ENGLISH
TOUCH CONTROL
INSTALLATION AND SERVICING MANUAL
Uy BOX
2
3
Attention:
The manufacturer will not be held liable in case of damage to persons, animals or objects resulting from
failure to comply with the instructions contained in the manuals supplied with the boiler.
1 DESCRIPTION ................................................................................................................................................4
1.1 Reading Icons in Home page ................................................................................................................4
1.2 Part description .......................................................................................................................................4
2 DISPLAY AND FUNCTIONS DESCRIPTION ................................................................................................5
2.1 Display mode ...........................................................................................................................................5
2.2 Button One page back and Button Home ...............................................................................................5
2.3 Display in Home page .............................................................................................................................5
2.4 Set up Menù ............................................................................................................................................6
WiFi conguration ..................................................................................................................................10
2.5 CH Heating Menù ..................................................................................................................................12
2.5.1 Hot keys .......................................................................................................................................12
2.5.2 Programming and possible adjusting at preset programs ...........................................................14
2.6 DHW domestic hot water Menù .............................................................................................................20
2.6.1 Hot keys ......................................................................................................................................20
2.6.2 rogramming and possible adjusting at preset programs .............................................................22
2.7 Solar Menù ...........................................................................................................................................24
2.8 Devices Menù ........................................................................................................................................25
2.9 Burner Menù ..........................................................................................................................................27
Info ........................................................................................................................................................30
Screen calibration ..................................................................................................................................31
Analytical index
Burner / Generator ..............................................................................................................................................27
CH default ........................................................................................................................................................14
CH Heating hot keys............................................................................................................................................12
Comfort ................................................................................................................................................7-12-13
Compensation ......................................................................................................................................................7
Correction ..........................................................................................................................................................7
Day 1 2 3 ........................................................................................................................................................15
DHW domestic hot water .....................................................................................................................................20
Eco ................................................................................................................................................7-12-13
External compensation chart ...............................................................................................................................18
Gateway ..........................................................................................................................................................7
Legionella ...................................................................................................................................................21-22
Manual function ...................................................................................................................................................19
Maximum boiler ...................................................................................................................................................18
Maximum ow ......................................................................................................................................................18
Maximum outdoor ................................................................................................................................................18
Minimum boiler ...................................................................................................................................................18
Minimum ow .......................................................................................................................................................18
Minimum outdoor .................................................................................................................................................18
Modbus ..........................................................................................................................................................8
Modulation temperature.......................................................................................................................................16
Period 1 - 2 - 3 ....................................................................................................................................................17
Real temperature .................................................................................................................................................16
Request temperature ...........................................................................................................................................16
Reset ...................................................................................................................................................19-23
Room thermostat ...................................................................................................................................................7
Screen Calibration ...............................................................................................................................................31
Solar panel #1 - #2 ..............................................................................................................................................24
Summer ........................................................................................................................................................13
Tank bottom ........................................................................................................................................................24
Tank top ........................................................................................................................................................24
Week 1 - 2 - 3 .....................................................................................................................................................15
Winter limit ........................................................................................................................................................18
4
1
Description
KEY
1 RJ plug for wiring to BMM boiler
2 Display Touch
3 Staus leds
green
In operation OK (xed light)
red
Failure deyected (ashing light)
4 Magnets for xing
5 RJ socket
1.2 - Part description
1.1 - Reading Icons in Home page
Buttons and symbol (outline + lled color area)
shown only in Home page
Service present and in operation at that time
Buttons and symbol
(outline in dark grey no lled area)
Service disabled or o but installed
Buttons and symbol
(outline + empty color area)
Service present but not in operation at that time
Buttons and symbol
(outline in ligh grey no lled area)
Service not installed
Nota: Le icone di pagina Menù non indicano lo stato di funzionamento.
5
2
Display and functions description
6 Display Mode
Stand-by
7 Display Mode
Home page
8 Display Mode
Menù page
2.1 - Display mode
2.2 - Button One page back and Button Home
2.3 - Display in Home page
9
One page back
10
Return always to Home page
11
INFO: see at pag. 30
12
Boiler: Domestic = 0 ... 1* / 1
Professional 0 ... 2* / 8
(*) in operation, for ex:
(2 boiler activate of 8 avaible)
see at pag. 27.
6
2.4 - Set up Menù
First start - Setting Time and Date
7
Setting temperature Eco and Comfort for continuous programs in Heating circuit (H24)
Enable room thermostat, only with room sensor
connect to the boiler (the bridge of TA
terminals on Gateway must be removed).
In this case Uy is used as cronothermostat.
Ch 13 = Name of heating circuit editable
(see page 14)
DEFAULT VALUE: comfort 20°C / eco 5°C
DEFAULT VALUE: comfort 50°C / eco 25°C
Setting temperature Eco and Comfort for continuous programs in DHW circuit (H24)
Legionella protection: to be activated only in the pre-
sence of water accumulations (boilers with kettle or
external tanks),
(pag. 21- 22).
Correction: Change the setting value if room sensor
measures a dierent value than expected.
Compensation: increase the value if the system eort
to reach the environment set.
8
If change language, for a complete update of texts, remove and replace RJ
plug.
it’s possible to choose language and measurement unit between metric and imperial.
In Homepage the screen turn o after the set time (Default 20 sec.) while the screen is on in other page. if the switch is active
No stand by, in case of fault message screen also in Home page doesn’t turn o.
Note: Do not change the value congured for Modbus
boiler.
Brightness and Stand by setting
Language and Unit setting
9
To change password
- Enter current password and conrm
- Delete current password with
- Enter new password and conrm
To restore default values set at the factory.
Password
Software information and restore default UyBox settings
Note: for security and protection, default password is
only avaible to the Authorized Service Center.
10
1 Connecting to the net (select Icon Net)
2 Wait and select your home network.
3
Access to Password eld and type
password of your home network
Wait for WiFi - Web
Serial number is already set to the bench of
testing boiler
Uy APP (*)
WiFi conguration for use with App
(only if gateway is present)
11
Join Uybox with smartphones
4
After installing the app on your device and
the recording started and made it can be
paired the boiler. Select “Add Prole” and
enter in the eld SERIAL NUMBER serial
number and in the NAME a name of your
choice. Then select “REQUEST”
5
Wait few seconds, on display of Uy Box will
show a random code XXXX (*)
Pairing in the box.
6
This code must be entered on the device in the
eld CODE CONFIRMATION, then select CON-
FIRM. Now the device is correctly associated to
the boiler.
7 Set up Uy App from your device
UFLY APP is available for free on your device sto-
re and guarantees the interactivity of all detachable
functions.
Mobile screen
12
2.5 - CH Heating Menù
2.5.1 - Hot keys
Change heating temperature:
Choose CH program:
Change confort / eco temperature with keys
as indicated
13
Manual Request
To switch ON continuous heating at comfort
temperature previously set at 22°C select
COMFORT:
To switch ON continuous heating at comfort
temperature previously set at 18°C select
ECO:
To switch ON heating at the times as in the example:
Ignition from 06.00 at 07.30 Temp. XX °
Ignition from 17.00 to 20.30 at the temp. YY °
Ignition from 20.30 to 22.30 at the temp. XY °
select WEEK1 - WEEK2 - WEEK3:
For a manual request and extend / stop heating period
for a few hours at certain temperature, touch icon shown
(HAND)
Set end of heating and (change) temperature.
Default time set 1 hour forward from eective hour.
Switch OFF CH Heating (SUMMER)
select STANDBY:
DEFAULT value are the same for
WEEK1 - WEEK2 - WEEK 3
Note: Modify as you prefer / regulatory guidelines
14
Set Type Days
Eventually rename Day 1.....Day5
example: Working day, Weekday, Holiday
2.5.2 - Programming and possible adjusting at preset programs
Creation / modication of typical days
Selezione Circuito Ch
Is possible change Name of heating circuit in the
system
- Delete Ch... current circuit
- Rename Zone circuit...and conrm
Set Days Type
Optionally rename Day 1 ..... Day5
example: Jobs, Weekday, Festive.
15
Set periods
Max 3 time slots.
Set Week Type (1)
Eventually rename Week 1.....Week 3
example: Autumn, Winter, Jolly.
Insert day of the week separately
(mon-tue-wed.-thu.-fri.-sat-sun) the day type
Day1....Day5.
Set Week Type (2)
Insert day of the week join the day
(mon-fri-sat-sun) the day type Day1....Day5
16
Choose Heating program
Standby (only frost protection)
Comfort
Eco
Week1
Week2
Week3
Keys
room = Current temperatur request
real = Water temperatur of circulation
in radiators
request = Flow temperature +
compensation
modulation = Modulation level of the boiler in the
moment
Showing temperature in CH Heating
17
By touching Icon shown
It shows only the details of the program in the
1-2-3 ... period.
Example
Heating at times:
Period 1
From 06.00 at 07.30 at 21° temperature
Period 2
From 16.30 at 20.30 at 19° temperature
Period 3
From 20.30 at 22.30 at 21° temperature
View detail CH heating program (1)
18
Parameters displayed are relative to the heating pro-
gram, those with (*) are displayed only if activated
external compensation (outdoor sensor present)
Note: Then to adjust heating parameters is not ne-
cessary to drive on DEVICES menu.
Temperatures notes:
The maximum ow temperature can not exceed the
maximum temperatur of generator (even if you try
to overcome it is prevented).
Adjust parameters heating program.
By touching Settings icon is possible to adjust the para-
meters.
For those highlighted in gray, password is required.
For other parameters, dotted, no need password.
Outer temperature
External Compensation Chart - T max 70°C - T outer da 5°C ÷ 20°C - T min 30°C
Flow temperature
The three lines
at 19 ° C - 20 ° C
- 21 ° C represent
performance of
the ow tempera-
ture with change
of the environ-
ment tempera-
ture.
Adjust parameters heating program
19
Enabling Function Manual - set parameter
Is possibile to view and modify program and HEATING
parameter
If the boiler is in Error (Block)
Reset as shown
At Home page
Enabling Function Manual
Back to the set program.
Ch Heating Manual request
View detail CH heating program (2)
Reset
20
2.6 - DHW Domestic Hot Water Menù
2.6.1 - Hot keys
- Boiler C (combi DHW+CH)
Hot water production is set to default at the comfort
temperature 50 °C.
To change the temperature of the hot water circuit
press:
To deactivate DHW hot water production (STANDBY)
(No hot water production)
- select stand-by for Boiler R (only Heating):
Choosing DHW (hot water) program
Standby (inactive)
Comfort
Eco
Week 1
For boilers with water tank
inside or external (stock of
water)
Week 2
Week 2
Key
real = Temperature at the moment of DHW
(draw o) hot water
request = Water temperature request
modulation = Modulation level boiler
Temperature displaying in DHW mode
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
