Lightolier C6DA120 is a 6" Aperture Incandescent 120V Non-IC AirSeal® Frame-In Kit compatible with a variety of reflector trims, making it a versatile choice for various lighting needs.
Its key features include:
- AirSeal® housing: Minimizes air leakage, reducing energy loss and improving efficiency.
- Precision-tooled steel springs: Secure reflector trim for quick and tool-less installation.
- Galvanized steel mounting bars: Extendable to accommodate different joist spacing, providing easy installation.
- Galvanized steel junction box: UL listed for safe operation, ensuring reliable electrical connections.
Lightolier C6DA120 is a 6" Aperture Incandescent 120V Non-IC AirSeal® Frame-In Kit compatible with a variety of reflector trims, making it a versatile choice for various lighting needs.
Its key features include:
- AirSeal® housing: Minimizes air leakage, reducing energy loss and improving efficiency.
- Precision-tooled steel springs: Secure reflector trim for quick and tool-less installation.
- Galvanized steel mounting bars: Extendable to accommodate different joist spacing, providing easy installation.
- Galvanized steel junction box: UL listed for safe operation, ensuring reliable electrical connections.
4
12 1/4" Dia.
included)
(mounting bars
Adjustment
13 3/4" to 24"
*11 1/8" min. is for
up to 3/4" thick ceiling.
1 1/4" Max. Ceiling Thk.
11 5/8" max.
11 1/8" min.*
6
7
3
9 1/8"
15 3/8"
125
10 3/8"
Ceiling Cutout: 6 11/16" Dia.
Frame-In Kit Reflector Trim
C6DA120 Open Open Adjustable Open Lensed
Downlight Downlight Accent Wall Washer/Downlight Wall Washer
C6AD C6P38D C6P38A C6AW C6P38L
100W BT15, MB19 250W PAR38 120W PAR38 100W BT15, MB19 120W PAR38
150W A21 200W A21
Calculite
®
Evolution Recessed Downlighting C6DA120
Page 1 of 1 6" Aperture Incandescent 120V Non-IC AirSeal
®
Frame-In Kit
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Housing: Steel, 0.03" (22 ga.). Top Cover: Aluminum, 0.04" (14 ga.). Matte
black finish. AirSeal
®
housing minimizes air leakage to less than 2CFM at
1.57 PSF (or 75pa).
2. Mounting Frame: Die-cast aluminum for dry or plaster ceilings. Locks into
position along length of mounting bars with locking screws.
3. Retaining Springs: Precision-tooled steel springs secure reflector trim to
mounting frame for quick, tool-less installation.
4. Mounting Bars: Galvanized steel, 0.06" (16 ga.). Bars pivot for easy instal-
lation and wire-in below ceiling line. Bars extend to accommodate 16" to 24"
O.C. joist spacing. Bars can accommodate 12" O.C. joist spacing after a slight
field modification (see instruction sheet). Integral self-tapping screws secure
to wood or metal construction. Built-in tabs for locking to T-bars without the
need of accessories.
5. Snap-In Connectors: Keyed to accept power and socket harnesses which
are provided with reflector trim.
6. Junction Box: Galvanized steel .063" (14 ga.). UL listed for maximum of 8
No. 12 AWG 90°C through branch circuit conductors. Accessible from inside
and outside of fixture. Outside J-Box door is hinged for maximum opening.
Snap-in plug is provided on inside cover for quick connection to power har-
ness.
7. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
8. Reflector Trim: Compatible reflector trims are listed above. See separate
reflector trim specification sheets for complete catalog numbers and details.
Options & Accessories
Chicago Plenum Consult Factory
Labels
UL Listed (suitable for damp locations), I.B.E.W.
Air leakage is less than 2cfm at 75pa, tested in accordance with ASTM E283.
US Patent No. 5,957,573. Other US and Foreign Patents Pending.
-
1
Lightolier C6DA120 is a 6" Aperture Incandescent 120V Non-IC AirSeal® Frame-In Kit compatible with a variety of reflector trims, making it a versatile choice for various lighting needs.
Its key features include:
- AirSeal® housing: Minimizes air leakage, reducing energy loss and improving efficiency.
- Precision-tooled steel springs: Secure reflector trim for quick and tool-less installation.
- Galvanized steel mounting bars: Extendable to accommodate different joist spacing, providing easy installation.
- Galvanized steel junction box: UL listed for safe operation, ensuring reliable electrical connections.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lightolier C6D120 User manual
-
-
Lightolier 3 3/4” Incandescent IC Insulated Ceiling Frame-In Kit Install Instructions
-
-
-
-
-
-
-