IPT Sink Company IPTGR2217-BLK Installation guide

Type
Installation guide
PAGE 1
Quartz Composite Sink
Installation Instructions
Carefully review complete instructions before beginning installation. These instructions are for
installation with solid surface and composite material countertops. A professional installer is
recommended to prevent damages to the sink or countertop during installation. Warranty void
for improper installation and handling.
Handling
Be sure to wear personal safety devices such as safety goggles at all times. !
Hole Additions
Faucet holes are predrilled from the bottom and marked yellow on top ledge.
Tap the yellow marker only from the top.
Use a screwdriver and center it in the middle of the hole and then hit it with the hammer.
!
GRANITE SINK INSTALLATION GUIDE
Contact IPT Sink Company at (678) 445-4638 or visit www.iptsink.com. Copyright ©2019, IPT Sink Company Inc. All rights reserved.
Ø35mm
Please Do Not hit with the
hammer directly.
Do not apply force to
the corners
Watch your hands Do not stand on
the sink
Please Do Not hit from the
bottom of the sink.
PAGE 2
Quartz Composite Sink
Installation Instructions
Topmount/Drop-in Installation
!
Topmount/Drop-in Installation
Mounting and fastening clips
!
Flush Mount Installation
!
Undermount Installation
!
Contact IPT Sink Company at (678) 445-4638 or visit www.iptsink.com. Copyright ©2019, IPT Sink Company Inc. All rights reserved.
B
Silikon
5
6
1
4
2
3
Silikon
≥ 2mm
1mm
10mm
7mm
Silikon
Epoxi
Silikon
Epoxi
180
Epoxy
30mm
12mm
12mm
  • Page 1 1
  • Page 2 2

IPT Sink Company IPTGR2217-BLK Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI