Unical OSA S User manual

ENGLISH

TOUCH CONTROL

INSTALLATION AND SERVICING MANUAL

Uy BOX

3

1

Description

KEY

1 RJ cable for wiring to BMM boiler.

2 Display Touch

3 Led di stato

green

In operation OK (xed light)

red

Failure deyected (ashing light)

4 Magnets for xing

5 RJ plug

1.2 - Part description

1.1 - Reading Icons

Buttons and symbol (outline + lled color area)

This service is in operation at that time

Buttons and symbol (outline in dark grey no lled

area)

Disabled or switched off service but present or

installed

Buttons and symbol (outline + empty color area)

Present and active service but not in operation at

that time

Buttons and symbol (outline in ligh grey no lled

area)

No service or not installed

4

2

Display and functions description

6 Display mode

Disbled

7 Display mode

Home page

8 Display mode

Menù page

2.1 - Display mode

2.2 - Button One page back and Button Home

2.3 - Display in Home page

9

One page back

10

Return always to Home page

11

INFO: see at page 26

5

2.4 - Menù Set up

6

Menù Set up

7

Set parameters

Save changes

Menù Set up

If change language, it is necessary to remove and insert RJ plug, to store

changes.

8

1 Connecting to the net (select Icon Net)

2 Wait and select the dened Net

3

Wait for connection to dened Net, access to

WI-FI Password and digit.

Wait for WiFi - Web

The serial number (GP) is already set at the

bench testing boiler

link Uybox to smartphones

(Wi device)

4

Once installed and start Uy APP (*) from WiFi

device,

5

Link Serial Number of the boiler indicated in

Uy BOX on WiFi device.

6

Wait few seconds, on the display of Uy BOX

will show a random code xxxxxx (**)

in the box Pairing.

7

This code must be reported on the WiFi device.

At this point my WiFi device is correctly linked

to the boiler

(*)

Uy APP at the moment is in testing phase,

It is released on demand from post-sales ofce.

Soon it will be available on the Store and Unical

site.

2

1

5

6

Uy APP (*)

Menù Set up

9

At every boiler lighting, UFLY BOX scans devices, if

new devices are recognized, such as:

hcm /

bcm

Heating / Burner Control Manager

System manager / Cascade

shc

Slave Heating Controller

Multifunction module

bmm

Burner Modul Manager

They are displayed on the next screen, and is

prompted to save the new conguration.

Icon scanning devices

Icon save new conguration

Detected Device

Not installed device

Device previously detected, but not detected

at the moment .

2.5 - Menù Device

10

BMM / HCM Parameter

List of parameter in par. 4.2 instruction manual of the

boiler

To change the parameters is required password.

Hystorical Error

Clean display with Button Clear.

Menù Device

11

Set Day Type

Eventually rename Day 1 Day 5 .....

example: Working day, Weekday, Festive.

Selection circuit CH

Change name to circuit and Save.

2.6 - Menù Heating

12

Set Week Type (1)

Eventually rename Week 1.....Week 3

example: Autumn, Winter, Jolly.

Insert day of the week separately

(mon-tue-wed.-thu.-fri.-sat-sun) the day type

Day1....Day5.

Set Week Type (2)

Insert day of the week join the day

(mon-fri-sat-sun) the day type Day1....Day5

Set periods

3 Time slots.

13

Select circuit to show set program

Standby

Comfort

Eco

Week1

Week2

Week3

14

Touching the icon

It shows only the details of the program in the

1-2-3 ... period.

Menù Heating

15

The parameters displayed are relative to the hea-

ting program.

Note:

- To change the heating parameters is not neces-

sary to go in the DEVICES menu.

- The psw remains active until you return to the

MENU’.

Edit Parameters Heating circuit.

Touching Settings icon you can change the hi-

ghlighted parameter. It is required password.

For other parameters you need not password.

Menù Heating

16

Working Manual set the parameter

Is it possible View and Modify program and HEATING

parameters

Example Boiler in Error (Block):

Reset the boiler with R button

From Home Page

Activation in Working Manual

Return to operation with the set program (automatic).

Menù Heating

17

Set Day Type

Eventually rename Day 1.....Day5

example: Working time, Weekday, Festive.

2.7 - Menù DHW

Set periods

3 Time slots.

18

Menù DHW

Set Week Type (1)

Eventually rename Week 1.....Week 3

example: Autumn, Winter, Jolly.

Insert day of the week separately

(mon-tue-wed.-thu.-fri.-sat-sun) the day type

Day1....Day5.

Set Week Type (2)

Insert day of the week join the day

(mon-fri-sat-sun) the day type Day1....Day5

19

Menù DHW

Select circuit to show set program

Standby

Comfort

Eco

Week1

Week2

Week3

20

Legionella protection activation

The parameters displayed are relative to the heating

program.

Note:

- To change the heating parameters is not ne-

cessary to go in the DEVICES menu.

- The psw remains active until you return to the

MENU’.

Edit Parameters DHW

Touching Settings icon you can change the highli-

ghted parameter. It is required password.

For other parameters you need not password.

Menù DHW

Touching the icon

It shows only the details of the program in the

1-2-3 ... period.

Page is loading ...

Unical OSA S User manual

This manual is also suitable for

Unical OSA S User manual

Related papers

Other documents