Road Armor JK50B, Defender Windshield Light Bar Mounts, JK50D2B, JK50DB Installation guide

Hello! I've reviewed the installation instructions for the Road Armor A-pillar light mounts (JK50, JK50D2). This document outlines the steps to install the mounts on a 2007+ Jeep Wrangler JK, using the vehicle's factory hardware. I am here to assist you with any questions you may have about these instructions or installation process.
What tools are required for installation?

Does this product use additional hardware?

Which vehicle is the mount compatible with?

Page(1of6)

INSTALLINSTRUCTIONS

JeepJKA‐PillarLightMounts

Product:JK50,JK50D2,JK50D2

Applicaon:2007+JeepWranglerJK

(2Doorand4Door)

Page(2of6)

2007+JeepWranglerA‐PillarLightMountsPage(2of3)



SAFETYFIRST!

 FOLLOWALLINSTRUCTIONS,YOURSAFETYANDTHESAFETYOFOTHERSISMOSTIMPORTANT.

 WEARAPPROPRIATEEYEPROTECTIONANDEXERCISECAUTIONWHENDRILL‐

ING/CUTTING

REQUIREDTOOLS





INCLUDEDHARDWARE

IWARNING

Readtheinstruconscompletelybeforebeginninginstallaon.Beforeghteningbolts,

drillingorcungwhererequired,checktomakesuretherearenoobstruconssuchas

brake,fuelorelectricallineswhichmaybedamaged.Alsokeepinmindthisisanaer‐

marketproductandMAYrequireminorshimmingand/ortrimming,reaming,etc.for

properﬁt.RoadArmorisnotresponsibleforanydamagestovehicle.

IMPORTANT NOTICE

 Besuretoinspectandtestﬁtyourproducttoensureproperﬁtmentbeforehavingitcoated,painted,bed

lined,etc.

 RoadArmorwillnotberesponsibleforthecostofcoangyourunitifanyproblemswithﬁtorﬁnisharenot

notedandaddressedbeforehand.

MetricandSAESocketSetsandWrenchesT40BitSocket

None,thisproductusesfactoryhardware.







Page(3of6)

2007+JeepWranglerA‐PillarLightMountsPage(3of3)

1Removethetopﬁve(5)boltsfrom

windshieldsupportbracketon

eachsideusingtheT40BitSocket.

2FitupLightMountandboltonus‐

ingoriginalT40hardware.

3Nowinstallyourlights.

Finished.

/

Related papers

Other documents