Assembly Instructions: 2245-3P/5 (London)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes above. Shut off the power at the circuit breaker and
completely remove the old xture from the ceiling, including the old mounting strap.
1.Thexturecanbeinstalledinthreedifferentways.Decidehowyouwouldliketohangthexture.Takethemountingstrapassemblyfrom
thepartsbag.Oneendofnipple(F)shouldbeattachedtomountingstrap(A)withwasher(C)andhexnut(D)inplace.Canopyloop(H)is
attachedtotheotherend.Securelyattachmountingstrap(A)tothejunctionboxusingmountingscrews(B)andascrewdriver.
2.Unscrewcanopyloopcollar(I)fromcanopyloop(H).Passcanopy(G)overthemountedcanopylooptotesttheheight.Approximatelyhalf
ofthecanopyloop’sexteriorthreadsshouldbeexposed,andthecanopyloopcollarshouldtsnuglyontothecanopyloop.Removecanopy
(G)andadjusttheheightofnipple(F)andcanopyloop(H)untilthedesiredheightisreached.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
CONNECTING THE WIRES
5.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Refertothewiringdiagramandattachthexture’swiresto
thepowersupplywiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundtoGround.Twisttheendsofthewire
pairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesamedirection.Ifthereisnohousegroundwirecoming
fromthejunctionbox,locategroundscrew(E)onthemountingbracket/mountingstrapandwrapthexture’sgroundwirearoundthe
groundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)ontothewiresandintothemountingbracket/mountingstrap.Tuck
thewiresintothejunctionbox.
FINISHING THE INSTALLATION
6.Pushcanopy(G)uptotheceilingandslidecanopyloopcollar(I)upbeneaththecanopy.Tightlythreadcanopyloopcollar(I)onto
canopyloop(H)tosecurecanopy(G)inplace.
7.Installlightbulbs(notincluded)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
ASSEMBLING THE FIXTURE
3.Slidecandlesleeves(Q)overthesockets.
Threadthexture’swiresthroughcenterrod(O)
andpost(M)atthecenterofthexture’slamp
cluster.Refertothediagrams.Ifinstallingwith
theoptionalcage,attachtoprod(O)topost(M).
Assemblethecagebyusingscrews(P)and(U))
andallenwrench(T)toconnectframesides(S)
toframetopandbottom(N-1andN-2).Holdthe
assembledcageupsothatthexture’slamp
clusterisinsideandhaveanassistantattachthe
bottomhooksofconnectorrods(V)totheloops
(P)ofthecage.Donotletgoofthecageuntil
allrods(V)areattached.Attachthefreeendsof
rods(V)totheholesintopring(R).Ifinstalling
withoutthecage,toprod(O)isoptional.
4.Measuretodeterminethecorrectlengthof
chainneeded.Ifnecessary,useapairofpliers
toopenandremoveanyexcesschain.Attach
oneofchainconnectors(K)tochain(J).Pass
thexture’swiresthroughtoploop(L).Attach
oneendofchainconnector(K)totoploop(L)
andclosechainconnector(K).Feedthexture’s
wiresupthroughthechain(everythreelinks
orso),pullingthewiresuntiltaut.Usethefree
chainconnector(K)toattachchain(J)tocanopy
loop(H).Slidecanopyloopcollar(H)and
canopy(G)downontothechain/wires.Add8to
10inchestothedesiredwirelength.
L
M
N-1
N-2
O
P
R
Q
S
T
U
V
W
A
B
F
K
G
I
H
D
K
J
C
E
M
O
R
L
Q
W
A
B
F
K
G
I
H
D
K
J
C
E
M
L
Q
W
A
B
F
K
G
I
H
D
K
J
C
E