Golden Lighting 7041-9 BLK-CLR Operating instructions

Brand: Golden Lighting

Model: 7041-9 BLK-CLR

Type: Operating instructions

Golden Lighting 7041-9 BLK-CLR is a versatile and stylish light fixture that can be used to enhance the ambiance of any room. With its adjustable height and chain length, it can be customized to fit various ceiling heights and lighting needs. The fixture features a durable metal construction with a black finish and clear glass shades, providing a touch of elegance to any décor. Installation is straightforward and requires only basic tools, making it a convenient choice for DIY enthusiasts. The fixture accommodates multiple bulbs, allowing you to adjust the brightness to your desired level.

Assembly Instructions: 7041-9 (Monroe)

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

House Wires

Fixture Wires

Hot

How to Identify the Fixture’s Wires

Hot Neutral Ground

Smooth

Ribbed

Bare Metal,

Green, or

Green Inner

Thread

Black

White

Black Inner

Thread

White Inner

Thread

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important notes

above. Shut off the power at the circuit breaker and completely remove

theoldxturefromtheceiling,includingtheoldmountingstrap.

1. Take the mounting strap assembly from the parts bag. One end of

nipple(F)shouldbeattachedtomountingstrap(A)withwasherandhex

nut (C and D) in place. Canopy loop (H) is attached to the other. Securely

attachmountingstrap(A)tothejunctionboxusingmountingscrews(B)

and a screwdriver.

2. Unscrew canopy loop collar (I) from canopy loop (H). Pass canopy (G)

overthemountedcanopylooptotesttheheight.Approximatelyhalfof

thecanopyloop’sexteriorthreadsshouldbeexposed,andthecanopy

loopcollarshouldtsnuglyontothecanopyloop.Removecanopy(G)

andadjusttheheightofnipple(F)andcanopyloop(H)untilthedesired

heightisreached.

3.Oneofconnectorrods(N)hasthexture’swiresinside.Hook

connectorrods(N)totheframeatloops(Q)andthenpullthexture

wires until taut. Attach the top of connector rods (N) to loops (R). Top

loop(L)isonthexturewires,butnotattachedtothebodyofthexture.

Passthexturewiresthroughtoploop(L).Pullthewiresuntiltautand

threadtoploop(L)ontothexturebody.

4.Bymeasuring,determinethecorrectnumberofchainlinksneeded

forproperhangingheight.Ifnecessary,useapairofplierstoopenand

removeanyexcesschain.Attachonechainconnector(K)toeachendof

chain (J). Use one of chain connectors (K) to attach chain (J) to top loop

(L)andclosethechainconnector.Feedthexturewiresupthroughthe

chain(everythreelinksorso),pullingthewiresuntiltaut.Slidecanopy

loop collar (H) and canopy (G) onto the chain/wire. Use the free chain

connector (K) to attach chain (J) to canopy loop (H).

FINISHING THE INSTALLATION

6.Raisecanopy(G)uptotheceilingandslidecanopyloopcollar(I)upbeneaththecanopy.Tightlythreadcanopyloopcollar(I)onto

canopy loop (H) to secure canopy (G) in place.

7.Slideglassshades(P)oversockets(M)andsecureinplacewithsocketcovers(O).

Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended

wattage.

Yourinstallationiscomplete.Turnonthepowerandtestthexture.

For Customer Service, please

contact the place of purchase.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

CONNECTING THE WIRES

5.Haveanassistantsupportthextureweightwhilecompletingthewiring.Cutawayexcesswire.Attachthexture’swirestothe

powersupplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite(orribbed);groundtoground(green

orcopper).Twisttheendsofthewirepairstogether,thentwistonawireconnector.Makesurealltwistsareinthesamedirection.If

thereisnogroundwire(greenorcopper)fromthejunctionbox,locategroundscrew(E)onmountingstrap(B)andwrapthexture’s

groundwirearoundthegreengroundscrew(E).Useascrewdrivertosecuregroundscrew(E)ontothemountingbracket.Tuckall

wiresneatlyintothejunctionbox.

Golden Lighting 7041-9 BLK-CLR Operating instructions

Golden Lighting 7041-9 BLK-CLR Operating instructions

Golden Lighting 7041-9 BLK-CLR Operating instructions

Related papers

Other documents