" for the warranty terms for this software.

· Panasonic will not be liable for any violation of the rights of any third party stemming from

use of information in this manual, or for violation of other rights.

· Microsoft, Windows XP and Microsoft Excel are trademarks of Microsoft Corporation in the

United States and other countries.

Other product names are trademarks or registered trademarks of the corresponding

companies.

Other products are copyrights of the corresponding companies.

i 1

1. Features of the System

1-1. Introduction

This Air Conditioning Intelligent Management System (P-AIMS System) is Panasonic

Corporation's personal computer (PC) software for the centralized control of air

conditioning equipment.

Compatible equipment models are:

Electric package air conditioners (PAC)

Gas heat pump (GHP) air conditioners

1-2. System Features

Connectable units .................... 1,024 indoor

960 outdoor

Operation functions ................. Start/ stop, temperature settings, operation mode

switching, airﬂow direction settings, etc.

Operation monitor ................... Layout display (requires layout display software, sold

separately)

Uniﬁed monitoring of operation status (start/stop,

operation mode, alarm)

Alarm log display, status change history display

Filter cleaning signs, engine oil check sign

Program timer .......................... 20 daily times can be set for each group (30 types)

Air conditioning

energy distribution............... Cumulative operation time for each indoor unit, and

total operation count

Calculation of distribution ratios and usage quantities

, kWh) for air conditioning consumption of gas and

electricity by each indoor unit and each tenant

Time zone distribution function (within hours, after

hours, special days)

Processes performed on cut-off days can be changed

at any time (within a year)

(separate charge calculation software is required)

2 3

2. Startup and exit

2-1. Startup

1. Double click on the P-AIMS shortcut on the desktop.

The following window appears:

The system starts up and the Status/Operation screen is displayed.

2-2. Exit

1. From the Menu bar, select “Maintenance” - “Exit”.

2. The Password Input screen is displayed. Input the password.

3. The System Exit screen is displayed. Click on the button.

2 3

3. Quick Reference

Menu List

Main menu

1. Layout

2. List display

3. Schedule

4. Print

5. Distribution ratio

6. Demand

7. BACnet

8. Facility Control

9. Web

10. Maintenance

Sub menu

Status/Operation

Filter sign & I/D unit

information

O/D unit information

Operation/Status change log

Alarm list & alarm log

Schedule/results

Mode settings (Calendar)

Schedule operation time

settings

Update schedule

Print screen

EXCEL output

Auto EXCEL output setting

Print list

List Print preview

Distribution ratio (optional)

Demand (optional)

BACnet (optional)

Facility Control (optional)

p13

p19

p24

p27

p31

p37

p40

p44

p49

p9

p10

1. Layout

information

R/C prohibition settings

Clock settings

Data backup/restore



Data backup



Restore data



Cancel data restore



Auto backup settings

temperature

Auxiliary settings

O/D unit master data settings

I/D unit master data settings

Reset adapter

System maintenance mode

Exit

p54

p56

p59

p61

p63

p65

p67

p68

p69

p71

p72

p75

p78

p81

2. List display

3. Schedule

4. Print

5. Distribution ratio

6. Demand

7. BACnet

8. Facility Control

10. Maintenance

* indicates the security code protection

screen.

Layout (options)

Web (optional)

9. Web

4 5

4. Using the System

4-1. Common Items

The common display area is at the top of the screen, and is always displayed, regardless of which

operation screen is used. Any current alarms and the date and time are also displayed. The menu

bar can be used to move between screens.

4-1-1. The Menu Bar

 Layout .................................... Display the layout. (Optional)

 List display ............................. Display the various list screens.

Status/Operation ................Monitor air conditioner status and

alarms, and perform start and

stop operations etc.

Filter sign & I/D

unit information ..................Check duration and times of

indoor unit operation and reset

ﬁlter alarms.

O/D unit information ..........Check duration and times of

outdoor unit operation and make

power demand settings.

Operation/Status

change log ..........................Display a log of air conditioner

starts and stops, and change

operation status.

Alarm list & alarm log ........Display a log of air conditioner

alarms and restoration status.

Displays the

date and time.

Menus for

various

operations

Displays current

alarms.

Stops the buzzer

when an alarm

is in effect.

Common

Display area

4 5

 Schedule ................................ Display the Schedule setting screen.

Schedule/results .................Monitor air conditioner status and

alarms, and perform start and

stop operations etc.

Mode settings .....................Set the scheduled operation mode

to calendar.

(Calendar)

Schedule operation time

settings

................................Set the scheduled operation times

for each mode.

Update schedule.................Check and change scheduled

operating times for the same day,

next day and day after that.

 Print ........................................ Print data from the screen.

Print screen .........................Print the displayed screen.

EXCEL output......................Export the print image to a

CSV ﬁle that can be loaded by

Microsoft Excel.

Auto EXCEL output

setting

..................................Make settings for automatically

outputting the speciﬁed data to

CSV ﬁles that can be loaded by

Microsoft Excel.

Print list ...............................Print the distribution table.

(Optional)

List print preview...............Display and print the preview

screen for the distribution table.

(Optional)

· Distribution ratio ................... Calculate distribution. (Optional)

· Demand.................................. Control demand. (Optional)

· BACnet .................................. Perform BACnet communications. (Optional)

· Facility Control ...................... Control devices other than the air conditioners.

(Optional)

· Web ........................................ Provide a web browser. (Optional)

· Maintenance .......................... Display the Maintenance screen.

information

...........................Register and cancel indoor unit

maintenance.

name....................................Register control group names.

name....................................Register schedule group names.

information .........................Register names of operators

responsible for checking alarms.

R/C prohibition settings .....Set central control patterns for use

with the remote control unit.

Clock settings......................Set the system time.

Data backup/restore ...........Backup and restore data.

Data backup ...................... Make backups of data.

Restore data .................... Restore back-up data.

Cancel data restore .......... Delete data backups.

Auto backup settings

......... Set how backups are made

automatically.

6 7

control.

limit temperature................Register conditions for the upper

and lower temperature limits for

the indoor unit

Auxiliary settings................Make adapter connection line

settings, system password

settings, etc.

O/D unit master data

settings ................................Register outdoor units to monitor.

I/D unit master data

settings ................................Register indoor units to monitor.

Reset adapter .....................Specify the connection line and

reset the adapter.

System maintenance

mode ...................................Display the system maintenance

mode.

Exit .......................................Exit the system.

· Help ........................................ Display the Help screen.

Basic software manual .......Display the basic software

manual.

Layout display software

manual ................................Display the layout display

software manual. (Optional)

Distribution ratio software

manual

..................................Display the Accounting software

manual. (Optional)

Demand software

manual ................................Display the demand control

software manual. (Optional)

BACnet software manual ...Display the BACnet control

software manual. (Optional)

Facility control software

manual

.................................Display the facility control

software manual. (Optional)

WEB software

manual

........Display the WEB software

manual.

(Optional)

Select Language .................The selected language is

displayed.

Version information ...........Display version information.

6 7

4-2. Warning information display list box

When an alarm is issued in connection with a monitored device, the name of the alarm device

is displayed in the list box in the upper left of the screen, where it ﬂickers in red. Click on the

button on the right side of the list box to display the list of current alarms. If there are many

alarms in effect, an additional scroll bar is displayed on the right side of the list display screen.

Devices which have been restored from their alarms are automatically removed from the list.

A buzzer also sounds when an alarm occurs, but it can be stopped by clicking on the

button.

4-3. Calendar

Click on the button on the right side of the date display column, when specifying time periods

on any screen, to display the calendar screen.

Click on the calendar to select the dates of displayed history items.

The currently displayed calendar year and

month

Click to display the calendar for

the previous month.

Click to display the calendar for

the next month.

Today's

date

The currently selected

date

Click to select the date to display.

