JasonL SFBB616PT, SFCB616PT, SFWB616PT Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the JasonL SFBB616PT Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION GUIDE
San Fran System
6 Person Workstation
Size: 1600x800 mm
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver.
Leg x8
Adjustable Foot x8
Leg Cable Cover x8
Rail Lengths x4 (1320mm)
Rail Widths x4 (620mm)
2 Way Connector x4
2 Way Connector Cap x4
3 Way Connector x4
3 Way Connector Cap x4
Rail Space Bracket x4
Slot Nut x12
Table Top x6 (1600mm x 800mm)
Support Connector x8
Rail Widths x2 (1550mm)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
M8x20mm Dome Head x4
M8x12mm Dome Head x28
M8x20mm Cap Head x8
M5x20mm Self Tapping x40
14
15
16
17
COMPONENTS
SCREWS
INSTALLATION GUIDE
San Fran System
6 Person Workstation
Size: 1600x800 mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
12 15
13
9
16
4
14
8
31
2
6
7
5
15
10
14
11
INSTALLATION GUIDE
San Fran System
6 Person Workstation
Size: 1600x800 mm
01 02
04
Slide the 2 way and 3 way connectors over each leg, and securely lock into place
using M8x20mm cap head bolts.
Loosely connect the longer M8x20mm dome head bolt and slot nut through the
rail spacer bracket. Slide onto required rails and fully tighten in place.
Securely connect legs to rails lengths using the shorter M8x20mm dome
head bolts.
03
Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05
Securely connect legs to rails widths using the shorter M8x12mm dome head
bolts.
Ensure the work surfaces are centered over the frame. Fully tighten all M5x20mm
self tapping screws through each leg rail spacer and support connector bracket
into the work surfaces.
Cancel any power box cable using the magnetic leg cable covers.
INSTALLATION GUIDE
San Fran System
6 Person Workstation
Size: 1600x800 mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
06
07
/