Magnus Sinks MSDP5050 Installation guide

Type
Installation guide

Magnus Sinks MSDP5050 is a top mount sink made of stainless steel with the following capabilities:

  • The sink is designed to be installed by an experienced professional.
  • The sink is intended for residential use only.
  • It can only be installed in a solid surface countertop.
  • The sink comes with a limited lifetime warranty, which covers defects due to material or craftsmanship errors.

Magnus Sinks MSDP5050 is a top mount sink made of stainless steel with the following capabilities:

  • The sink is designed to be installed by an experienced professional.
  • The sink is intended for residential use only.
  • It can only be installed in a solid surface countertop.
  • The sink comes with a limited lifetime warranty, which covers defects due to material or craftsmanship errors.
PAGE 1
Top Mount Stainless Steel Sink
Installation Instructions
Before You Start
• Magnus Sinks recommends that all top mount sinks be installed by an experienced, professional
installer.
• IMPORTANT: The cabinet must be installed, secured, plumb, and level. Failure of this step can
lead to product damage.
• Magnus Sinks top mount sinks should only be fastened to a solid surface countertop
(i.e. granite, Corian® or Silestone®).
• Magnus Sinks is not responsible for sink or countertop if damaged during installation.
Be sure to inspect the sink for damage prior to beginning installation.
• Metal edges may be sharp – use caution when handling.
• Follow all local plumbing and building codes.
Recommended Tools & Materials (Not Included)
 Tape Measure
 Safety Glasses
 Painters Tape
 Level
 Framing Square
 Pencil (not permanent marker)
 Shims or Cabinet Fillers
 Denatured Alcohol
 Clamps
 Construction Adhesive
 Silicone Sealant
 Screws (recommended by countertop manufacturer)
Single Bowl Kitchen Sink 50/50 Double Bowl Kitchen Sink 60/40 Double Bowl Kitchen Sink
Contact Magnus Sinks at (678) 445-4638 or visit www.magnussinks.com. Copyright ©2017, Magnus Sink Company Inc. All rights reserved.
PAGE 2
Top Mount Stainless Steel Sink
Installation Instructions
SINGLE BOWL DIMENSIONS
Contact Magnus Sinks at (678) 445-4638 or visit www.magnussinks.com. Copyright ©2017, Magnus Sink Company Inc. All rights reserved.
PAGE 3
Top Mount Stainless Steel Sink
Installation Instructions
50/50 DOUBLE BOWL DIMENSIONS
Contact Magnus Sinks at (678) 445-4638 or visit www.magnussinks.com. Copyright ©2017, Magnus Sink Company Inc. All rights reserved.
PAGE 4
Top Mount Stainless Steel Sink
Installation Instructions
60/40 DOUBLE BOWL DIMENSIONS
Contact Magnus Sinks at (678) 445-4638 or visit www.magnussinks.com. Copyright ©2017, Magnus Sink Company Inc. All rights reserved.
PAGE 5
Top Mount Stainless Steel Sink
Installation Instructions
Position the sink (A) upside down on the countertop.
Trace completely around the edge of the sink (A).
Draw a line 5/16” inside of the outline of the sink.
Drill a pilot hole in all four corners of the inside line.
Use a saber saw or jig saw to cut on the inside line.
Place a support underneath the cutout portion of the
countertop to prevent it from falling during cutting.
Apply silicone sealant (not included) around the cutout
on the countertop surface.
Carefully lower the sink (A) into the cutout in the countertop.
Preassemble the clamps and screws (AA).
From the underside - place the clamp (AA) in the center along
each side and hand tighten to hold sink in place. Fasten the
remaining clamps (AA) along the edges and space them
approximately 3 in. from each end, and equally along the
front, back and sides. For countertops thicker than 3/4 in.,
space them up to 1-1/2 in. apart.
From the top - check the seal between the sink (A) edge and
countertop. Adjust clamps (AA) if necessary.
Lightly tighten clamps (AA) evenly with a screw driver until the
sink is perfectly tight to the countertop. Do not over tighten.
Wipe away any excess sealant with a rag.
PREPARING THE COUNTERTOP CUTTING THE COUNTER
INSTALLING THE SINK
1 2
3
WARNING: Always wear safety goggles and gloves
when using power tools to prevent personal injury.
Contact Magnus Sinks at (678) 445-4638 or visit www.magnussinks.com. Copyright ©2017, Magnus Sink Company Inc. All rights reserved.
Limited Lifetime Sink Warranty
This product has been manufactured and tested to the highest quality standards by Magnus Sinks. We
strive to provide our customers with the most thoughtfully crafted xtures & accessories, engineered for
enduring performance over years of use.
WHO IS COVERED BY THE WARRANTY
This warranty extends to the original purchaser only. This warranty is not transferable, between homes or
owners and is only applicable to residential use.
WHAT IS COVERED BY THE WARRANTY
Magnus Sinks warranties this product against defects due to material or craftsmanship error during the
warranty period: Magnus Sinks will provide replacement parts at no charge, or at its option, replace any
product or part of the product that is deemed defective, under normal installation, use, service and main-
tenance. If Magnus Sinks is unable to provide a replacement and repair is not practical or cannot be
made in a timely fashion, Magnus Sinks may elect to refund the purchase price in exchange for the return
of the product.
CONDITIONS AND EXCLUSIONS
Like other home xtures, Magnus Sinks products will require light maintenance to ensure proper function.
We provide you with complete knowledge to perform this maintenance and can also recommend
resources if you are unable to fulll this service.
A. Magnus Sinks will not be responsible for product failures due to lack of maintenance or proper use.
Please read your care and maintenance documentation to determine the limits of proper use.
B. The original sales receipt, order number, and/or proof of purchase must be presented at the time of the
warranty claim, without exception, for this warranty to be applied to all Magnus Sinks products.
C. Magnus Sinks recommends installing all Magnus Sinks products with a licensed, professional plumber.
Magnus Sinks will not be held responsible for any damage or product failure due to improper installation,
misuse, or failure to use a licensed professional. Please read your care and maintenance documentation
to determine the limits of proper use.
D. Commercial use will automatically void this warranty.
NON-APPLICABILITY OF THIS WARRANTY
By the purchase and use of our products, you agree that Magnus Sinks is not liable for incidental,
consequential or special damages associated with the return, replacement, installation or use of your
product. This includes freight costs, cartridge replacement, labor, travel time, lost prot, home damages
and other contingent liabilities and costs (including, without limitation, costs associated with experts,
investigations, analyses, attorneys and other professionals and services). The Magnus Sinks warranty is a
comprehensive and explicit limit of liability and all items outside of it are not addressable by or the respon-
sibility of Magnus Sinks. Certain states have variances regarding implied warranties and in those situations
we remain fully compliant.
Magnus Sinks makes no implication that products comply with any or all local building or plumbing codes.
It is the consumer’s responsibility to determine local code compliance. This warranty extends to the origi-
nal purchaser and rst consumer.
For additional information or warranty issues visit www.magnussinks.com or contact Magnus Sinks directly:
PHONE (678) 445-4638
PAGE 6
Contact Magnus Sinks at (678) 445-4638 or visit www.magnussinks.com. Copyright ©2017, Magnus Sink Company Inc. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Magnus Sinks MSDP5050 Installation guide

Type
Installation guide

Magnus Sinks MSDP5050 is a top mount sink made of stainless steel with the following capabilities:

  • The sink is designed to be installed by an experienced professional.
  • The sink is intended for residential use only.
  • It can only be installed in a solid surface countertop.
  • The sink comes with a limited lifetime warranty, which covers defects due to material or craftsmanship errors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI