Lightolier C4A120 User manual

Category
Floodlights
Type
User manual

Lightolier C4A120 is a recessed downlight with a 4 1/2" aperture and is designed for use with incandescent lamps up to 100W. It is suitable for damp locations and has an AirSeal® housing that minimizes air leakage to less than 2CFM at 1.57 PSF. The downlight has a matte black finish and comes with a frame-in kit for easy installation.

The C4A120 is compatible with a variety of reflector trims, which can be used to create different lighting effects. For example, the open downlight trim can be used for general illumination, while the adjustable accent trim can be used to highlight specific objects or areas. The wall washer/downlight trim can be used to create a more diffuse light, while the lensed wall washer trim can be used to create a more focused light.

Lightolier C4A120 is a recessed downlight with a 4 1/2" aperture and is designed for use with incandescent lamps up to 100W. It is suitable for damp locations and has an AirSeal® housing that minimizes air leakage to less than 2CFM at 1.57 PSF. The downlight has a matte black finish and comes with a frame-in kit for easy installation.

The C4A120 is compatible with a variety of reflector trims, which can be used to create different lighting effects. For example, the open downlight trim can be used for general illumination, while the adjustable accent trim can be used to highlight specific objects or areas. The wall washer/downlight trim can be used to create a more diffuse light, while the lensed wall washer trim can be used to create a more focused light.

Calculite
®
Evolution Recessed Downlight C4A120
Page 1 of 1 4 1/2” Aperture Incandescent 120V Non-IC AirSeal
®
Frame-In Kit
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Housing: Steel, 0.03" (22 ga.). Top Cover: Aluminum, 0.04" (14 ga.). Matte
black finish. AirSeal
®
housing minimizes air leakage to less than 2CFM at
1.57 PSF (or 75pa).
2. Mounting Frame: Die-cast aluminum for dry or plaster ceilings. Locks into
position along length of mounting bars with locking screws.
3. Retaining Springs: Precision-tooled steel springs secure reflector trim to
mounting frame for quick, tool-less installation.
4. Mounting Bars: Galvanized steel, 0.06" (16 ga.). Bars pivot for easy instal-
lation and wire in below ceiling line. Bars extend to accommodate 16" to 24"
O.C. joist spacing. Bars can accommodate 12" O.C. joist spacing after a slight
field modification (see instruction sheet). Integral self-tapping screws for
securing to wood or metal construction. Built-in tabs for locking to T-bars
without the need of accessories.
5. Snap-In Connectors: Keyed to accept power and socket harnesses which
are provided with reflector trim.
6. Junction Box: Galvanized steel .063" (14 ga.). UL Listed for maximum of 8
No. 12 AWG 90°C through branch circuit conductors. Accessible from inside
and outside of fixture. Outside J-Box door is hinged for maximum opening.
Snap-in plug is provided on inside cover for quick connection to power harness.
7. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
8. Reflector Trim: Compatible reflector trims are listed above. See separate
reflector trim specification sheets for complete catalog numbers and details.
Options and Accessories
Chicago Plenum: Add LC to frame suffix.
Label
UL Listed (Suitable for damp locations), I.B.E.W.
Air leakage is less than 2CFM at 75pa, tested in accordance with ASTM E-283.
Ceiling Cutout: 5 1/16” (129 mm) Dia.
Frame-In Kit Reflector Trim
C4A120 Open Open Adjustable Open Lensed
Downlight Downlight Accent Wall Washer/Downlight Wall Washer
C4AD C4P20D C4P20A C4AW C4P20L
100W A19, MB19 50W PAR20 50W PAR20 100W A19, MB19 50W PAR20
100W BT15 75W PAR16 75W PAR16 100W BT15 75W PAR16
75W BR19, R20
US Patent 5,957,573. Other US and Foreign Patents Pending.
Adjustment
(mounting bars included)
13 3/4" to 24"
9 1/2" Dia.
14 3/8" O.A.
12 3/8"
7 3/4"
*7 3/4" min. is for
up to 3/4" thick ceiling.
8 1/4" max.
7 3/4" min.*
6
73125
7"
1 1/4" Max. Ceiling Thk.
4
  • Page 1 1

Lightolier C4A120 User manual

Category
Floodlights
Type
User manual

Lightolier C4A120 is a recessed downlight with a 4 1/2" aperture and is designed for use with incandescent lamps up to 100W. It is suitable for damp locations and has an AirSeal® housing that minimizes air leakage to less than 2CFM at 1.57 PSF. The downlight has a matte black finish and comes with a frame-in kit for easy installation.

The C4A120 is compatible with a variety of reflector trims, which can be used to create different lighting effects. For example, the open downlight trim can be used for general illumination, while the adjustable accent trim can be used to highlight specific objects or areas. The wall washer/downlight trim can be used to create a more diffuse light, while the lensed wall washer trim can be used to create a more focused light.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI