Smith Blair Inc 24500023803000 Installation guide

Type
Installation guide
SMITH-BLAIR, INC.
TEXARKANA, AR.
TI-011-97
Sheet 2 of 2
TYPE 245 & 248
REDI-CLAMP
INSTALLATION INSTRUCTIONS
 Clean pipe surface thoroughly, particularly in area where
gasket will seat.
 Lubricate pipe and face of gasket with a suitable solution.
 Back-off nut, disengage bolt head from lug and open clamp
enough to install on pipe.
 Install on pipe and engage bolt head in lug.
 Center gasket over leak.
 Tighten nut securely to stop leak.
Max. recommended torque: 7/16" bolt - 30 ft. lbs.
3/8" bolt - 25 ft. lbs.
 On clamps having more than one bolt, tighten uniformly and
progressively.
THIS PRODUCT DOES NOT RESTRAIN
AXIAL PIPE MOVEMENT
TYPE 245
Questions: Please Call 1-800-643-9705
  • Page 1 1

Smith Blair Inc 24500023803000 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI