ß WARRANTY INFORMATION
The Watt Stopper
®
, Inc. warranties its products to be free of defects in
materials and workmanship for a period of five years. There are no obligations
or liabilities on the part of The Watt Stopper, Inc. for consequential damages
arising out of or in connection with the use or performance of this product or
other indirect damages with respect to loss of property, revenue, or profit, or
cost of removal, installation or reinstallation.
Putting a Stop to Energy Waste
®
Santa Clara CA 95050 USA ☎ 1(800)879-8585 1(972)578-1699
70-0024-00 6/97
ß SPECIFICATIONS
TW-2 Wall Mount Transmitter:
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . On/Off
Indicator . . . . . . . . . . . . . . . . . . . . . LED confirms operation and battery level
Power Source . . . . . . . . . . . . . . . . . . . . Two AAA alkaline batteries (supplied)
Santa Clara, CA 95050 USA
1(800)879-8585 1(972)578-1699
Installation Instructions
2-Button Wall Mount
Transmitter
Model#:
TW-2
®
ON
OFF
FCC User Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
ß ORDERING INFORMATION
Catalog# Description
TW-2 2-Button Wall Mount Transmitter
Copyright ©1997 by The Watt Stopper
®
, Inc.
ß DESCRIPTION
The TW-2 is a two button, wall mount infrared transmitter. It works with The
Watt Stopper’s Isolé Remote Control System for Lighting. With the push of a
button it can turn lights on or off.
✆ Call 1(800)879-8585 or 1(972)578-1699 For Technical Support ✆
ß BATTERY INSTALLATION
ß MOUNTING
GUIDELINES
The transmitter and receiver cell must be
mounted within 13 ft. of each other, and
must have an unobstructed line-of-sight.
ON
OFF
1
2
3
4
O
F
F
O
N
ß CHANNEL AND GROUP DIALS
Address settings are made by using the
Channel and Group dials on the back of the
transmitter (refer to the “Remote Control
System for Lighting Installation Instructions”).
ß INSTALLATION
CANAL
GROUPE
1
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
12
11
10
9
8
7
6
5
4
3
2
ß CONTROL BUTTONS
Pressing a button on the TW-2 transmitter sends an infrared signal to the receiver
cell which relays the signal to the control module that controls the lights.
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
C
A
N
A
L
G
R
O
U
P
E
3
1
2
Mounting Plate
Removal
Receiver Cell Ceiling
ON
OFF
ON
Lights turn ON
Level unchanged
OFF
Lights turn OFF
Level unchanged
LED
Flashes when button
is pressed indicating
battery level OK
ß WARRANTY INFORMATION
The Watt Stopper
®
, Inc. warranties its products to be free of defects in
materials and workmanship for a period of five years. There are no obligations
or liabilities on the part of The Watt Stopper, Inc. for consequential damages
arising out of or in connection with the use or performance of this product or
other indirect damages with respect to loss of property, revenue, or profit, or
cost of removal, installation or reinstallation.
Putting a Stop to Energy Waste
®
Santa Clara CA 95050 USA ☎ 1(800)879-8585 1(972)578-1699
70-0025-00 6/97
ß SPECIFICATIONS
TW-6 Wall Mount Transmitter:
Controls . . . . . . . . . . . . . . . . . . . . 6 functions: On, Off, Up, Down, Max, Min.
Indicator . . . . . . . . . . . . . . . . . . . . . LED confirms operation and battery level
Power Source . . . . . . . . . . . . . . . . . . . . Two AAA alkaline batteries (supplied)
Santa Clara, CA 95050 USA
1(800)879-8585 1(972)578-1699
Installation Instructions
6-Button Wall Mount
Transmitter
Model#:
TW-6
®
ON UP DOWN
OFF MAX MIN
FCC User Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
ß ORDERING INFORMATION
Catalog# Description
TW-6 6-Button Wall Mount Transmitter
Copyright ©1997 by The Watt Stopper
®
, Inc.
ß DESCRIPTION
The TW-6 is a six button, multi-function wall mount infrared transmitter. It works
with The Watt Stopper’s Isolé Remote Control System for Lighting. With the
push of a button it can turn lights on or off, raise or lower the light level, or
select the minimum or maximum level.
✆ Call 1(800)879-8585 or 1(972)578-1699 For Technical Support ✆
ß BATTERY INSTALLATION
ß MOUNTING
GUIDELINES
The transmitter and receiver cell must be
mounted within 13 ft. of each other, and
must have an unobstructed line-of-sight.
ON UP DOWN
OFF MAX MIN
1
2
3
4
U
P
D
O
W
N
O
F
F
M
IN
M
A
X
O
N
ß CHANNEL AND GROUP DIALS
Address settings are made by using the
Channel and Group dials on the back of the
transmitter (refer to the “Remote Control
System for Lighting Installation Instructions”).
ß INSTALLATION
CANAL
GROUPE
1
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
12
11
10
9
8
7
6
5
4
3
2
ß CONTROL BUTTONS
Pressing a button on the TW-6 transmitter sends an infrared signal to the receiver
cell which relays the signal to the control module that controls the lights.
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
C
A
N
A
L
G
R
O
U
P
E
3
1
2
Mounting Plate
Removal
Receiver Cell Ceiling
ON UP DOWN
OFF MAX MIN
ON
Lights turn ON
Level unchanged
OFF
Lights turn OFF
Level unchanged
UP
Press & Hold
Lights turn ON
Level increases
DOWN
Press & Hold
Lights turn ON
Level decreases
MINIMUM
Lights turn ON
Level set to minimum
(user adjustable, 10% default)
MAXIMUM
Lights turn ON
Level set to maximum
(user adjustable, 100% default)
LED
Flashes when button
is pressed indicating
battery level OK
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Legrand WD2xx Installation guide
-
-
-
-
-
-
-
-
-