Displays today's date. Today's date is selected when this is

clicked.

8 9

4-4. Password

This password screen is displayed if users are restricted, in order to restrict access to screens

such as the Maintenance screen which are not used by general users, and to prevent operation

errors. The password level required for the current input is displayed at the top of the Password

screen. Input a password of a level that meets the level requirement.

Click on the numerical buttons at the bottom to input the correct password. When a correct

password is input, the restriction is lifted and the displays and devices on the screen become

operable. Restrictions are also lifted if the input password is of a level surpassing that which is

displayed.

* There are three levels of password, as follows:

Level 1: It is possible to operate and change the names of password-protected

devices.

Level 2: Operations such as system settings and shutdown are possible.

Level 3: All operations, including system maintenance, are possible.

4-5. Procedure

If [Procedure] is displayed, the procedure for accessing that item is presented.

For example,

[Procedure]

On the menu bar, select “Print” – “Auto EXCEL output setting”.

(Password level 1)

when the above is displayed, clicking on Print on the main menu displays the sub-menu.

Click on “Auto EXCEL output setting” in the sub-menu to switch the screen display to that item.

If there is a <Password Level 1> display, the Password screen (Level 1) is displayed, so the screen

switches after a suitable password is input.

Turns blue when a

correct password are

input.

The input passwords are

displayed as asterisks (*).

Cancel password input.

Deletes one input character

in the password.

Click, then input the

password.

8 9

4-6. Print

4-6-1. Print screen

[Procedure]

On the menu bar, select “Print” – “Print screen”.

Print the currently-displayed screen.

* This menu cannot be selected on screens that cannot be printed.

Click on the button to print the screen.

Click on the button to exit without printing.

4-6-2. Excel output

[Procedure]

On the menu bar, select “Print” – “Excel output”.

Currently displayed data can be saved as a ﬁle in CSV format, which can be displayed by

Microsoft Excel and similar applications. The data currently displayed on the screen becomes the

ﬁle, so make sure the data to place in the ﬁle is displayed on the screen.

The ﬁle name is assigned automatically.

OperationStatus change log 07072009 _ 1113.CSV

Name DDMMYYYY hhmm *This ﬁle is for when the “Operation/

Status change log” is used.

Click on the button to save the ﬁle to the folder speciﬁed under “Save in:”.

Click on the button to exit without saving.

* Unless a different save folder has been speciﬁed, the saved ﬁle is saved to the

folder named Auto_CSV in the folder to which the P-AIMS system was installed

(e.g. C:\P-AIMS).

10 11

4-6-3. Settings for automatic Excel output

[Procedure]

On the menu bar, select “Print” – “Auto EXCEL output setting”.

(Password level 1)

“Operation/Status change log” and “Alarm log” can be saved automatically, every day, in CSV

format, which can be displayed on Microsoft Excel. The timing of data saving is past midnight, so

the data up to the previous day can be checked.

:Specify the ﬁle to save the Operation/Status change log to.

:Specify the ﬁle to save the Alarm log to.

:Specify the ﬁle to save Distribution ratio-related data (Optional) to. This

cannot be speciﬁed with the basic software.

:Registers the set content.

:Reverts to the previously registered content.

:Closes the window.

:Changes the backup creation folder.

4-6-3-1. Settings for saving the Operation/status log

To automatically save the “Operation/Status change log” ﬁle, click on

, and add the check mark. Saving is enabled with the check mark is

added.

Click again to remove the check mark.

The ﬁle name is assigned automatically. (Files are saved in one-day units).

OperationStatus change log 07072009 _ 1.CSV

Name DDMMYYYY serial number

(* The serial number increments to “2” when there are over 60,000 ﬁles with the serial

number “1”. Up to 400,000 ﬁles can be saved per day).

Changes

based on

status

Page is loading ...

Panasonic CZCSWKC2 Operating instructions

Panasonic CZCSWKC2 Operating instructions

Panasonic CZCSWKC2 Operating instructions

Related papers

Other documents