Road Armor 518LMP0B Installation guide

Brand
Road Armor
Model
518LMP0B
Type
Installation guide

This manual is also suitable for

Road Armor 518LMP0B

The Road Armor 518LMP0B provides strong and stable mounting points for various light configurations on your 2018+ Jeep Wrangler JL or 2020+ Jeep Gladiator JT. With its sturdy construction and precise engineering, this mount ensures a secure and reliable platform for your lighting needs.

Here are some key features and possible use cases for the Road Armor 518LMP0B:

  • Versatile Mounting Options: The mount can accommodate a wide range of light configurations, including single "surface mount" lights or multiple lights when paired with the 518APLAB Light Arch Bracket (sold separately).

Road Armor 518LMP0B

The Road Armor 518LMP0B provides strong and stable mounting points for various light configurations on your 2018+ Jeep Wrangler JL or 2020+ Jeep Gladiator JT. With its sturdy construction and precise engineering, this mount ensures a secure and reliable platform for your lighting needs.

Here are some key features and possible use cases for the Road Armor 518LMP0B:

  • Versatile Mounting Options: The mount can accommodate a wide range of light configurations, including single "surface mount" lights or multiple lights when paired with the 518APLAB Light Arch Bracket (sold separately).
INSTALL INSTRUCTIONS
Applicaon : 2018+ Jeep Wrangler JL
2020+ Jeep Gladiator JT
JL / JT LIGHT PILLAR MOUNT:
518LMP0B, 518LMP1B,
(RIGID ADDAPT 50” SKU: 250413 ONLY)
518ALMP0B (RIGID ADDAPT) & 518ALMP1B (RIGID ADDAPT)
2018+ JEEP JL / JT PILLAR MOUNT Page ( 2 of 4)
www.ROADARMOR.com
INSTALL INSTRUCTIONS
SAFETY FIRST!
• FOLLOW ALL INSTRUCTIONS, YOUR SAFETY AND THE SAFETY OF OTHERS IS MOST IMPORTANT.
• WEAR APPROPRIATE EYE PROTECTION AND EXERCISE CAUTION WHEN DRILLING / CUTTING
REQUIRED TOOLS
Available Accessories
518APLAB : 50-Inch Light Arch Bracket (used with kit 518LMP#B ONLY)
Light Arch Bracket REQUIRED to mount mulple conguraons of single “surface mount” lights.
INCLUDED HARDWARE
I WARNING
Read the instrucons completely before beginning installaon. Before ghtening bolts,
drilling or cung where required, check to make sure there are no obstrucons such as
brake, fuel or electrical lines which may be damaged. Also keep in mind this is an aer-
market product and MAY require minor shimming and/or trimming, reaming, etc. for
proper t. Road Armor is not responsible for any damages to vehicle.
IMPORTANT NOTICE
• Be sure to inspect and test t your product to ensure proper tment before having it coated, painted, bed
lined, etc.
• Road Armor will not be responsible for the cost of coang your unit if any problems with t or nish are not
noted and addressed beforehand.
Metric and SAE Socket Sets and Wrenches Drill & Unibit
(12) 5/16”x 3/4” Bolts
(12) 5/16” Flange Nuts
(16) 5/16” Washers
(1) PSG COWL
(1) DVR COWL
(1) PSG LIGHT MOUNT
(1) DVR LIGHT MOUNT
518APLAB
2018+ JEEP JL / JT PILLAR MOUNT Page ( 3 of 4)
www.ROADARMOR.com
INSTALL INSTRUCTIONS
1 Remove 4 - 8mm bolts securing each OEM cowl.
2 Aer cowl is removed; tape 2 - 5/16”washers over back lower holes as shown below
3 Loosely assemble cowl and light mount with 6 - 5/16” bolt and ange nuts.
4 Install light mount assembly onto cowl using 8mm OEM bolts.
5 Install light running wiring inside the upright
6 Tighten all hardware at this me. (*Be sure pillar brackets are not rubbing on windshield*)
2
2
2
FINISHED!
  • Page 1 1
  • Page 2 2
  • Page 3 3

Road Armor 518LMP0B Installation guide

Brand
Road Armor
Model
518LMP0B
Type
Installation guide
This manual is also suitable for

Road Armor 518LMP0B

The Road Armor 518LMP0B provides strong and stable mounting points for various light configurations on your 2018+ Jeep Wrangler JL or 2020+ Jeep Gladiator JT. With its sturdy construction and precise engineering, this mount ensures a secure and reliable platform for your lighting needs.

Here are some key features and possible use cases for the Road Armor 518LMP0B:

  • Versatile Mounting Options: The mount can accommodate a wide range of light configurations, including single "surface mount" lights or multiple lights when paired with the 518APLAB Light Arch Bracket (sold separately).
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents