Valco baby TRAVEL SYSTEM ADAPTOR Operating instructions

Valco baby
Brand
Valco baby
Model
TRAVEL SYSTEM ADAPTOR
Category
Strollers
Type
Operating instructions

This manual is also suitable for

Page: 1
© Copyright
VE 2013
vs140813
USA
www.valcobaby.com
info@valcobaby.com
Find us on:
PRODUCT REFERENCE GUIDE
FURTHER INFORMATION:
CANADA
www.valcobaby.com
canada@valcobaby.com
Travel
System Adaptor
for Snap and Snap 4 prams to fit:
• Graco Classic Fit™ Travel System
• Peg Perego™ Travel System
• Maxi Cosi™Mico & Chicco Travel System
• Britax™Chaperone Travel System
Page: 2
TRAVEL SYSTEMS
DISCLAIMER
Due to our policy of continuous product development,
this product is constantly evolving. It is possible that
some features or procedures outlined here have changed
since this document was written. If you are unsure of
any procedure shown here, please contact us via the
web at info@valcobaby.com or call 1800-610-7850
to obtain the most up to date information before use.
Include the batch number and model number, which
can be found on a sticker on the frame.
All pictures and diagrams herein are provided for illustration
purposes only.
Actual product, colour or fabric may vary.
VALCO BABY reserves the right to modify or alter any
specification or colour without notice or obligation to
modify any product previously purchased.
Thank you for purchasing a quality
VALCO BABY product. Please read and
follow the instructions outlined in this
guide carefully. Familiarise yourself with
the construction and safety features;
be sure that you understand all the
warnings and safety guidelines before use.
Important: Please read the
following instructions carefully
before assembling
this product. Retain this guide in
a safe place for future reference.
Travel
System Adaptor
for Snap and Snap 4 prams to fit:
• Graco Classic Fit™ Travel System
• Peg Perego™ Travel System
• Maxi Cosi™ Mico & Chicco Travel System
• Britax Travel System
Graco Classic Fit™ Peg Perego™ Britax™Maxi Cosi™ Mico & Chicco
Insert
click
Push
Lift
Push
Lift
click
tighten
squeeze
RELEASE
CATCH
LIFT SMOOTHLY
UPWARDS
Lift
Push
Page: 3
3>INSTALL SEAT
GRACO CLASSIC FIT ™ TRAVEL SYSTEM
FOR FULL INSTRUCTIONS PLEASE REFER TO PAGE 7.
1>PARTS 2>REMOVE BUMPER BAR
a
a
a
c
b
b
e
d
4>REMOVE SEAT 5>REMOVE ADAPTOR
a
a
b
Britax™
click
Insert
click
Push
Lift
Push
Lift
click
tighten
squeeze
RELEASE
CATCH
LIFT SMOOTHLY
UPWARDS
Lift
Push
Page: 4
3>INSTALL SEAT
PEG PEREGO™ TRAVEL SYSTEM
FOR FULL INSTRUCTIONS PLEASE REFER TO PAGE 7.
1>PARTS 2>REMOVE BUMPER BAR
a
a
a
c
b
b
e
d
4>REMOVE SEAT
a
5>REMOVE ADAPTOR
a
a
b
Push
Lift
Push
Lift
squeeze
PUSH
click
tighten
click
tighten
Insert
click
Lift
Push
Page: 5
3>INSTALL SEAT
Maxi Cosi™ Mico & Chico Travel System
FOR FULL INSTRUCTIONS PLEASE REFER TO PAGE 7.
1>PARTS 2>REMOVE BUMPER BAR
a
a
a
c
b
b
e
d
4>REMOVE SEAT
a
b
5>REMOVE ADAPTOR
a
click
Insert
click
Push
Lift
Push
Lift
click
tighten
squeeze
RELEASE
CATCH
LIFT SMOOTHLY
UPWARDS
Lift
Push
Page: 6
3>INSTALL SEAT
BRITAX™ CHAPARONE TRAVEL SYSTEM
FOR FULL INSTRUCTIONS PLEASE REFER TO PAGE 7.
1>PARTS 2>REMOVE BUMPER BAR
a
a
a
c
b
b
e
d
4>REMOVE SEAT
a
5>REMOVE ADAPTOR
a
a
b
Page: 7
INSTRUCTIONS
GRACO™ TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptor
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Tilt the rear of the car seat so that the hooks
engage over the rear bar. Tilt the seat forward until
you hear it click securely onto the adaptor. Test the
car seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible.
4>TO REMOVE THE SEAT
(a) Squeeze the buckle to release the security straps.
(b) Operate the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
PEG PEREGO™TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptor
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Hold the car seat directly over the adaptor, align
the locking brackets in the base of the seat with the
locking uprights on the adaptor. Push down on the
seat firmly until you feel the locking uprights click
into place. Test the car seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible.
4>TO REMOVE THE SEAT
(a) Squeeze the buckle to release the security straps.
(b) Operate the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
MAXI COSI™ MICO & CHICCO™
TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptors
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Place the car seat so that it engaged over the rear
bar. The Maxi Cosi Car Seat will rest on the bar. The
Chicco Car Seat will click into the bar. Test the car
seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible. Make sure Maxi Cosi Car Seat is
secure in the straps.
4>TO REMOVE THE SEAT
(a) Squeeze the clasp to release the security straps.
(b) Press the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
BRITAX™ CHAPARONE TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptors
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Tilt the rear of the car seat so that the hooks
engage over the rear bar. Tilt the seat forward until
you hear it click securely onto the adaptor. Test the
car seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible.
4>TO REMOVE THE SEAT
(a) Squeeze the clasp to release the security straps.
(b) Press the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
FURTHER INFORMATION:
CANADA
www.valcobaby.com
canada@valcobaby.com
USA
www.valcobaby.com
info@valcobaby.com
Page: 8
WARNING: To AvoId INjuRy oR deATh
• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
• PUT ON ALL THE BRAKES WHENEVER YOU PARK THE PRAM/STROLLER.
• DO NOT LEAVE CHILDREN UNATTENDED.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS PRAM/STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE PRAM/
STROLLER. OTHERWISE THEY MAY BE INJURED.
Remember, your child’s safety is your responsibility...
•NEVERUSEONStaiRSORESCaLatORS.
•aLwaySUSEthEtEthERStRapwhENthEStROLLERiSiNUSE.
•thECORRECtUSEaNDMaiNtENaNCEOFthiSVEhiCLEaREESSENtiaL.
•BESUREthataLLCLaMpSaNDBUCkLESaRESECURELyFixEDaNDiNpLaCEBEFORE
USE
•whENiNthEStROLLER,yOURChiLDMUStaLwaySwEaRthESaFEtyhaRNESS,COR-
RECtLyFittEDaNDaDjUStED,ataLLtiMES.
•NEVERExCEEDthEMaxiMUMwEightORhEightOFthEChiLDFORwhiChyOURCaR
SEatiSiNtENDED-REFERtOyOURCaRSEatMaNUaLFORiNFORMatiONREgaRDiNg
thEwEightaNDhEightFORwhiChthESEatCaNBEUSED.
•REFERtOyOURCaRSEatMaNUaLFORUSagEiNStRUCtiONS
•NEVERRUNwithaNEwBORNBaByiNaNypRaMORStROLLER.
•ChECkaLLpaRtSBEFOREUSEFORBREakagEORFatigUE.DiSCONtiNUEUSEiMMEDi-
atELyiFaNypaRtiSFOUNDtOBEDaMagEDORBROkEN.
•MaxiMUMLOaDOFBaSkEtS:3.5kgS/7.7LBS.
•aLwaySBEawaREOFthERiSkSpROViDEDByFiREaNDOthERSigNiFiCaNtSOURCES
OFhEatSUChaSRaDiatORS,
EtC.whiChMayBEiNthEiMMEDiatEViCiNityOFyOURStROLLER.
•itMayBEUNSaFEtOUSEaNyaCCESSORiESOthERthaNVaLCOappROVEDONES.
•thiSpRODUCtiSiNtENDEDFORDOMEStiCUSEONLy.itiSNOtiNtENDEDFORCOM-
MERCiaLUSE.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Valco baby TRAVEL SYSTEM ADAPTOR Operating instructions

Valco baby
Brand
Valco baby
Model
TRAVEL SYSTEM ADAPTOR
Category
Strollers
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents